|
General Electric Company |
GE
Intelligent Platforms
VMIACC-BT10*
Specifications
DIN Rail Transition Module for
Euro-DIN C 64-Pin, C 96-Pin, and
C/2 32-Pin Connectors
Features:
• DIN rail mount (15 or 35 mm)
• Interconnects GE’s I/O boards with field wiring
• Provides easy-to-use lift clamp terminal blocks
• High-density design reduces cabinet space
• Accepts 24 to 12 AWG
• Fits standard DIN rails
• Interfaces with most GE I/O boards via mass-terminated
cables
• IEC 664/IEC 664 A/DIN VDE; DIN VDE 0160 (in parts) compliant
VMIACC-BT10 DIN Rail Transition Module for Euro-DIN C 64-Pin, C 96-Pin, and C/2 32-Pin Connectors
Ordering Options
Sept. 27, 2010 800-800563-000 B
A BC D E F
VMIACC-BT10
–
A = Male or Female
0 = Female
1 = Male
BC = Number of Pins
32 = Euro-DIN C/2 32-Pin Connector
64 = Euro-DIN C 64-Pin Connector
96 = Euro-DIN C 96-Pin Connector
For Ordering Information, Call:
1-800-322-3616 or 1-256-880-0444 • FAX (256) 882-0859
Email: [email protected]
Web Address: www.ge-ip.com
Copyright © 2010 GE Intelligent Platforms Embedded Systems, Inc.
All Rights Reserved.
Specifications subject to change without notice.
Functional Characteristics
Introduction: The VMIACC-BT10* DIN rail transition module
provides a high-density, Euro-DIN C connector to three-level
terminal transition in an easy-to-use DIN rail mount form factor.
As shown in Figure 1, the VMIACC-BT10 simplifies field wiring
interfaces by providing convenient lift clamp-style terminals
while preserving the space efficiency of a pin-and-socket I/O
board interface. I/O boards and transition modules can be
interconnected by either cost-effective mass-terminated flat
cables, or by specialty cables as the application demands. The
following GE I/O boards are directly compatible with these
modules.
Compatible I/O Boards:
VMIVME-1101
VMIVME-2200
VMIVME-1110
VMIVME-2210
VMIVME-1111
VMIVME-2510B
VMIVME-1128
VMIVME-2511
VMIVME-1129
VMIVME-2528
VMIVME-1130
VMIVME-2131
VMIVME-1150
VMIVME-2532A
VMIVME-1160A
VMIVME-2533
VMIVME-1182
VMIVME-2536
VMIVME-2120
VMIVME-2540
VMIVME-2127
VMIVME-3113A
VMIVME-2128
VMIVME-3118
VMIVME-2131
VMIVME-3122
VMIVME-2170A
VMIVME-3126A
VMIVME-3128
VMIVME-3413
VMIVME-3417A
VMIVME-3418
VMIVME-3419
VMIVME-3451
VMIVME-3456
VMIVME-3457
VMIVME-3459
VMIVME-4140
Compatible I/O Cables:
Number of Connector
Pins Type
64 pin
IDC
96 pin
IDC
C/2 32 pin
IDC
Cable
VMIVME-000-64-xxx
VMIVME-000-96-xxx
VMIVME-000-32-xxx
Electrical Data
The ampacity of the transition panel is limited by the DIN
connectors of a 1 A per terminal.
Maximum Current: 1 A per terminal
Maximum Voltage: 125 VAC
Terminal Block Materials
Clamp: Steel, galvanized, and chromated
Wire Protection: CuZn, brass, prenickeled, and 5 μ tin-plated
Screw: Steel, galvanized, and chromated
Physical/Environmental Specifications
Dimensions:
Height
Width
Depth
3.03 in.
6.65 in. (C 96), 5.321 in. (C 64 and C/2 32)
2.73 in. (mounted)
Screw: M3
Maximum Wire Diameter: Solid wired from 0.2 to 4 mm (12 to
22 AWG). Fine stranded wire from 0.2 to 2.5 mm2 (12 to 24 AWG).
Trademarks
* indicates a trademark of GE Intelligent Platforms, Inc. and/or
its affiliates. All other trademarks are the property of their
respective owners.
2
|