|
|
PDF BH1417 Data sheet ( Hoja de datos )
| Número de pieza | BH1417 | |
| Descripción | FM Transmitter | |
| Fabricantes | ETC | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de BH1417 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
BH1417 FM Transmitter
This is the latest BH1417 FM Transmitter design from RHOM that includes
a lot of features in one small package. It comes with pre-emphasis, limiter so that
the music can be transmitted at the same audio level, stereo encoder for stereo
transmission, low pass filter that blocks any audio signals above 15KHz to prevent
any RF interference, PLL circuit that provides rock solid frequency transmission (no
more frequency drift), FM oscillator and RF output buffer.
There are 14 possible transmission frequencies with 200KHz increments that
users can select with a 4-DIP switch. Lower band frequencies start from 88.7 up to
89.9 MHz, and upper band frequencies start from 107.7 up to 108.9 MHz.
BH1417 can be supplied with 4 - 6 voltage and consumes only around 30mA,
providing 20mW output RF power. BH1417 provides 40dB channel separation which
is pretty good, although older BA1404 FM Transmitter chip provides slightly better
45dB channel separation.
BH1417 is only available in SOP22 IC case so this may be an inconvenience
for some folks. On the other hand, because the chip is smaller than regular DIP-
based ICs it is possible to fit the entire transmitter on a small PCB.
The bad news is that BH1417 requires 7.6MHz crystal oscillator, which is very
hard to find. The good news is that you can use 7.68 MHz crystal instead, which is
easier to find. In fact our BH1417 transmitter prototype (schematic shown above)
uses 7.68 MHz crystal. This has absolutely no effect on stereo encoding process, we
have tested it and stereo sound is crystal clear. The transmitted frequency on the
other hand will be shifted up by exactly 1MHz (example: 88.1 MHz to 89.1 MHz)
which is perfectly fine. The frequencies that are used in this project have been
adjusted by 1MHz already so no additional conversion is necessary.
BH1417 chip may also be used a stand alone stereo encoder. The advantage
of that is that you have full freedom of using a transmitter & amplifier of your choice.
You will still have a pre-emphasis, limiter, stereo encoder and low pass filter in one
small package because very few external components are required for these blocks.
http://www.Datasheet4U.com
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet BH1417.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| BH1414K | Wireless Audio Link IC |  ROHM Semiconductor |
| BH1415F | Wireless Audio Link IC | ROHM Semiconductor |
| BH1416F | Wireless Audio Link IC | ROHM Semiconductor |
| BH1417 | FM Transmitter | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |