|
|
PDF CCVGA7C9 Data sheet ( Hoja de datos )
| Número de pieza | CCVGA7C9 | |
| Descripción | VGA OR DVI-I PORT COMPANION CIRCUIT | |
| Fabricantes | Unisonic Technologies | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CCVGA7C9 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
UNISONIC TECHNOLOGIES CO., LTD
CCVGA7C9
Preliminary
VGA OR DVI-I PORT
COMPANION CIRCUIT
TVS
DESCRIPTION
The UTC CCVGA7C9 is an ESD solution for the VGA or DVI-I
port connector. This device integrates ESD protection for all
signals, level shifting for the DDC signals and buffering for the
SYNC signals. ESD protection for the VIDEO, DDC and SYNC
lines is implemented with low-capacitance current steering
diodes.
Separate positive supply rails are provided for the VIDEO,
DDC and SYNC channels to facilitate interfacing with low voltage
video controller ICs to provide design flexibility in
multi-supply-voltage environments.
Two non-inverting drivers provide buffering for the HSYNC and VSYNC signals from the video controller IC
(SYNC1, SYNC2). These buffers accept TTL input levels and convert them to CMOS output levels that swing
between Ground and VCC_SYNC, which is typically 5V. Additionally, each driver has a series termination resistor (RT)
connected to the SYNC_OUT pin, eliminating the external termination resistors typically required for the HSYNC and
VSYNC lines of the video cable. There are three versions with different values of RT to allow termination at typically
65Ω (UTC CCVGA7C9−00) or 15Ω (UTC CCVGA7C9−02).
Two N-channel MOSFETs provide the level shifting function required when the DDC controller is operated at a
lower supply voltage than the monitor. The gate terminals for the MOSFETs (VCC_DDC) should be connected to the
supply rail (typically 3.3 V) that supplies power to the transceivers of the DDC controller.
All ESD diodes are designed to safely handle the high current spikes specified by IEC-61000-4-2 Level 4 (±8kV
contact discharge if CBYP is present, ±4kV if not). The ESD protection for the DDC signal pins are designed to
prevent “back current” when the device is powered down while connected to a monitor that is powered up.
FEATURES
* 7 Channels of ESD protection for all VGA port connector pins
meeting IEC-61000-4-2 Level 4 ESD requirements (±8kV
contact discharge)
* Includes ESD protection, level-shifting, buffering and sync
impedance matching
* Very low loading capacitance from ESD protection diodes on
VIDEO lines (4pF maximum)
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
CCVGA7C9L-R16-T
CCVGA7C9G-R16-T
CCVGA7C9L-R16-R
CCVGA7C9G-R16-R
* 5V drivers for HSYNC and VSYNC lines
* Integrated impedance matching resistors on
sync lines
* Bi-directional level shifting N-Channel FETs
provided for DDC_CLK & DDC_DATA channels
* Backdrive protection on DDC lines
Package
SSOP-16
SSOP-16
Packing
Tube
Tape Reel
www.unisonic.com.tw
Copyright © 2013 Unisonic Technologies Co., Ltd
1 of 6
QW-R223-015.a
http://www.Datasheet4U.com
1 page  
CCVGA7C9
Preliminary
TVS
ELECTRICAL CHARACTERISTICS(Cont.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
SYNC Driver H => L Propagation
Delay
tPHL CL=50pF, VCC=5.0V, Input tR and tF≤5ns
12 ns
SYNC Driver Output Rise & Fall
Times
tR, tF CL=50pF, VCC=5.0V, Input tR and tF≤5ns
4
ns
ESD Withstand Voltage (Note 3)
VESD
VCC_VIDEO=VCC_SYNC=5V
±8 kV
Notes: 1. All parameters specified over standard operating conditions unless otherwise noted.
2. These parameters apply only to the SYNC drivers. Note that ROUT=RT + RBUFFER.
3. The SYNC_OUT pins on the UTC CCVGA7C9-02 are guaranteed for 2kV HBM ESD protection.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R223-015.a
http://www.Datasheet4U.com
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet CCVGA7C9.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CCVGA7C5 | VGA PORT COMPANION CIRCUIT | Unisonic Technologies |
| CCVGA7C9 | VGA OR DVI-I PORT COMPANION CIRCUIT | Unisonic Technologies |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |