|
iWave |
System On Module RainboW-G15M-MXM
i.MX6 MXM SOM Module
APPLICATIONS : Automotive Infotainment, Advanced HMI,
Telematics, Digital Signage, Healthcare and Medical Equipments
iW-RainboW-G15M-MXM
HIGHLIGHTS
CPU
i.MX6 1GHz/800MHz Cortex A9 Q/D/U/S
Optional SPI Flash*
Optional NAND Flash*
Expansion Connector - 100 Pins**
85mmx85mm MXM3 compatible
Temperature
Debug Support
Onboard JTAG header**
Operating Systems
Linux 3.0.35, Android 4.0.4
*Optional features not supported by default
** Not populated in mass production SOM
Note: device drivers provided are for specific interface chipsets which are used in iWave's carrier board
Free Datasheet http://www.datasheet4u.com/
SPI Flash - 4 MB
(Optional)
i.MX6 MXM Module BLOCK DIAGRAM
(Optional)
MIPI-DSI x 1
10/100/1000
ENET
MLB
MIPI DSI
HDMI Tx1-4
I2S Audio x (1/3)
Onboard
Regulators
Camera (8bit) x 2
CSIO
UART x (3/5)
* RGMII signals are shared with on board Gigabit Eth PHY & expansion connector
** eSDHC3 port will be share uSD and MXM connector
# NAND Flash is optional & these signals are also routed to MXM connector & some of the signals are shared with eMMC
Linux 3.0.35
Android 4.0.4*
WEC7*
* Optional
RainboW-G15D-MXM
(i.MX6 MXM Development Kit)
Ordering the i.MX6 MXM SOM
The board can be ordered online from the iWave Website
http://www.iwavesystems.com/webforms
Free Datasheet http://www.datasheet4u.com/
|