파트넘버.co.kr LC-46LE810UN 데이터시트 PDF


LC-46LE810UN 반도체 회로 부품 판매점

(LC-xxLE810UN) LCD COLOR TELEVISION Manual



Sharp 로고
Sharp
LC-46LE810UN 데이터시트, 핀배열, 회로
LC-40/46/52/60LE810UN (1st Edition)
SERVICE MANUAL
No. S30E840LE810U
LCD COLOR TELEVISION
LC-40LE810UN
LC-46LE810UN
LC-52LE810UN
MODELS LC-60LE810UN
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
CONTENTS
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY
PRECAUTION....................................................i
PRECAUTIONS A PRENDRE LORS DE
LA REPARATION ..............................................ii
PRECAUTIONS FOR USING LEAD-FREE
SOLDER .......................................................... iii
OUTLINE
MAJOR SERVICE PARTS ...............................iv
[2] REMOVING OF MAJOR PARTS
(LC-46LE810UN) ........................................... 4-6
[3] REMOVING OF MAJOR PARTS
(LC-52LE810UN)......................................... 4-11
[4] REMOVING OF MAJOR PARTS
(LC-60LE810UN) ......................................... 4-16
CHAPTER 5. ADJUSTMENT
[1] ADJUSTMENT PROCEDURE ......................5-1
[2] PUBLIC MODE SETTING PROCEDURE......5-15
CHAPTER 1. SPECIFICATIONS
[1] SPECIFICATIONS (LC-40/46LE810UN)........ 1-1
[2] SPECIFICATIONS (LC-52/60LE810UN)........ 1-2
CHAPTER 2. OPERATION MANUAL
[1] Parts Name ................................................... 2-1
[2] OPERATION MANUAL ................................. 2-3
CHAPTER 6. TROUBLESHOOTING TABLE
[1] TROUBLESHOOTING TABLE ......................6-1
[2] LED flashing specification at the time of an
error (Center icon LED used) ......................6-14
CHAPTER 7. MAJOR IC INFORMATIONS
[1] MAJOR IC INFORMATIONS .........................7-1
CHAPTER 3. DIMENSIONS
[1] DIMENSIONS (LC-40LE810UN)................... 3-1
[2] DIMENSIONS (LC-46LE810UN)................... 3-2
[3] DIMENSIONS (LC-52LE810UN)................... 3-3
[4] DIMENSIONS (LC-60LE810UN)................... 3-4
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS
(LC-40LE810UN) .......................................... 4-1
CHAPTER 8. OVERALL WIRING/SYSTEM BLOCK
DIAGRAM
[1] OVERALL WIRING DIAGRAM ......................8-1
[2] SYSTEM BLOCK DIAGRAM .........................8-2
Parts Guide
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
Free Datasheet http://www.datasheet4u.com/


LC-46LE810UN 데이터시트, 핀배열, 회로
LC-40/46/52/60LE810UN (1st Edition)
LSCA-40FLEE8T10YUNPRECAUTION
Service Manual
IMPORTANT SERVICE SAFETY PRECAUTION
Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the
servicing guidelines which follow:
„WARNING
1. For continued safety, no modification of any circuit should be
attempted.
2. Disconnect AC power before servicing.
C A U T I O N : F O R C O N T I N U E D PROTECTION
AGAINST A RISK OF FIRE REPLACE ONLY WITH
SAME TYPE FUSE.
F7000 (250V 3.5A) (LC-40LE810UN)
F7001 (250V 3.5A) (LC-40LE810UN)
F7000 (250V 5A) (LC-46/52/60LE810UN)
F7001 (250V 5A) (LC-46/52/60LE810UN)
• Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral-
leled by a 0.15µF capacitor in series with all exposed metal cabinet
parts and a known earth ground, such as electrical conduit or elec-
trical ground connected to an earth ground.
• Use an AC voltmeter having with 5000 ohm per volt, or higher, sen-
sitivity or measure the AC voltage drop across the resistor.
• Connect the resistor connection to all exposed metal parts having a
return to the chassis (antenna, metal cabinet, screw heads, knobs
and control shafts, escutcheon, etc.) and measure the AC voltage
drop across the resistor.
All checks must be repeated with the AC cord plug connection
reversed. (If necessary, a nonpolarized adaptor plug must be used
only for the purpose of completing these checks.)
Any reading of 0.75 Vrms (this corresponds to 0.5 mA rms AC.) or
more is excessive and indicates a potential shock hazard which
must be corrected before returning the monitor to the owner.
„BEFORE RETURNING THE RECEIVER (Fire &
Shock Hazard)
Before returning the receiver to the user, perform the following
safety checks:
3. Inspect all lead dress to make certain that leads are not pinched,
and check that hardware is not lodged between the chassis and
other metal parts in the receiver.
4. Inspect all protective devices such as non-metallic control knobs,
insulation materials, cabinet backs, adjustment and compartment
covers or shields, isolation resistor-capacitor networks, mechanical
insulators, etc.
5. To be sure that no shock hazard exists, check for leakage current in
the following manner.
• Plug the AC cord directly into a 120 volt AC outlet.
DVM
AC SCALE
1.5k ohm
10W
0.15 µF
TEST PROBE
TO EXPOSED
METAL PARTS
CONNECT TO
KNOWN EARTH
GROUND
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD color television have
special safety-related characteristics.
For continued protection, replacement parts must be identical to those
used in the original circuit.
These characteristics are often not evident from visual inspection, nor
can protection afforded by them be necessarily increased by using
replacement components rated for higher voltage, wattage, etc.
The use of a substitute replacement parts which do not have the same
safety characteristics as the factory recommended replacement parts
shown in this service manual, may create shock, fire or other hazards.
Replacement parts which have these special safety characteristics are
identified in this manual; electrical components having such features
are identified by " " and shaded areas in the Replacement Parts List
and Schematic Diagrams.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
i
Free Datasheet http://www.datasheet4u.com/




PDF 파일 내의 페이지 : 총 30 페이지

제조업체: Sharp

( sharp )

LC-46LE810UN data

데이터시트 다운로드
:

[ LC-46LE810UN.PDF ]

[ LC-46LE810UN 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


LC-46LE810UN

(LC-xxLE810UN) LCD COLOR TELEVISION Manual - Sharp