|
|
PDF N121X5-L01 Data sheet ( Hoja de datos )
| Número de pieza | N121X5-L01 | |
| Descripción | TFT LCD | |
| Fabricantes | Chi Mei | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de N121X5-L01 (archivo pdf) en la parte inferior de esta página. Total 31 Páginas | ||
|
No Preview Available !
www.DataSheet.in
1 page  
Issued Date: Jul. 21, 2005
Model No.: N121X5 -L01
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature
Operating Ambient Temperature
Shock (Non-Operating)
Vibration (Non-Operating)
Symbol
TST
TOP
SNOP
VNOP
Value
Min. Max.
-20 +60
0 +50
- 220
- 1.5
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta ≦ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation .
Unit Note
ºC (1)
ºC (1), (2)
G (3), (5)
G (4), (5)
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
5 Storage Range
-40 -20
0 20 40
Temperature (ºC)
60 80
Note (2) The temperature of panel surface should be 0 ºC Min. and 50 ºC Max.
Note (3) 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 200 Hz, 0.5 Hr / Cycle, 1 cycles for each X, Y, Z. The fixing condition is shown as below:
At Room Temperature
Side Mount Fixing Screw
Gap=2mm
LCD Module
Bracket
Side Mount Fixing Screw
Stage
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
www.DataSheet.in
5 / 31
Version 2.2
5 Page 
Issued Date: Jul. 21, 2005
Model No.: N121X5 -L01
Approval
Note (8) About operating current min 2.0mA , lamp maker has some advice as below
(Reference) Light quantity adjustment method
Explanation and comparison of the kind of tone light:
① Lamp current wave-like by the adjustment of the current.
P-P LEVEL DOWN
Tone light
② Lamp current wave-like by the adjustment of the burst.
P-P LEVEL =
OFF:20%
ON:80%
Comparative table
Method
①current
②burst
Backlight efficiency (INV＋LAMP)
Good ( 75 % 〜 85% )
Bad ( 65 % 〜 75% )
Tone light rate (%)
58
10
Circuitry
Complicated
Easy
Method of case that Lamp current MIN2.0mA is controlled.
It is the setting of minimum 2.0mA (MIN) to Lamp current 6.0mA in the lamp specification. The burst is
excellent for circuitry. The marker proposes that pays attention to the following contents.
www.DataSheet.in
11 / 31
Version 2.2
11 Page | ||
| Páginas | Total 31 Páginas | |
| PDF Descargar | [ Datasheet N121X5-L01.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| N121X5-L01 | TFT LCD | Chi Mei |
| N121X5-L02 | TFT Liquid Crystal Display module | Chi Mei |
| N121X5-L03 | LCD Module | Chi Mei |
| N121X5-L04 | TFT LCD | Chi Mei |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |