|
|
PDF RF5365 Data sheet ( Hoja de datos )
| Número de pieza | RF5365 | |
| Descripción | 2.4GHZ 802.11b/g/n WLAN Front End Module | |
| Fabricantes | RF Micro Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de RF5365 (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
RF5365
2.4GHz to 2.5GHz, 802.11b/g/n WiFi
Front End Module
The RF5365 provides an integrated front end solution for WiFi
802.11b/g/n and Bluetooth® systems. The ultra-small form factor
package and integrated matching greatly reduces the number of
external components and layout area in the customer application. This
simplifies the total front end solution by reducing the bill of materials,
system footprint, and assembly cost.
The RF5365 integrates a 2.4 GHz Power Amplifier (PA), 2170 MHz
notch filter for coexistence with cellular radios, second harmonic
attenuation, power detector coupler for improved accuracy, and an
SP3T switch capable of simultaneous reception for WiFi and
Bluetooth®. The device is provided in a 2.5 mm x 2.5 mm x 0.5 mm, 12-
pin package. This module meets or exceeds the RF front end needs of
IEEE 802.11b/g/n WiFi RF systems.
RX 1
12
11
Vreg 2
2fo
Pdetect
Coupler
TX 3
4
2170
MHz Filter
5
10
9 BT
8 GND
7 ANT
6
RF5365
Package: QFN, 12-pin,
2.5mm x 2.5mm x 0.5mm
Features
■ Integrated 2.4GHz to 2.5GHz b/g/n
Amplifier, SP3T Switch, and Power
Detector Coupler
■ Single Supply Voltage 3.0V to 4.8V
■ Output Power: 11b = 21dBm
Meeting Spectral Mask 11n =
18dBm at <3% EVM
■ Low Height Package, Suited for
SiP and CoB Designs
Applications
■ Cellular handsets
■ Mobile devices
■ Tablets
■ Consumer electronics
■ Gaming
■ Netbooks/Notebooks
■ TV/monitors/video
■ SmartEnergy
Functional Block Diagram
Ordering Information
RF5365SQ
Standard 25 piece bag
RF5365SR
Standard 100 piece reel
RF5365TR7
Standard 2500 piece reel
RF5365PCK-410
Fully assembled evaluation board w/5 piece bag
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140527
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 11
1 page  
RF5365
Performance Plots
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140527
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
5 of 11
5 Page 
RF5365
Pin Names and Descriptions
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Pkg Base
Name
RX OUT
VREG
TX IN
VCC
VCC
POWER DETECT
ANT
GND
BT PORT
C_RX
C_BT
C_TX
GND
Description
Receive port for 802.11b/g/n band. Internally matched to 50Ω. DC block required.
Regulated voltage for the PA bias control circuit. An external bypass capacitor may be needed on the VREG
line for decoupling purposes.
RF input for the 802.11b/g/n PA. Input is matched to 50Ω. DC block required.
Supply voltage for the FEM. Power down pin. Apply <0.6 VDC to power down the power amplifier stages. Apply
2.5 VDC to 3.6 VDC to power up. If function is not desired, pin may be connected to VCC or VREG.
Supply voltage for the FEM.
Power detector voltage for TX section. PDET voltage varies with output power. May need external decoupling.
Port matched to 50Ω. DC block required.
Ground connection.
Bluetooth® RF Port. DC block required.
Control pin for WiFi Receive Port. Please see truth table for proper settings.
Control pin for Bluetooth® Port. Please see truth table for proper settings.
Control pin for WiFi Transmit Port. Please see truth table for proper settings.
Ground connection. The backside of the package should be connected to the ground plane through a short
path, i.e., PCB vias under the device are recommended.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140527
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
11 of 11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet RF5365.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| RF5365 | 2.4GHZ 802.11b/g/n WLAN Front End Module | RF Micro Devices |
| RF5365 | 2.4GHZ 802.11b/g/n WLAN Front End Module | RF Micro Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |