|
|
Número de pieza | G121S1-L01 | |
Descripción | TFT LCD | |
Fabricantes | Chi Mei | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de G121S1-L01 (archivo pdf) en la parte inferior de esta página. Total 24 Páginas | ||
No Preview Available ! Issued Date: May. 2, 2006
Model No.: G121S1-L01
Preliminary
TFT LCD Preliminary Specification
MODEL NO.: G121S1-L01
Customer:
Approved by:
Note:
www.DataSheet4U.com
Liquid Crystal Display Division
QRA Division.
OA Head Division.
Approval
Approval
1 / 25
Version 1.1
1 page Issued Date: May. 2, 2006
Model No.: G121S1-L01
Preliminary
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal (H)
Module Size Vertical (V)
Depth (D)
Weight
I/F connector mounting
position
Min. Typ. Max.
260.0
260.5
261.0
203.5
204.0
204.5
11.7 12.2 12.7
- - 660
The mounting inclination of the connector makes
the screen center within ±0.5mm as the horizontal.
Unit
mm
mm
mm
g
Note
(1)
-
(2)
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
(2) Connector mounting position
+/- 0.5mm
www.DataSheet4U.com
5 / 25
Version 1.1
5 Page Issued Date: May. 2, 2006
Model No.: G121S1-L01
Preliminary
The output of the inverter must have symmetrical (negative and positive) voltage waveform and
symmetrical current waveform. (Unsymmetrical ratio is less than 10%) Please do not use the inverter
which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may
produce interface with horizontal synchronous frequency and as a result this may cause beat on the
display. Therefore lamp frequency shall be as away possible from the horizontal synchronous
frequency and from its harmonics in order to prevent interference.
Requirements for a system inverter design, which is intended to have a better display performance, a
better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its
leakage current.
a. The asymmetry rate of the inverter waveform should be 10% below;
b. The distortion rate of the waveform should be within 2 ± 10%;
c. The ideal sine wave form shall be symmetric in positive and negative polarities.
* Asymmetry rate:
I p | I p – I –p | / Irms * 100%
I -p * Distortion rate
I p (or I –p) / Irms
www.DataSheet4U.com
11 / 25
Version 1.1
11 Page |
Páginas | Total 24 Páginas | |
PDF Descargar | [ Datasheet G121S1-L01.PDF ] |
Número de pieza | Descripción | Fabricantes |
G121S1-L01 | TFT LCD | Chi Mei |
G121S1-L01-V467 | TFT LCD | Apollo |
G121S1-L02 | TFT Liquid Crystal Display module | Chi Mei |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |