FR-E520-xxK-NA 판매점 - Variable Frequency Drives

FR-E520-xxK-NA 반도체 회로 부품 판매점

Variable Frequency Drives

Mitsubishi

E500 Series

The cost-effective variable speed control solution for general purpose applications.

I Up to 1 Hp at 115 VAC

I Up to 10 Hp at 240 VAC, 480 and 600 VAC

I Advanced Magnetic Flux Vector Control

I Auto-tuning

I 50°C maximum ambient temperature

I RS-485 serial communication (standard)

I Selectable cooling fan operation mode

I Built-in PID control

I Adjustable carrier frequency (0.7kHz to

14.5kHz)

I Optional keypad interface (FR-PA02-02)

I Compatible with FR-PU04 user interface

I UL & cUL listed / CE marked

I Available configuration software for Windows® 95 / 98

I Open-network communication options

I DeviceNet

I CC-Link

I Profibus DP (400V and 600V only)

I Brake Transistor

www.DataSheet4U.com

Inverter Type

FR-E520 – 0.1 K – NA

Voltage

115

Symbol

E510W

E520

E540

E560

Voltage Class

Single-phase 100V class

Three-phase 200V class

Three-phase 400V class

Three-phase 600V class

Inverter

capacity

“kW”

208/230

460

600

1/8 – 1 Hp

Horsepower

E500 Selection

Rating (CT & VT)

Output

Current Amps

1/8 0.8

1/4 1.5

1/2 3.0

1.0 5.0

3-Phase

Hp amp

1/8 0.8

1/4 1.5

1/2 3

1.0 5

2.0 8

3.0 11

5.0 17.5

7.5 24

10.0 33

1-Phase

Hp amp

——

1/4 1.5

1/2 2.5

3/4 4

1.0 5

2.0 7

——

1/2 1.6

1.0 2.6

2.0 4

3.0 6

5.0 9.5

7.5 12

10.0 17

1.0 1.7

2.0 2.7

3.0 4.0

5.0 6.1

7.5 9.0

10.0 12

IP20 Open Chassis

Model Number

Height

mm (in)

Dimensions

Width

Depth

mm (in)

1-Phase 100 – 115 VAC Input / 3-Phase 230 VAC Output

FR-E510W-0.1K-NA

FR-E510W-0.2K-NA

FR-E510W-0.4K-NA

FR-E510W-0.75K-NA

128 (5.0)

68 (2.7)

108 (4.3)

76 (3.0)

106 (4.2)

138 (5.5)

155 (6.1)

200 – 240 VAC Input / 3-Phase 200 – 240 VAC Output

Model Number

FR-E520-0.1K-NA

FR-E520-0.2K-NA

FR-E520-0.4K-NA

FR-E520-0.75K-NA

FR-E520-1.5K-NA

FR-E520-2.2K-NA

FR-E520-3.7K-NA

FR-E520-5.5K-NA

FR-E520-7.5K-NA

Height

mm (in)

128 (5.0)

260 (10.2)

Width

mm (in)

68 (2.7)

108 (4.3)

170 (6.7)

180 (7.1)

Depth

mm (in)

76 (3.0)

108 (4.3)

128 (5.0)

131 (5.2)

138 (5.5)

170 (6.7)

3-Phase 380 – 480 VAC Input / Output

FR-E540-0.4K-NA

FR-E540-0.75K-NA

FR-E540-1.5K-NA

FR-E540-2.2K-NA

150 (5.9)

140 (5.5)

FR-E540-3.7K-NA

FR-E540-5.5K-NA

FR-E540-7.5K-NA

150 (5.9)

140 (5.5)

220 (8.7)

3-Phase 575 – 600 VAC Input / Output

FR-E560-0.75K-NA

FR-E560-1.5K-NA

FR-E560-2.2K-NA

FR-E560-3.7K-NA

FR-E560-5.5K-NA

FR-E560-7.5K-NA

150 (5.9)

140 (5.5)

220 (8.7)

116 (4.6)

136 (5.4)

148 (5.8)

136 (5.4)

148 (5.8)

Weight

kg (lbs)

0.6 (1.4)

1.0 (2.2)

1.7 (3.8)

Weight

kg (lbs)

0.6 (1.4)

0.8 (1.8)

1.0 (2.2)

1.7 (3.8)

2.2 (4.9)

4.4 (9.7)

4.9 (10.8)

1.9 (4.2)

2.0 (4.4)

2.1 (4.7)

3.8 (8.4)

1.8 (4.0)

2.0 (4.7)

3.8 (8.4)

1/8 – 10 Hp

1/2 – 10 Hp

1 – 10 Hp

Stocked Item

–

Stocked Item

–

Mitsubishi Electric Automation | Variable Frequency Drives 9

E500 General Specifications

Control Method

Soft-PWM control / high carrier frequency PWM control can be selected. V / F control or

general-purpose magnetic flux vector control can be selected.

Output Frequency Range

Frequency Control

Analog Input

Digital Input

Frequency Precision

Analog Input

Digital Input

Voltage / Frequency Characteristics

Starting Torque

Torque Boost

Acceleration / Deceleration Time Setting

Braking Torque

Regenerative

DC Dynamic Brake

Stall Prevention Operation Level

www.DataSheet4U.com

Voltage Stall Prevention Operation Level

Fast-Response Current Limit Level

Frequency Setting

Signal

Analog Input

Digital Input

Starting Signal

Alarm Reset

Multi-Speed Selection

0.2 to 400Hz (starting frequency variable between 0 and 60Hz)

Across terminals 2-5: 1/500 of maximum set frequency (5 VDC input), 1/1000 (10 VDC, 4-20mADC input).

0.01Hz (less than 100Hz), 0.1Hz (100Hz or more) when digital setting is made using the control panel.

Within ±0.5% of maximum output frequency (25°C ±10°C) / 59°F to 95°F.

Within 0.01% of set output frequency when setting is made from control panel.

Base frequency set as required between 0 and 400Hz. Constant torque or variable torque pattern can be selected.

150% or more (at 1Hz), 200% or more (at 3Hz) when general-purpose magnetic flux vector control or

slip compensation is selected.

Manual torque boost, 0 to 30% may be set.

0.01, 0.1 to 3600 sec. (accel. and decel. can be set individually), linear or S-pattern accel./decel. mode can be selected

0.1K, 0.2K...150% or more, 0.4K, 0.75K... 00% or more, 1.5K...50% or more, 2.2K, 3.7K, 5.5K, 7.5K ... 20% or more (*1)

Operation frequency (0 to 120Hz), operation time (0 to 10 s), operation voltage (0 to 30%) variable.

Operation current level can be set (0 to 200% variable), presence or absence can be selected.

Operation level is fixed, presence or absence can be selected.

0 to 5 VDC, 0 to 10 VDC, 4 to 20mADC.

Entered from control panel (FR-PA02-02).

Forward and reverse rotation, start signal automatic self-holding input (3-wire input) can be selected.

Used to reset alarm output provided when protective function is activated.

Up to 15 speeds can be selected. (Each speed can be set between 0 and 400Hz, running speed can be

changed during operation from the control panel.)

Second Function Selection

Output Stop

Current Input Selection

Start Signal Automatic

Self-Holding Selection

External Thermal Relay Input

PU Operation-External Operation Switching

V/F-General-Purpose Magnetic

Flux Switching

Operation Functions

Operation Status

For Meter

Control Panel

Display

LED Display

Operating Status

Alarm Definition

Protective And Warning Functions

Ambient Temperature

Ambient Humidity

Storage Temperature (*3 )

Atmosphere

Altitude

Vibration

Used to select second functions (accel. time, decel. time, torque boost, freq., electronic overcurrent protection).

Instantaneous shut-off of inverter output (frequency, voltage).

Used to select input of frequency setting signal 4 to 20mADC (terminal 4).

Used to select start signal automatic self-holding input. (3-wire input)

Thermal relay contact input for use when the inverter is stopped by the external thermal relay.

Used to switch between PU operation and external operation from outside the inverter.

Used to switch between V/F control and general-purpose magnetic flux vector

from outside the inverter.

Maximum/minimum frequency setting, frequency jump operation, external thermal relay input selection,

automatic restart operation after instantaneous power failure, forward/reverse rotation prevention, slip

comp., operation mode selection, off-line auto tuning function, PID control, computer link operation (RS-485).

2 open collector output signals can be selected from inverter running, up to frequency, frequency

detection, overload alarm, zero current detection, output current detection, PID upper limit, PID lower limit,

PID forward/reverse rotation, operation ready, minor fault and alarm, and 1 contact output (230 VAC 0.3A,

30 VDC 0.3A) can be selected.

1 signal can be selected from output frequency, motor current and output voltage.

Pulse train output (1440 pulses/second/full scale).

Output voltage, output current, set frequency, running.

Alarm definition is displayed when protective function is activated. 4 alarm definitions are stored.

Power application (POWER)

Overcurrent shut-off (during acceleration, deceleration, constant speed), regenerative overvoltage shut-off,

undervoltage (*2) , instantaneous power failure (*2), overload shut-off (electronic overcurrent protection),

brake transistor alarm, output short circuit, stall prevention, brake resistor overheat protection, fan overheat,

fan failure (*4), parameter error, PU disconnection, ground fault protection.

Constant torque: -10°C to +50°C (non-freezing) 14°F to 122°F

90%RH or less (non-condensing)

-20°C to +65°C / -4°F to 149°F

Indoors, no corrosive and flammable gases, oil mist, dust and dirt.

Maximum 1000m (3300 ft.) above sea level for standard operation. After that derate by 3% for every extra

500m up to 2500m (91%).

5.9 m/s2 (0.6G max.) based on JIS C 0911.

Notes:

1. The braking torque indicated is a short-duration average torque (which varies with motor loss) when the motor alone is decelerated from 60Hz in the shortest time and is not a continuous regenerative torque. When the motor

is decelerated from the frequency higher than the base frequency, the average deceleration torque will reduce. Since the inverter does not contain a brake resistor, use the optional brake resistor when regenerative energy is

large. (The optional brake resistor cannot be used with 0.1K and 0.2K.) A brake unit (BU) may also be used.

2. When undervoltage or instantaneous power failure has occurred, alarm display or alarm output is not provided but the inverter itself is protected. Overcurrent, regenerative overvoltage or other protection may be activated at

power restoration according to the operating status (load size, etc.).

3. Temperature applicable for a short period in transit, etc.

4. Not provided for the FR-E520-0.1K to 0.4K and FR-E510W-0.1K to 0.75K which are not equipped with a cooling fan.

PDF 파일 내의 페이지 : 총 6 페이지

제조업체: Mitsubishi

( mitsubishi )

FR-E520-xxK-NA data

데이터시트 다운로드 :

[ FR-E520-xxK-NA.PDF ]

[ FR-E520-xxK-NA 다른 제조사 검색 ]

국내 전력반도체 판매점

상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743

일반적인 전자부품 판매점

디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14

FR-E520-xxK-NA 반도체 회로 부품 판매점

Variable Frequency Drives

국내 전력반도체 판매점

일반적인 전자부품 판매점

관련 데이터시트