|
|
Número de pieza | W681360 | |
Descripción | 3V SINGLE-CHANNEL 13-BIT LINEAR VOICE-BAND CODEC | |
Fabricantes | Winbond | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de W681360 (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! W681360
www.DataSheet4U.com
3V SINGLE-CHANNEL 13-BIT LINEAR VOICE-BAND CODEC
Data Sheet
Publication Release Date: September 2005
- 1 - Revision A.2
1 page W681360
13. ORDERING INFORMATION........................................................................................................... 32
14. VERSION HISTORY ....................................................................................................................... 33
www.DataSheet4U.com
Publication Release Date: September 2005
- 5 - Revision A.2
5 Page W681360
7.2.1. Receive Gain Adjust Mode
The W681360 can be put in the receive path adjust mode by applying a logic “1” to the BCLKR pin
while all other clocks are clocked normally. The device is then in a position to read 16-bits of data,
with three additional coefficient bits an addend to the 13-bit digital voice data. These three coefficients
are used to program a receive path attenuation, thereby allowing the receive signal to be attenuated
according to the values in the following table. If the feature is not used the default value is 0dB.
TABLE 7.2: ATTENUATION COEFFICIENT RELATIONSHIP IN RECEIVE GAIN ADJUST MODE
www.DataSheet4U.com
Coefficient
000
001
010
011
100
101
110
111
Attenuation (dB)
0
3
6
9
12
15
18
21
7.3. POWER MANAGEMENT
7.3.1. Analog and Digital Supply
The power supply for the analog and digital parts of the W681360 must be 2.7V to 5.25V. This supply
voltage is connected to the VDD pin. The VDD pin needs to be decoupled to ground through a 0.1 μF
ceramic capacitor.
7.3.2. Analog Ground Reference Bypass
The system has an internal precision voltage reference which generates the VDD/2 mid-supply analog
ground voltage. This voltage needs to be decoupled to VSS at the VREF pin through a 0.1 μF ceramic
capacitor.
7.3.3. Analog Ground Reference Voltage Output
The analog ground reference voltage is available for external reference at the VAG pin. This voltage
needs to be decoupled to VSS through a 0.01 μF ceramic capacitor. The analog ground reference
voltage is generated from the voltage on the VREF pin and is also used for the internal signal
processing.
- 11 -
Publication Release Date: September 2005
Revision A.2
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet W681360.PDF ] |
Número de pieza | Descripción | Fabricantes |
W681360 | 3V SINGLE-CHANNEL 13-BIT LINEAR VOICE-BAND CODEC | Winbond |
W681360 | 3V SINGLE-CHANNEL 13-BIT LINEAR VOICE-BAND CODEC | Nuvoton Technology |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |