|
|
Número de pieza | BR-HUB33-05V-TRB | |
Descripción | LED | |
Fabricantes | BRIGHT LED ELECTRONICS | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BR-HUB33-05V-TRB (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HY033-05V-TRB
● Features:
1. Emitted Color: Super Red.
2. Lens Appearance : Water Clear
3. Mono-color type.
4. 3.2x1.6x1.1mm(1206)standard package
5. Suitable for all SMT assembly methods.
6. Compatible with infrared and vapor phase
www.DataSheet4U.com
reflow solder process.
7. Compatible with automatic placement
equipment.
8. For DC and pulse operationWith current
9. limiting resistor for 05V TTL & CMOS
compatible.
10. This product doesn’t contain restriction
Substance, comply ROHS standard.
● Applications:
1. Automotive : Dashboards, stop lamps,
turn signals.
2. Backlighting : LCDs, Key pads advertising.
3. Status indicators : Comsumer & industrial
electronics.
4. General use.
●Package Dimensions:
NOTES:
1.All dimensions are in millimeters (inches).
2.Tolerance is ± 0.10mm (0.004”) unless otherwise specified.
3.Specifications are subject to change without notice.
● Absolute Maximum Ratings(Ta=25℃)
Parameter
Symbol
Operating Voltage MXA
VF
Operating Temperature
Topr
Storage Temperature
Tstg
Soldering Temperature
Tsol
*1 Condition for IFp is pulse of 1/10 duty and 0.1msec width.
Rating
5
-25℃~80℃
-30℃~85℃
See Page 5
Unit
V
-
-
-
Ver.2.0 Page 1 of 6
1 page BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HY033-05V-TRB
● Soldering :
1. Manual Of Soldering
The temperature of the iron tip should not be higher than 300℃(572℉) and Soldering within 3
seconds per solder-land is to be observed.
2. Reflow Soldering
Preheating : 140℃~160℃±5℃,within 2 minutes.
Operation heating : 260℃(Max.) within 10 seconds.(Max)
Gradual Cooling (Avoid quenching).
www.DataSheet4U.com
140~160℃
10 SEC. MAX.
260℃ MAX.
4℃ /SEC. MAX.
4℃ /SEC. MAX.
OVER 2 MIN.
Time
3. DIP soldering (Wave Soldering) :
Preheating : 120℃~150℃,within 120~180 sec.
Operation heating : 245℃±5℃ within 5 sec.260℃ (Max)
Gradual Cooling (Avoid quenching).
Soldering heat Max. 260 ℃
120~150℃
245 ±5℃ within 5 sec.
Preheat
120~180 sec.
● Handling :
Time
Care must be taken not to cause to the epoxy resin portion of BRIGHT LEDs while it is exposed to
high temperature.
Care must be taken not rub the epoxy resin portion of BRIGHT LEDs with hard or sharp article such
as the sand blast and the metal hook.
Ver.2.0 Page 5 of 6
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet BR-HUB33-05V-TRB.PDF ] |
Número de pieza | Descripción | Fabricantes |
BR-HUB33-05V-TRB | LED | BRIGHT LED ELECTRONICS |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |