|
EPCOS |
Surge Arrester
2-Electrode-Arrester
A60-A230X
Ordering code: B88069X2390C403
DC spark-over voltage 1) 2)
Impulse spark-over voltage
at 100 V/µs - for 99 % of measured values
- typical values of distribution
at 1 kV/µs - for 99 % of measured values
- typical values of distribution
Nominal impulse discharge current (wave 8/20 µs)
Single impulse discharge current (wave 8/20 µs)
Nominal alternating discharge current (50 Hz, 1 s)
Alternating discharge current (50 Hz, 9 cycles)
Insulation resistance at 100 Vdc
Capacitance at 1 MHz
Arc voltage at 1 A
Glow to arc transition current
Glow voltage
Weight
Operation and storage temperature
Climatic category (IEC 60068-1)
Marking, red
1) At delivery AQL 0.65 level II, DIN ISO 2859
2) In ionized mode
Terms in accordance with ITU-T Rec. K12 and DIN 57845/VDE0845
230
± 20
V
%
< 500
< 450
< 800
< 700
10
12
10
> 40
> 10
< 1.5
< 20
< 0.5
~ 60
~ 1.5
-40 ... +90
40/ 90/ 21
230 YY O
230 - Nominal voltage
YY - Year of production
O - Non radioactive
V
V
V
V
kA
kA
A
A
GΩ
pF
V
A
V
g
°C
AB E / AB PM
Page 1 of 2
Issue 03, 04.04.2002
Surge Arrester
2-Electrode-Arrester
A60-A230X
Ordering code: B88069X2390C403
Not to scale
Dimensions in mm
Non controlled document
© EPCOS AG 2002. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and
Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless
otherwise agreed.
AB E / AB PM
Issue 03, 04.04.2002
Page 2 of 2
|