|
Mitsubishi Electric |
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MITSUBISHI RF MOSFET MODULE
RA13H4452M
440-520MHz 13W 12.5V MOBILE RADIO
DESCRIPTION
The RA13H4452M is a 13-watt RF MOSFET Amplifier Module
for 12.5-volt mobile radios that operate in the 440- to 520-MHz
range.
The battery can be connected directly to the drain of the
enhancement-mode MOSFET transistors. Without the gate
voltage (VGG=0V), only a small leakage current flows into the drain
and the RF input signal attenuates up to 60 dB. The output power
and drain current increase as the gate voltage increases. With a
gate voltage around 4V (minimum), output power and drain current
increases substantially. The nominal output power becomes
available at 4.5V (typical) and 5V (maximum). At VGG=5V, the
typical gate current is 1 mA.
This module is designed for non-linear FM modulation, but may
also be used for linear modulation by setting the drain quiescent
current with the gate voltage and controlling the output power with
the input power.
FEATURES
• Enhancement-Mode MOSFET Transistors
(IDD≅0 @ VDD=12.5V, VGG=0V)
• Pout>13W, ηT>40% @ VDD=12.5V, VGG=5V, Pin=50mW
• Broadband Frequency Range: 440-520MHz
• Low-Power
www.DataSheet4U.com
Control
Current
IGG=1mA
(typ)
at
VGG=5V
• Module Size: 66 x 21 x 9.88 mm
• Linear operation is possible by setting the quiescent drain current
with the gate voltage and controlling the output power with the
input power
BLOCK DIAGRAM
2
3
14
5
1 RF Input (Pin)
2 Gate Voltage (VGG), Power Control
3 Drain Voltage (VDD), Battery
4 RF Output (Pout)
5 RF Ground (Case)
ORDERING INFORMATION:
ORDER NUMBER
RA13H4452M-E01
RA13H4452M-01
(Japan - packed without desiccator)
SUPPLY FORM
Antistatic tray,
10 modules/tray
RA 13H4452M
MITSUBISHI ELECTRIC
1/9
23 Dec 2002
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
MAXIMUM RATINGS (Tcase=+25°C, unless otherwise specified)
SYMBOL PARAMETER
CONDITIONS
VDD Drain Voltage
VGG<5V
VGG Gate Voltage
VDD<12.5V, Pin=0mW
Pin Input Power
Pout Output Power
f=440-520MHz,
ZG=ZL=50Ω
Tcase(OP) Operation Case Temperature Range
Tstg Storage Temperature Range
The above parameters are independently guaranteed.
MITSUBISHI RF POWER MODULE
RA13H4452M
RATING
17
6
100
20
-30 to +110
-40 to +110
UNIT
V
V
mW
W
°C
°C
ELECTRICAL CHARACTERISTICS (Tcase=+25°C, ZG=ZL=50Ω, unless otherwise specified)
SYMBOL PARAMETER
CONDITIONS
MIN TYP MAX
f Frequency Range
440 520
Pout Output Power
ηT Total Efficiency
2fo 2nd Harmonic
ρin Input VSWR
VDD=12.5 V
VGG=5V
Pin=50mW
IGG Gate Current
— Stability
VDD=10.0-15.2V, Pin=25-70mW,
Pout<20W (VGG control), Load VSWR=3:1
— Load VSWR Tolerance VDD=15.2V, Pin=50mW, Pout=13W (VGG control),
Load VSWR=20:1
13
40
-30
3:1
1
No parasitic oscillation
No degradation or
destroy
UNIT
MHz
W
%
dBc
—
mA
—
—
All parameters, conditions, ratings, and limits are subject to change without notice.
RA 13H4452M
MITSUBISHI ELECTRIC
2/9
23 Dec 2002
|