|
|
Número de pieza | XU1003 | |
Descripción | GaAs MMIC Transmitter | |
Fabricantes | Mimix Broadband | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de XU1003 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
No Preview Available ! 19.0-26.0 GHz GaAs MMIC
Transmitter
June 2005 - Rev 21-Jun-05
Features
Sub-harmonic Transmitter
Integrated IR Mixer, LO Buffer & Output Amplifier
2.0 dBm LO Drive Level
15.0 dB Image Rejection, 10.0 dB Conversion Gain
100% On-Wafer RF and DC Testing
100% Visual Inspection to MIL-STD-883 Method 2010
Chip Device Layout
U1003
General Description
Mimix Broadband’s 19.0-26.0 GHz GaAs MMIC transmitter has a
+20.0 dBm output third order intercept and 15.0 dB image
rejection across the band.This device is an image reject sub-
harmonic anti-parallel diode mixer followed by a balanced two
stage output amplifier and includes an integrated LO buffer
amplifier.The image reject mixer reduces the need for
unwanted sideband filtering before the power amplifier.The
use of a sub-harmonic mixer makes the provision of the LO
easier than for fundamental mixers at these frequencies. I and Q
mixer inputs are provided and an external 90 degree hybrid is
required to select the desired sideband.This MMIC uses Mimix
Broadband’s 0.15 µm GaAs PHEMT device model technology,
and is based upon electron beam lithography to ensure high
repeatability and uniformity.The chip has surface passivation to
protect and provide a rugged part with backside via holes and
gold metallization to allow either a conductive epoxy or
eutectic solder die attach process.This device is well suited for
Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT
applications.
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id1,Id2)
Gate Bias Voltage (Vg)
Input Power (IF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+5.0 VDC
320, 165 mA
+0.5 VDC
0.0 dBm
-65 to +165 OC
-55 to MTTF Table1
MTTF Table1
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
GHz 19.0 - 26.0
Frequency Range (RF) Lower Side Band
GHz 19.0 - 26.0
Frequency Range (LO)
GHz 8.0
- 14.5
Frequency Range (IF)
GHz DC - 3.0
Output Return Loss RF (S22)
dB - 14.0 -
Small Signal Conversion Gain IF/RF (S21)
dB - 10.0 -
LO Input Drive (PLO)
dBm - +2.0 -
Image Rejection
dBc - 15.0 -
Isolation 2xLO to RF
dB - -12.0 -
Output Third Order Intercept (OIP3)
dBm - TBD -
Drain Bias Voltage (Vd1)
VDC - +4.0 +4.5
Drain Bias Voltage (Vd2)
VDC - +4.0 +4.5
Gate Bias Voltage (Vg1,2)
VDC -1.2 -0.1 +0.3
Supply Current (Id1) (Vd1=4.0V, Vg=-0.1V Typical)
mA - 230 280
Supply Current (Id2) (Vd2=4.0V, Vg=-0.1V Typical)
mA - 116 140
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1 page 19.0-26.0 GHz GaAs MMIC
Transmitter
June 2005 - Rev 21-Jun-05
App Note [3] USB/LSB Selection -
LSB USB
IF2 IF1
An alternate method of Selection of USB or LSB:
USB
U1003
For Upper Side Band operation (USB):
With IF1 and IF2 connected to the
direct port (0º) and coupled port (90º)
respectively as shown in the diagram,
the USB signal will reside on the
isolated port. The input port must be
loaded with 50 ohms.
For Lower Side Band operation (LSB):
With IF1 and IF2 connected to the
direct port (0º) and coupled port (90º)
respectively as shown in the diagram,
the LSB signal will reside on the input
port. The isolated port must be loaded
with 50 ohms.
LSB
In Phase Combiner
o
-90
IF2 IF1
In Phase Combiner
o
-90
IF2 IF1
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 7
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5 Page |
Páginas | Total 7 Páginas | |
PDF Descargar | [ Datasheet XU1003.PDF ] |
Número de pieza | Descripción | Fabricantes |
XU1000 | GaAs MMIC Transmitter | Mimix Broadband |
XU1001 | GaAs MMIC Transmitter | Mimix Broadband |
XU1002 | GaAs MMIC Transmitter | Mimix Broadband |
XU1002-QD | GaAs Transmitter | Mimix Broadband |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |