|
|
PDF XM1000 Data sheet ( Hoja de datos )
| Número de pieza | XM1000 | |
| Descripción | GaAs MMIC Balanced Mixer | |
| Fabricantes | Mimix Broadband | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de XM1000 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
32.0-46.0 GHz GaAs MMIC
Balanced Mixer
November 2005 - Rev 21-Nov-05
Features
Fundamental Balanced Mixer
7.0 dB Conversion Loss
+24 dBm Input Third Order Intercept
100% On-Wafer RF Testing
100% Visual Inspection to MIL-STD-883
Method 2010
Chip Device Layout
M1000
General Description
Mimix Broadband’s 32.0-46.0 GHz GaAs MMIC
fundamental balanced mixer has been optimized for use
as a down-converter.The device has a conversion loss of
7.0 dB with a +24.0 dBm input third order intercept point.
This MMIC uses Mimix Broadband’s 0.15 µm GaAs PHEMT
device model technology, and is based upon electron
beam lithography to ensure high repeatability and
uniformity.The chip has surface passivation to protect
and provide a rugged part with backside via holes and
gold metallization to allow either a conductive epoxy or
www.DataSheet4U.com eutectic solder die attach process. This device is well
suited for Millimeter-wave Point-to-Point Radio, LMDS,
SATCOM and VSAT applications.
Absolute Maximum Ratings
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
+0.3 VDC
+20.0 dBm
-65 to +165 OC
-55 to +125 OC
o
Electrical Characteristics (Ambient Temperature T = 25 C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Sideband
GHz 32.0 - 46.0
Frequency Range (RF) Lower Sideband
GHZ 33.0 - 44.0
Frequency Range (LO)
GHz 29.0 - 47.0
Frequency Range (IF)
GHz DC - 3.0
RF Return Loss (S11)
dB - 15.0 -
IF Return Loss (S22)
dB - 10.0 -
LO Return Loss (S33)
dB - 20.0 -
Conversion Loss (S21)
dB - 7.0 -
LO Input Drive (PLO)
dBm - +15.0 -
Isolation LO/RF
dB - TBD -
Isolation LO/IF
dB - TBD -
Isolation RF/IF
dB - TBD -
Input Third Order Intercept (IIP3)
dBm - +24.0 -
Gate Bias Voltage (Vg1)
VDC -2.0 -0.6 +0.1
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
1 page  
32.0-46.0 GHz GaAs MMIC
Balanced Mixer
November 2005 - Rev 21-Nov-05
Mechanical Drawing
0.386
(0.015)
1.300
(0.051)
2
0.993
(0.039)
1
0.785 0.983
(0.031) (0.039)
34
5
0.993
(0.039)
M1000
6
0.0
0.0
0.536
(0.021)
1.300
(0.051)
(Note: Engineering designator is 40BRFM0058)
Units: millimeters (inches) Bond pad dimensions are shown to center of bond pad.
Thickness: 0.110 +/- 0.010 (0.0043 +/- 0.0004), Backside is ground, Bond Pad/Backside Metallization: Gold
All DC Bond Pads are 0.100 x 0.100 (0.004 x 0.004). All RF Bond Pads are 0.100 x 0.200 (0.004 x 0.008)
Bond pad centers are approximately 0.109 (0.004) from the edge of the chip.
Dicing tolerance: +/- 0.005 (+/- 0.0002). Approximate weight: 1.048 mg.
Bond Pad #1 (LO)
Bond Pad #2 (Vg1)
Bond Pad #3 (Vg2) Bond Pad #5 (RF)
Bond Pad #4 (Vd) Bond Pad #6 (IF)
Bias Arrangement
Vg1
Vg2 [1]
Vd[1]
LO 1
2
34
5 RF
App Note [1] Biasing - As shown in the bonding
diagram, the pHEMT mixer devices are operated using a
separate gate voltage Vg1. Set Vg1=-0.6V for optimum
conversion loss performance. pHEMT test device (Vd,Vg2)
with 100 Ohm resistor is provided so that mixer gate bias
can be corrected for local Vto.
App Note [2] Bias Arrangement - Each DC pad (Vg1)
needs to have DC bypass capacitance (~100-200 pF) as
close to the device as possible. Additional DC bypass
capacitance (~0.01 uF) is also recommended.
6
IF
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 6
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet XM1000.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| XM1000 | GaAs MMIC Balanced Mixer | Mimix Broadband |
| XM1001 | GaAs MMIC Image Reject Mixer | Mimix Broadband |
| XM1001-BD | Image Reject Mixer |  MA-COM |
| XM1001-QH | GaAs MMIC Image Reject Mixer | Mimix Broadband |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |