|
|
PDF 587Bxxx Data sheet ( Hoja de datos )
| Número de pieza | 587Bxxx | |
| Descripción | 120V AC POWER LINE SURGE SUPPRESSOR | |
| Fabricantes | Protek Devices | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 587Bxxx (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
Only One Name Means ProTek’Tion™
587B051
thru
587B301
120V AC POWER LINE SURGE SUPPRESSOR
APPLICATIONS
✔ Hard Wired Equipment AC Power Protection
✔ Load Side Distribution Systems
✔ Secondary Protection for Light Industrial AC Power
IEC COMPATIBILITY (EN61000-4)
✔ 61000-4-5 (Surge): 1kA, 8/20µs - Level 4(Line-Line) & 333A Level 4(Line-Ground)
FEATURES
✔ Meets ANSI/IEEE C62.41 Requirements
✔ Listed to CSA, File LR65240
✔ Differential and Common Mode Protection
✔ Low Clamping Voltage
✔ Nanosecond Response Time
✔ Long Life and Maintenance Free
MECHANICAL CHARACTERISTICS
✔ Plastic Package
✔ Weight: 485 Grams (Approximate)
✔ Flammability Rating UL 94V-0
✔ Device Marking: Part Number, Date Code, Logo, Voltage and Current Rating
DESCRIPTION
The 587B Series of 120 Volt AC Surge Suppressors is designed for use by the OEM,
equipment installer and or maintenance contractor. These modules employ a three
stage technology proven to be the most cost effective and reliable method in protect-
ing sensitive electronic equipment from over voltage transients.
This series is designed to protect AC powered equipment from the 6,000 Volt peak
open circuit voltage and 3,000 Amp short circuit current as defined in ANSI/IEEE
C62.41, Category C1.
The 587B Series offers a high degree of protection against 120 VAC EMI line noise. It
is ideal for protecting 400 Volt components because the solid state TVS technology
assures that the line-to-neutral voltage will not exceed 400 Volts. While the modules
are designed for transient voltage protection, the advanced circuitry will also attenuate
the amplitude and slow the rate of rise of high frequency noise acting as an EMI filter.
The 587B Series includes differential mode and common mode protection, which is
effective in reducing interference from line to equipment and are effective in reducing
equipment generated noise to meet FCC, VDE and CSA interference requirements.
U.S PATENT 4,563,720
FIGURE 1
TRANSIENT VOLTAGE THREAT
CONDITION
8
6
4
2
0
0 10 20 30 40 50 60
Time - µs
FIGURE 2
TYPICAL CLAMPING ACTION
OF A 16 AMP MODULE
6
4
2
0
0 10 20 30 40 50 60
Time - µs
Figures 1 and 2 are photographs of digitized waveforms
showing the typical clamping action of a 16 ampere module.
A 12 Ohm resistor is used to represent a 10 Amp equipment
load. The load is then subjected to the ANSI/IEEE C62.41
Category CI test conditions (6,000V/3,000A). These photo-
graphs contrast the effect on equipment with and without the
protector.
05016.R4 12/03
1 www.protekdevices.com
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet 587Bxxx.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 587Bxxx | 120V AC POWER LINE SURGE SUPPRESSOR | Protek Devices |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |