5B32 반도체 회로 부품 판매점

Single-Channel Signal Conditioning Module



Analog Devices 로고
Analog Devices
5B32 데이터시트, 핀배열, 회로
www.DataSheet4U.com
Single-Channel Signal Conditioning Module
FEATURES
Isolated Current Input.
Amplifies, Protects, Filters, and Isolates Analog Input.
Measure process-current input signal of 4-20 mA or 0-20 mA
by reading the voltage across an external precision 20
resistor (supplied).
Generates an output of 0 to +5V.
Extra Current Conversion resistors are available.
Module circuitry can withstand 240v rms at the input screw-
terminals.
All 5B32 series modules are mix-and-match and Hot
Swappable.
APPLICATIONS
Industrial signal conditioning
Industrial signal isolation
Industrial signal filtering
PRODUCT OVERVIEW
The 5B Series represents an innovative generation of low cost,
high performance plug-in signal conditioners. Designed for
industrial applications, these modules incorporate highly
reliable transformer-based isolation and automated surface-
mount manufacturing technology. They are compact,
economical components whose performance exceeds that
available from more expensive devices. Combining 1500 V rms
continuous isolation, +0.05% calibrated accuracy, small size and
low cost, the 5B Series is an attractive alternative to expensive
signal conditioners and in-house designs
All modules are potted and identical in pin-out and size (2.27” x
2.32” x 0.595”). They can be mixed and matched, permitting
users to address their exact needs, and may be “hot swapped
without disturbing field wiring or power. The isolated input
modules provide 0 to +5V or +5V outputs and accept J, K, T, E,
R, S, N, or B type thermocouples.
These modules feature complete signal conditioning functions
including 240 V rms input protection, filtering, chopper
stabilized low drift +1 uV/oC amplification, 1500 V rms
isolation, and sensor excitation when required.
All modules feature excellent common mode rejection and
meet industrial transient surge withstand specifications.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
5B32
FUNCTIONAL BLOCK DIAGRAM
Figure 1. 5B32 Functional Block Diagram
There are also a number of backplanes and mounting sockets
which provide a complete signal conditioning solution for end
users. Each backplane incorporates screw terminals for field
wiring inputs and outputs and cold junction sensors for
thermocouple applications.
These signal conditioners are designed to provide an easy and
convenient solution to signal conditioning problems of both
designers and end users in measurement and control
applications. Typical uses include microcomputer-based
measurement systems, standard data acquisition systems,
programmable controllers, analog recorders and dedicated
control systems. The 5 B series modules are ideally suited to
applications where monitoring and control of temperature,
pressure, flow, rotation and other analog signals are required.
The 5B Series modules and backplanes are approved by Factory
Mutual (FM) and the 5B Series modules are approved by the
Canadian Standards Association (CSA) for use in Class 1,
Division 2, Groups A, B, C, and D locations. These approvals
certify that the 5B Series is suitable for use in locations where a
hazardous concentration of flammable gas may exist only under
fault conditions of operation. Equipment of this category is
called “nonincendive” and they need no special enclosures or
other physical safeguards.
The 5B series modules and backplanes have been tested and
passed the stringent heavy industrial requirements of the
European Union’s electromagnetic compatibility (ENC)
directive – EN50082-1 and EN50081-2. When used according
to installation directions (refer to 5B series User Manual), any
errors caused by EMI/RFI interference will be less than 0.1% of
the full scale 5B measurement range for field strengths up to 10
V/M and frequencies up to 1 GHz.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved.

5B32 데이터시트, 핀배열, 회로
GENERAL DESCRIPTION
The 5B32 is a single-channel signal conditioning module that
amplifies, protects, filters and isolates its analog input. The
module measures a process current input signal of 4-20 mA or
0-20 mA by reading the voltage across an external precision
20W resistor (supplied) and generating an output of 0 to +5 V.
Extra current conversion resistor are available as accessories
(See Model AC1362 in the Accessories section).
Note that the 5B32 module circuitry can withstand 240 V rms at
the input screw-terminals, thereby shielding computer-side
circuitry from field-side overvoltage conditions. In addition, all
5B32 Series modules are mix-and-match and hot swappable, so
can be inserted or removed from any socket in the same
backplane without powering down the system.
A chopper-stabilized input amplifier provides low drift and
stable gain. At the amplifier input, a stable, laser-trimmed zero-
scale input offset is subtracted from the input signal to set the
.
5B32
zero-scale value for the 4-20 mA range. For user convenience,
the zero can be optionally factory-set to meet custom needs,
This allows suppression of a zero-scale input value many times
larger than the total span for precise expanded-scale
measurements.
Internal multi-pole lowpass filtering with a four-Hz cutoff (-
3dB) enhances normal-mode (noise on signal) and common-
mode (noise on signal return) rejection at 50/60 Hz, enabling
accurate measurement of small signals in high electrical noise.
A series output switch eliminates the need for external
multiplexing in many applications. The switch is turned on by
an active-low enable input. If the switch is to be on at all times,
the enable-input should be grounded to power common as it is
on the 5B01 and 5B08 backplanes..
.
Figure 2
Rev. 0 | Page 2 of 8




PDF 파일 내의 페이지 : 총 8 페이지

제조업체 : Analog Devices ( analogs )

5B32 data

데이터시트 다운로드
:

[ 5B32.PDF ]

[ 5B32 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743


일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


추천 데이터시트


5B30

(5B30 / 5B31) Millivolt and Voltage Input - Analog Devices



5B31

(5B30 / 5B31) Millivolt and Voltage Input - Analog Devices



5B32

Single-Channel Signal Conditioning Module - Analog Devices



5B34

Isolated Linearized RTD Input - Analog Devices



5B35

ISOLATED LINEARIZED 4-WIRE RDT INPUT - Analog Devices



5B36

Isolated / Potentiometer Input - Analog Devices



5B37

Isolated Thermocouple Input - Analog Devices



5B38

Wide-Bandwidth Strain Gage Input - Analog Devices



5B39

Isolated Current Output - Analog Devices