|
|
PDF GX680 Data sheet ( Hoja de datos )
| Número de pieza | GX680 | |
| Descripción | Stitching Back Adapter | |
| Fabricantes | Fuji | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de GX680 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
Fuji G.cXom680 Stitching Back AdapterPlease read these instructions before using this adapter.
t4UThe Kapture Group Fuji GX 680 Stitching Adapter enables the
estitching of 2 images in landscape or portrait orientation. A
hecenter detent for single image capture is also provided.
www.DataS U.comStabilizing bar
When stitching, you must
first pull the detent
release knob. After the
sliding plate starts to move
you may release it. It will
automatically drop into the
selected detent. Make your
first capture and then
pull the release knob
again and slide the adapter
plate to the opposite side
until it locks in place.
t4The overlap selector rotates 180 degrees with red dots
eon one side and white dots on the other. These dots
correspond with the red or white dots on the adapter
eplate. If you are using a 4x4 or 5x4 chip select the red
hdot. When using a 2x3 chip select the white dot for
portrait shots and the red dot for landscape imaging.
www.DataS omLandscape stitching
Center lock
Mounting the Fuji stitching adapter
The stabilizing bar must be retracted
before attaching or rotating this adapter.
Simply pull both ends of the stabilizing bar
back fully. Next, align the rotating back as
shown in the photo above. Rotate the
stitching adapter to the desired orientation.
Push both ends of the stabilizing bar
toward the Fuji camera body until it is
snug. When the detent release knob is at
the 12 o’clock position you are in the
landscape mode. Rotating the adapter
plate another 90 degrees clockwise puts
you in the portrait mode.
U.cKapture Group Inc.
t45470 Pebble Lane
eOsage Beach, MO 65065
.DataShePortrait stitching
www© Copyright 2004 - Kapture Group, Inc - All rights reserved
800 879 4955
573 302 1969
573 302 1415 fax
www.kapturegroup.com
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet GX680.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| GX680 | Stitching Back Adapter | Fuji |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |