파트넘버.co.kr 74HC192 데이터시트 PDF


74HC192 반도체 회로 부품 판매점

Presettable synchronous BCD decade up/down counter



Philips 로고
Philips
74HC192 데이터시트, 핀배열, 회로
INTEGRATED CIRCUITS
DATA SHEET
For a complete data sheet, please also download:
The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
74HC/HCT192
Presettable synchronous BCD
decade up/down counter
Product specification
File under Integrated Circuits, IC06
December 1990


74HC192 데이터시트, 핀배열, 회로
Philips Semiconductors
Presettable synchronous BCD decade
up/down counter
Product specification
74HC/HCT192
FEATURES
Synchronous reversible counting
Asynchronous parallel load
Asynchronous reset
Expandable without external logic
Output capability: standard
ICC category: MSI
GENERAL DESCRIPTION
The 74HC/HCT192 are high-speed Si-gate CMOS devices
and are pin compatible with low power Schottky TTL
(LSTTL). They are specified in compliance with JEDEC
standard no. 7A.
The 74HC/HCT192 are synchronous BCD up/down
counters. Separate up/down clocks, CPU and CPD
respectively, simplify operation. The outputs change state
synchronously with the LOW-to-HIGH transition of either
clock input. If the CPU clock is pulsed while CPD is held
HIGH, the device will count up. If the CPD clock is pulsed
while CPU is held HIGH, the device will count down. Only
one clock input can be held HIGH at any time, or
erroneous operation will result. The device can be cleared
at any time by the asynchronous master reset input (MR);
it may also be loaded in parallel by activating the
asynchronous parallel load input (PL).
The “192” contains four master-slave JK flip-flops with the
necessary steering logic to provide the asynchronous
reset, load, and synchronous count up and count down
functions.
Each flip-flop contains JK feedback from slave to master,
such that a LOW-to-HIGH transition on the CPD input will
decrease the count by one, while a similar transition on the
CPU input will advance the count by one.
One clock should be held HIGH while counting with the
other, otherwise the circuit will either count by two’s or not
at all, depending on the state of the first flip-flop, which
cannot toggle as long as either clock input is LOW.
Applications requiring reversible operation must make the
reversing decision while the activating clock is HIGH to
avoid erroneous counts.
The terminal count up (TCU) and terminal count down
(TCD) outputs are normally HIGH. When the circuit has
reached the maximum count state of 9, the next
HIGH-to-LOW transition of CPU will cause TCU to go LOW.
TCU will stay LOW until CPU goes HIGH again, duplicating
the count up clock.
Likewise, the TCD output will go LOW when the circuit is in
the zero state and the CPD goes LOW. The terminal count
outputs can be used as the clock input signals to the next
higher order circuit in a multistage counter, since they
duplicate the clock waveforms. Multistage counters will not
be fully synchronous, since there is a slight delay time
difference added for each stage that is added.
The counter may be preset by the asynchronous parallel
load capability of the circuit. Information present on the
parallel data inputs (D0 to D3) is loaded into the counter
and appears on the outputs (Q0 to Q3) regardless of the
conditions of the clock inputs when the parallel load (PL)
input is LOW. A HIGH level on the master reset (MR) input
will disable the parallel load gates, override both clock
inputs and set all outputs (Q0 to Q3) LOW. If one of the
clock inputs is LOW during and after a reset or load
operation, the next LOW-to-HIGH transition of that clock
will be interpreted as a legitimate signal and will be
counted.
December 1990
2




PDF 파일 내의 페이지 : 총 13 페이지

제조업체: Philips

( philips )

74HC192 data

데이터시트 다운로드
:

[ 74HC192.PDF ]

[ 74HC192 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


74HC190

Synchronous Decade Up/Down Counters - National Semiconductor



74HC190

4 BIT SYNCHRONOUS UP/DOWN COUNTERS - SGS-THOMSON



74HC190

Presettable synchronous BCD decade up/down counter - Philips



74HC191

Synchronous Binary Up/Down Counters - National Semiconductor



74HC191

4 BIT SYNCHRONOUS UP/DOWN COUNTERS - SGS-THOMSON



74HC191

Presettable synchronous 4-bit binary up/down counter - Philips



74HC192

Presettable synchronous BCD decade up/down counter - Philips



74HC193

Presettable synchronous 4-bit binary up/down counter - NXP Semiconductors



74HC193

Presettable synchronous 4-bit binary up/down counter - Philips