|
|
PDF 74VHC574T Data sheet ( Hoja de datos )
| Número de pieza | 74VHC574T | |
| Descripción | OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING | |
| Fabricantes | STMicroelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de 74VHC574T (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
® 74VHC574
OCTAL D-TYPE FLIP FLOP
WITH 3 STATE OUTPUT NON INVERTING
s HIGH SPEED:
fMAX = 180 MHz (TYP.) at VCC = 5V
s LOW POWER DISSIPATION:
ICC = 4 µA (MAX.) at TA = 25 oC
s HIGH NOISE IMMUNITY:
VNIH = VNIL = 28% VCC (MIN.)
s POWER DOWN PROTECTION ON INPUTS
s SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 8 mA (MIN)
s BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL
s OPERATING VOLTAGE RANGE:
VCC (OPR) = 2V to 5.5V
s PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 574
s IMPROVED LATCH-UP IMMUNITY
s LOW NOISE VOLP = 0.9V (Max.)
DESCRIPTION
The 74VHC574 is an advanced high-speed
CMOS OCTAL D-TYPE FLIP FLOP with 3
STATE OUTPUT NON INVERTING fabricated
with sub-micron silicon gate and double-layer
metal wiring C2MOS technology.
This 8 bit D-Type flip-flop is controlled by a clock
input (CK) and an output enable input (OE).
On the positive transition of the clock, the Q
outputs will be set to logic states that were setup
M
(Micro Package)
T
(TSSOP Package)
ORDER CODES :
74VHC574M
74VHC574T
at the D inputs.
While the OE input is low, the 8 outputs will be in
a normal logic state (high or low logic level) and,
while high level, the outputs will be in a high
impedance state.
The output control does not affect the internal
operation of flip flop; that is, the old data can be
retained or the new data can be entered even
while the outputs are off.
Power down protection is provided on all inputs
and 0 to 7V can be accepted on inputs with no
regard to the supply voltage. This device can be
used to interface 5V to 3V.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
PIN CONNECTION AND IEC LOGIC SYMBOLS
June 1999
1/10
1 page  
74VHC574
DYNAMIC SWITCHING CHARACTERISTICS
Symb ol
Parameter
Test Conditions
V CC
( V)
Value
TA = 25 oC
Min. Typ. Max.
-40 to 85 oC
Min . Max.
Un it
VOLP
VOLV
VIHD
Dynamic Low Voltage
Quiet Output (note 1, 2)
Dynamic High Voltage
Input (note 1, 3)
5.0
5.0
CL = 50 pF
0.6 0.9
-0.9 -0.6
3.5
V
VILD Dynamic Low Voltage
Input (note 1, 3)
5.0
1.5
1) Worst case package.
2) Max number of outputs defined as (n). Data inputs are driven 0V to 5.0V, (n -1) outputs switching and one output at GND.
3) Max number of data inputs (n) switching. (n-1) switching 0V to5.0V. Inputs under test switching: 5.0V to threshold (VILD), 0V to threshold (VIHD), f=1MHz.
TEST CIRCUIT
TEST
tPLH, tPHL
tPZL, tPLZ
tPZH, tPHZ
CL = 15/50 pF or equivalent (includes jig and probe capacitance)
RL = R1 = 1KΩ orequivalent
RT = ZOUT of pulse generator (typically 50Ω)
SW IT CH
Open
VCC
GND
5/10
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet 74VHC574T.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| 74VHC574 | OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING | STMicroelectronics |
| 74VHC574 | Octal D-Type Flip-Flop with 3-STATE Outputs |  Fairchild Semiconductor |
| 74VHC574M | OCTAL D-TYPE FLIP FLOP WITH 3 STATE OUTPUT NON INVERTING | STMicroelectronics |
| 74VHC574M | Octal D-Type Flip-Flop with 3-STATE Outputs | Fairchild Semiconductor |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |