파트넘버.co.kr E7536 데이터시트 PDF


E7536 반도체 회로 부품 판매점

HIGH PRECISION LAMP HOUSING



Hamamatsu Corporation 로고
Hamamatsu Corporation
E7536 데이터시트, 핀배열, 회로
For 150 W/200 W
Xenon lamps and Mercury-Xenon lamps
NEW HIGH PRECISION
LAMP HOUSING E7536
PATENT PENDING
HIGH SAFETY
The internal cooling fan
ensures safe operation.
ADJUSTABLE OUTPUT LIGHT
The built-in focus lens allows
light flux adjustment.
HIGH ACCURACY
Stationary emission point
ensures high accuracy.
FEATURES
qHigh accuracy
The E7536 lamp housing was designed to extract the full
capabilities of lamps. One example of this is the stationary
emission point which ensures high accuracy and easy opti-
cal design. The E7536 also delivers high output stability,
making it ideally suited for high-precision photometric appli-
cations. Light output stability(p-p) is better than 0.3 % Typ.
(when used with a Hamamatsu Xenon lamps) or 1.0 % Typ.
(when used with a Hamamatsu Mercury-Xenon lamps).
qHigh output intensity and collimated light flux
A reflective mirror and focus lens are incorporated. The mir-
ror collects light from a lamp very efficiently to obtain a high
output of over 1.5 times. The focus lens can be used to pro-
vide collimated light output.
qBuilt-in starter for improved lamp start-up operation
The built-in starter prevents high-voltage leakage, thus
improving start-up operation of the lamp and also minimiz-
ing noise which might otherwise occur at lamp start-up.
INTERLOCK FUNCTION
HIGH OUTPUT INTENSITY
Built-in reflective mirror
EASY OPTICAL AXIS
ALIGNMENT DURING
LAMP REPLACEMENT
IMPROVED START-UP
OPERATION
A starter is incorporated.
TLSXF0129
qAdjustable light flux
The focus lens can be moved back and forth by turning the
screw on the front flange (with the accessory tool), to adjust
the output light flux. The desired light flux can be easily
obtained to match your specific application.
qEasy optical axis adjustment during lamp replacement
The optical axis can be easily adjusted by using the acces-
sory tool, without removing any lamp housing covers. Three
adjustment screws are provided in easy-to-access posi-
tions: one on the side of the housing (for right-left move-
ment of the lamp), one at the upper part on the rear (for ver-
tical movement of the lamp), and one in the center on the
rear (for back and forth movement of the mirror).
qInterlock function
If the side cover becomes loose or the temperature in the
lamp housing rises to an abnormal level, the interlock
function triggers automatically to stop lamp operation.
qHigh safety
The built-in cooling fan maintains the surface temperature of
the lamp housing to a safe level below +40 °C.


E7536 데이터시트, 핀배열, 회로
FEATURES
HIGH PRECISION LAMP HOUSING
Parameter
Description/Value
Suitable Lamps (Rating and kind)
150 W
150 W
150 W (GS)
200 W
Xenon Lamps Mercury-Xenon Lamps Xenon Lamps Mercury-Xenon Lamps
Suitable Lamps Fused Silica Window
Lamp Type No.
Ozone-free Silica Window
L2175
L2195
L2482
L7047
L2273
L2274
L2423
L2570
Lamp Current
7.5 A
8.5 A
8.0 A
Lamp Voltage
20 V Typ.
18 V Typ.
24 V Typ.
Material
Fused Silica
Focus Lens
Dimension
Focal Point
30 mm
F = 30 mm (550 nm)
Optical
Light Output
Collimating
Material
BK7 Al + MgF2 Coating (All reflection)
Reflective Mirror Dimension
30 mm
Curvature
R = 30 mm
Optical Axis Height
140 mm (exclude plastic feet height)
Starter Output Voltage
Cooling Function
30 kV Typ.
Forced Air Cooling (Built-in automatic cooling fanA)
Operating Ambient Temperature
0 °C to +40 °C
Recommended Operating Temperature
+5 °C to +35 °C
Operating Humidity
30 % to 90 % (without moisture condensation)
Dimensions (W × H × D)
100 mm × 100 mm × 280 mm (exclude projection part)
Weight
Approx. 3.5 kg
Suitable Power Supply Type No.
C4263, C7535
C4264, C7535
C7535
NOTE: A The cooling fan automatically starts when the temperature rises inside the lamp housing.
DIMENSIONAL OUTLINES (Unit: mm) APPLICATIONS
COOLING FAN FRONT VIEW
FOCUS LENS
BACK AND FORTH
ADJUSTMENT
SCREW
M3 HEX SOCKET
HEAD BOLT
M37 P=1
SIDE COVER
MOUTING
SCREW
4-M3 HEX
SOCKET
HEAD BOLT
SIDE VIEW
SIDE COVER
(REMOVE THIS
COVER WHEN
REPLACING LAMP)
LAMP
VERTICAL
ADJUSTMENT
SCREW
qLight sources in various experiments
qLight sources in spectrophotometry
STABILITY
TLSXB0107EB
OUTPUT
LENS
( 30)
50
100
LAMP
RIGHT-LEFT
ADJUSTMENT
SCREW
M3 HEX
SOCKET
HEAD BOLT
5
100
MIRROR BACK
AND FORTH
ADJUSTMENT
SCREW
5
5 min
BOTTOM VIEW
M4
TIME
Block Diagram for Measurement
4-M4
PLASTIC FEET ARE ATTACHED
TO THE BOTTOM OF THE UNIT
BUT CAN BE REMOVED TO USE
THEIR HOLES FOR INSTALLATION
39 OF THE LAMP HOUSING.
LAMP
HOUSING
E7536
0.1 % ND FILTER
APERTURE 1 × 1 mm
10 % ND FILTER DIFFUSER
78
* PATENT PENDING: JAPAN 2
TLSXA0083EB
POWER SUPPLY
C7535
300 mm
150 W XENON LAMP
L2274
SILICON
PHOTODIODE
METER COMPUTER
TLSXC0041EB
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject
to change without notice. No patent rights are granted to any of the circuits described herein. ©1999 Hamamatsu Photonics K.K
HAMAMATSU PHOTONICS K.K., Electron Tube Center
314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: 44(20)8-367-3560, Fax: 44(20)8-367-6384
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01
Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741
TLSX1030E02
NOV. 1999 SI
(500)




PDF 파일 내의 페이지 : 총 2 페이지

제조업체: Hamamatsu Corporation

( hamamatsu )

E7536 data

데이터시트 다운로드
:

[ E7536.PDF ]

[ E7536 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


E7536

HIGH PRECISION LAMP HOUSING - Hamamatsu Corporation