파트넘버.co.kr AT-1210-H 데이터시트 PDF


AT-1210-H 반도체 회로 부품 판매점

High Power Fixed Attenuators (Heat sink Mounting Type)



Hirose Electric 로고
Hirose Electric
AT-1210-H 데이터시트, 핀배열, 회로
High Power Fixed Attenuators (Heat sink Mounting Type)
AT-1200 and AT-1300 Series
AT-1210-H J
AT-1320-H J
sFeatures
1.Small Size and Economical
Beryllia is used for the material of the resistance
element to enable the attenuation to be of small
size and low cost.
2.High Power Capacity
Mounting these attenuators to a heat sink permits the
AT-1200 Series to be used at up to 30 W and the AT-
1300 Series to be used at up to 50 W.
3.High Reliability
These attenuators show stable characteristics for
environments of varying temperature, humidity, and
gases.
sProduct Specifications
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
DC to 2.0 GHz
50 ohms
30 to 50 W
Operating temperature range
Operating relative humidity
Note: The frequency range and the maximum input power will differ depending on the products.
-10ç to +65ç
95% Max.
Item
1.Vibration
2.Shock
Standard
No electrical discontinuity of 1 µs or more
No damage, cracks, or parts dislocation
3.Temperature cycle No damage, cracks, or parts dislocation
qThe test method conforms to MIL-STD-202.
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s2 for 2 hours in each of 3 directions
Acceleration of 490 m/s2, sine half-wave waveform,
3 cycles in each of the 3 axis
Temperature: -55ç ¡ +5ç to +35ç ¡ +85ç ¡ +5ç to +35ç
Time: 30 ¡ 15 max. ¡ 30 ¡ 15 max. (Minutes)
200 cycles
sMaterials
Part
Connector Body
Body
Female contacts
Insulation
Attenuation element
Material
Stainless steel
Aluminum
Beryllium copper
PTFE
Metal film
Finish
Passivated
Conductive white alumite
Gold plating
----------
----------
sOrdering Information
AT - 12 10 - H J
1 23
4
1 AT: Indicates a fixed attenuator
2 Indicates the Series Name
(Maximum Usable Power)
12: HRM type plug - jack 30W
13: N type plug - jack 50W
3 Attenuation
10 : 10dB
20 : 20dB
4 Coupling Portion
H J : SMA type jack - jack
N H : N type jack - SMA type jack
88


AT-1210-H 데이터시트, 핀배열, 회로
sSpecifications
Frequency
Part Number Range
(GHz)
Attenuation V.S.W.R.
(dB) (Max)
AT-1210-H J DC~1
10±0.5
1.2
Impedance
(ohms)
50
Power
(W)
Heat Sink
Temperature at
Maximum Load
(çMax)
30W(CW)
+65
Connectors
Weight
(g)
HRM-J J
54
AT-1220-H J DC~1
20±0.5
1.2
50
30W(CW)
+65
HRM-J J
54
AT-1310-H J DC~2
10±0.5
1.2
50
50W(CW)
+65
HRM-J J
54 π
AT-1320-H J DC~2
20±0.5
1.2
πThe AT-1300 Series has input and output directivity.
sExternal Dimensions
50
50W(CW)
+65
HRM-J J
54 π
sTypical Data
AT-1220
AT-1200-H J
AT-1300-H J
AT-1320
89




PDF 파일 내의 페이지 : 총 2 페이지

제조업체: Hirose Electric

( hirose )

AT-1210-H data

데이터시트 다운로드
:

[ AT-1210-H.PDF ]

[ AT-1210-H 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


AT-1210-H

High Power Fixed Attenuators (Heat sink Mounting Type) - Hirose Electric



AT-1210-J

High Power Fixed Attenuators (Heat sink Mounting Type) - Hirose Electric