|
Avago |
HCPL-260L/060L/263L/063L
High Speed LVTTL Compatible 3.3 V Optocouplers
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-260L/060L/263L/063L are optically coupled
gates that combine a GaAsP light emitting diode and
an integrated high gain photo detector. An enable in-
put allows the detector to be strobed. The output of
the detector IC is an open collector Schottky-clamped
transistor. The internal shield provides a guaranteed
common mode transient immunity specification of
15 kV/µs at 3.3V.
This unique design provides maximum AC and DC circuit
isolation while achieving LVTTL/LVCMOS compati-bili-
ty. The optocoupler AC and DC operational parameters
are guaranteed from –40 °C to +85 °C allowing trouble-
free system performance.
These optocouplers are suitable for high speed logic
interfacing, input/output buffering, as line receivers in
environments that conventional line receivers cannot
tolerate and are recommended for use in extremely high
ground or induced noise environments.
Functional Diagram
HCPL-260L/060L
HCPL-263L/063L
NC 1
8 VCC ANODE 1 1
8 VCC
ANODE 2
7 VE CATHODE 1 2
7 VO1
CATHODE 3
6 VO CATHODE 2 3
6 VO2
NC 4 SHIELD
5 GND
Truth Table
(Positive Logic)
LED Enable Output
ON H
L
OFF H
H
ON L
H
OFF L
H
ON NC L
OFF NC H
ANODE 2 4
SHIELD
5 GND
Truth Table
(Positive Logic)
LED Output
ON L
OFF H
Features
• 3.3V/5V Dual Supply Voltages
• Low power consumption
• 15 kV/µs minimum Common Mode Rejection (CMR) at
VCM = 1000 V
• High speed: 15 MBd typical
• LVTTL/LVCMOS compatible
• Low input current capability: 5 mA
• Guaranteed AC and DC performance over tempera-
ture: –40 °C to +85 °C
• Available in 8-pin DIP, SOIC-8
• Strobable output (single channel products only)
• Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-5
Applications
• Isolated line receiver
• Computer-peripheral interfaces
• Microprocessor system interfaces
• Digital isolation for A/D, D/A conversion
• Switching power supply
• Instrument input/output isolation
• Ground loop elimination
• Pulse transformer replacement
• Field buses
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Ordering Information
HCPL-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577
Part number
HCPL-260L
HCPL-263L
HCPL-060L
HCPL-063L
Option
RoHS Non RoHS
Compliant Compliant
-000E No option
-300E
-300
-500E
#500
-020E
-020
-320E
-320
-520E
-520
-060E
#060
-560E
#560
-000E No option
-300E
#300
-500E
#500
-020E
#020
-320E
-320
-520E
#520
-060E
-060
-560E
-560
-000E No option
-500E
#500
-060E
#060
-560E
-560
-000E No option
-500E
#500
-060E
-060
-560E
-560
Package
300mil
DIP-8
300mil
DIP-8
SO-8
SO-8
Surface
Mount
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Gull
Wing
X
X
X
X
X
X
X
X
X
X
Tape
& Reel
X
X
X
X
X
X
X
X
X
X
UL 5000
Vrms/ 1 Min-
ute rating
X
X
X
X
X
X
IEC/EN/DIN
EN 60747-5-5
X
X
X
X
X
X
X
X
Quantity
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
50 per tube
1000 per reel
50 per tube
1000 per reel
100 per tube
1500 per reel
100 per tube
1500 per reel
100 per tube
1500 per reel
100 per tube
1500 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry. Combination of Option 020 and Option 060 is not available.
Example 1:
HCPL-260L-560E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packaging with
IEC/EN/DIN EN 60747-5-5 Safety Approval in RoHS compliant.
Example 2:
HCPL-263L to order product of 300mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use ‘-XXXE‘.
2
|