OB2211H 반도체 회로 부품 판매점
Primary-Side PWM Power Switch
|
|
 On-Bright Electronics |
OB2211H
Primary-Side PWM Power Switch with CC/CV
GENERAL DESCRIPTION
OB2211H is an offline PWM Power switch for low
power AC/DC charger and adaptor applications. It
operates in primary-side sensing and regulation.
Consequently, opto-coupler and TL431 could be
eliminated. Proprietary Constant Voltage (CV) and
Constant Current (CC) control is integrated as shown
in the figure below.
In CC control, the current and output power setting
can be adjusted externally by the sense resistor Rs at
CS pin. In CV control, multi-mode operations are
utilized to achieve high performance and high
efficiency. Device operates in fixed frequency mode
at large load conditions, frequency reduction mode at
light/medium load and ‘Extended burst mode’ at
No/light load conditions.
OB2211H offers power on soft start control and
protection coverage with auto-recovery features
including Cycle-by-Cycle current limiting, VDD
clamp and UVLO. Excellent EMI performance is
achieved with On-Bright proprietary frequency
shuffling technique together with soft switching
control at the totem pole gate drive output.
OB2211H achieves better CC control accuracy and
higher system efficiency through PWM control than
its sibling part OB2211.
FEATURES
Primary-side Sensing and Regulation Without
TL431 and Opto-coupler
Multi-mode Operation for High Efficiency
Programmable CV and CC Regulation
Adjustable Constant Current and Output Power
setting
Frequency Shuffling and Adjustable Gate Drive
Greatly Improving EMI
Power on Soft-start Time (4ms)
“Extended Burst Mode Control” for Improved
Efficiency and Minimum Standby Design
Built-in Leading Edge Blanking (LEB)
Cycle-by-Cycle Current Limiting
VDD Under Voltage Lockout with Hysteresis
(UVLO)
VDD Clamp
APPLICATIONS
Low Power AC/DC offline SMPS for
Cell Phone Charger
Digital Cameras Charger
Small Power Adaptor
Auxiliary Power for PC, TV etc.
Linear Regulator/RCC Replacement
OB2211H is offered in SOP8 package.
Fig 1. Typical CC/CV Curve
TYPICAL APPLICATION
©On-Bright Electronics
-1-
Confidential
OB_DOC_DS_11HA0
GENERAL INFORMATION
Pin Configuration
The pin map is shown as below for SOP8
Ordering Information
Part Number Description
OB2211HCP
SOP8, Pb-free, Tube
OB2211HCPA SOP8, Pb-free, T&R
OB2211H
Primary-Side PWM Power Switch with CC/CV
Absolute Maximum Ratings
Parameter
Drain Voltage (off state)
Value
-0.3V to Bvdss
VDD Voltage
VDDG Voltage
VDD Zener Clamp
-0.3 to VDD_clamp
-0.3 to VDD_clamp
10 mA
Continuous Current
CS Input Voltage
-0.3 to 7V
INV Input Voltage
Min/Max Operating
-0.3 to 7V
-20 to 150 oC
Junction Temperature TJ
Min/Max Storage
-55 to 150 oC
Temperature Tstg
Lead Temperature
260 oC
(Soldering, 10secs)
Note: Stresses beyond those listed under “absolute maximum
ratings” may cause permanent damage to the device. These are
stress ratings only, functional operation of the device at these or
any other conditions beyond those indicated under “recommended
operating conditions” is not implied. Exposure to absolute
maximum-rated conditions for extended periods may affect device
reliability.
©On-Bright Electronics
-2-
Confidential
OB_DOC_DS_11HA0
|
PDF 파일 내의 페이지 : 총 10 페이지
제조업체: On-Bright Electronics
( on-bright )
OB2211H data
데이터시트 다운로드 :
[ OB2211H.PDF ]
[ OB2211H 다른 제조사 검색 ]
국내 전력반도체 판매점
상호 : 아이지 인터내셔날
전화번호 : 051-319-2877
[ 홈페이지 ]
IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈
( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )
전력반도체 문의 : 010-3582-2743
관련 데이터시트
OB2211
Primary-Side Regulation PWM Power Switch - On-Bright
OB2211H
Primary-Side PWM Power Switch - On-Bright Electronics