|
LGE |
5.0SMDJ Series
Rating and Characteristic Curves 5.0SMDJ Series
VOLTAGE-5.0 TO 170 Volts
5000 Watt Peak Pulse Power
Features
For surface mounted applications in order to
optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Excellent clamping capability
Repetition rate (duty cycle):0.01%
Fast response time: typically less than
1.0 ps from 0 volts to BV for unidirectional types
Typical IR less than 1µA above 10V
High temperature soldering:
250°C/10 seconds at terminals
Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
Mechanical Data
Case: JEDEC DO214AB. Molded plastic over glass
passivated junction
Polarity: Color band denoted positive end (cathode)
except Bidirectional
Weight: 0.021 grams
SMC/DO-214AB
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25 oC ambient temperature unless otherwise specified.
RATING
SYMBOL
VALUE
Peak Pulse Power Dissipation on 10/1000 µs
waveform (NOTE 1, 2, Fig.1)
PPPM
Minimum 5000
Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3)
IPPM SEE TABLE 1
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note2, 3)
IFSM
400
Operatings and Storage Temperature Range
NOTES:
TJ, TSTG
-55 +150
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
UNITS
Watts
Amps
Amps
°C
http://www.luguang.cn
mail:[email protected]
Fig. 1 - Peak Pulse Power Rating Curve
100
Non-repetitive pulse
waveform shown in
Fig.3 TA = 25°C
10
1
0.1
0.1μs
1.0μs
10μs
100μs
td - Pulse Width (sec.)
1.0ms
10ms
5.0SMDJ Series
Rating and Characteristic Curves 5.0SMDJ Series
100
87.5
75
62.5
50
37.5
25
12.5
0
0
Fig.2 - Pulse Derating Curve
25 50 75 100 125 150 175 200
TA - Ambient Temperature (°C)
Fig.3 - Pulse Waveform
150
tr = 10μsec.
TJ = 25°C
Pulse Width(td)is defined
Peak Value
as the point where the
IPPM
100
peak current decays to
Half Value- IPPM
50% of IPPM
2
50
0
0
8.0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
10/1000μsec.Waveform
as defined by R.E.A.
td
1.0 2.03.0
t - Time(ms)
3.0 4.0
Fig. 5 - Steady State Power
Derating Curve
60Hz
Resistive or
Inductive Load
10000
1000
100
10
1
4.0
0
0
25 50 75 100 125 150 175 200
TL - Lead Temperature (°C)
10000
1000
Fig. 4 - Typical Junction Capacitance
Unidirectional
Bidirectional
VR = 0
100
10
5
VR = Rated
Stand-off
f = 1MHz
Vsig = 50mVp-p
TJ = 25°C
1010 100 500
VWM - Reverse Stand-Off Voltage (V)
1000
Fig.6 - Maximum Non-Repetitive Forward
Surge Current Uni-Directional Only
300
8.3ms Single Half Sine-Wave
(JEDEC Method)TJ=TJ max.
250
200
150
100
1
10
Number of Cycles at 60 Hz
100
http://www.luguang.cn
mail:[email protected]
|