|
|
PDF NJG1159PHH Data sheet ( Hoja de datos )
| Número de pieza | NJG1159PHH | |
| Descripción | GNSS Front-End Module | |
| Fabricantes | New Japan Radio | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NJG1159PHH (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
|
No Preview Available !
NJG1159PHH
GNSS Front-End Module
I GENERAL DESCRIPTION
The NJG1159PHH is a front-end module (FEM) designed for GNSS including
GPS, GLONASS, BeiDou, and Galileo applications. This FEM offers low noise
figure, high linearity, and high out-band rejection characteristics brought by
included high performance pre-SAW filter and low noise amplifier (LNA). This
FEM can operate from 1.5V to 3.3V single voltage in -40 to 105°C. This FEM has
stand-by mode to save current consumption.
This FEM offers very small mounting area by included one SAW filter, only two
external components, and very small package HFFP10-HH that is 1.5x1.1mm.
I PACKAGE OUTLINE
I FEATURES
G Available for GNSS
G Low supply voltage
1.8/ 2.8V typ.
G Low current consumption
G High gain
3.0/3.7mA typ. @VDD=1.8/ 2.8V, VCTL=1.8V
0.1µA typ.
@VDD=1.8/ 2.8V, VCTL=0V (Stand-by mode)
15.5/16.0dB typ. @VDD=1.8/ 2.8V, VCTL=1.8V,
f=1575MHz, 1559 to 1591MHz
G Low noise figure
1.55/1.50dB typ. @VDD=1.8/ 2.8V, VCTL=1.8V, f=1575MHz
G High out band rejection
1.70/1.65dB typ. @VDD=1.8/ 2.8V, VCTL=1.8V, f=1597 to 1606MHz
1.75/1.70dB typ. @VDD=1.8/ 2.8V, VCTL=1.8V, f=1559 to 1591MHz
55dBc typ.
@f=704 to 915MHz, relative to 1575MHz
43dBc typ.
@f=1710 to 1980MHz, relative to 1575MHz
51dBc typ.
@f=2400 to 2500MHz, relative to 1575MHz
G Small package size
HFFP10-HH: 1.5mmx1.1mm (typ.), t=0.5mm (max.)
G RoHS compliant and Halogen Free, MSL1
I PIN CONFIGURATION
1 pin index (Top View)
VDD
GND
19
VCTL
2
LNA
GND Pre-Filter
3
PreIN
4
10
GND
LNAOUT
8
LNAIN
7
PreOUT
6
GND
5
I BLOCK DIAGRAM
VCTL
VDD
Pin Connection
1. VDD
2. VCTL
3. GND
4. PreIN
5. GND
RF IN
6. PreOUT
7. LNAIN
8. LNAOUT
9. GND
10. GND
Pre-Filter
LNA
GND
RF OUT
I TRUTH TABLE
“H”=VCTL(H), “L”=VCTL(L)
VCTL
Mode
H Active mode
L Stand-by mode
Note: Specifications and description listed in this datasheet are subject to change without notice.
Ver.2016-04-18
-1-
1 page  
NJG1159PHH
I TERMINAL INFORMATION
No. SYMBOL
DESCRIPTION
1
VDD
Supply voltage terminal. Please connect bypass capacitor C1 with ground as
close as possible.
2 VCTL Control voltage terminal.
3
GND
Ground terminal. This terminal should be connected to the ground plane as close
as possible for excellent RF performance.
4 PreIN RF input terminal. This terminal connects to input of pre-SAW filter.
5
GND
Ground terminal. This terminal should be connected to the ground plane as close
as possible for excellent RF performance.
6 PreOUT Pre-SAW filter output terminal. This terminal connects to LNAIN with L1.
7
LNAIN
RF input terminal. This terminal requires only a matching inductor L1, and
does not require DC blocking capacitor because of integrated capacitor.
8
LNAOUT
RF output terminal. This terminal requires no DC blocking capacitor since this
terminal has integrated DC blocking capacitor.
9
GND
Ground terminal. This terminal should be connected to the ground plane as close
as possible for excellent RF performance.
10
GND
Ground terminal. This terminal should be connected to the ground plane as close
as possible for excellent RF performance.
-5-
5 Page 
NJG1159PHH
I ELECTRICAL CHARACTERISTICS
Conditions: VDD=1.8V, VCTL=1.8V, Ta=25°C, Zs=Zl=50Ω, with application circuit
Out-of-band P-1dB (fjam=900MHz)
Out-of-band P-1dB (fjam=1710MHz)
(VDD=1.8V, VCTL=1.8V, fmeas=1575MHz at Pin=-40dBm)
20 9
(VDD=1.8V, VCTL=1.8V, fmeas=1575MHz at Pin=-40dBm)
20 9
18
Gain
16
8 18
Gain
7 16
8
7
14 6 14 6
12 5 12 5
10
IDD
8
4 10
IDD
38
4
3
6
P-1dB(IN)_OB>+26.0dBm
(Gain: Exclude PCB, Connector Losses)
4
-40 -30 -20 -10 0
10 20
Pin at 900MHz (dBm)
2
1
30
Out-of-band IIP2
(VDD=1.8V, VCTL=1.8V, fmeas=1575.4MHz,
f1=824.6MHz, f2=2400MHz)
120
100
80
60
40
20
Pout
0
-20
-40
IM2
-60
-80
-100
-40
0
IIP2_OB=+84.4dBm
-20 0 20 40 60 80
Pin (dBm)
2nd Harmonics
(VDD=1.8V, VCTL=1.8V,
fin=787.76MHz, fmeas=1575.52MHz)
100
-10
-20
-30 2fo=-34.8dBm
-40
-50
-60
-70
-80
-90
-100
-20 -10 0 10 20 30
Pin (dBm)
6
P-1dB(IN)_OB=+23.1dBm
(Gain: Exclude PCB, Connector Losses)
4
-40 -30 -20 -10 0
10 20
Pin at 1710MHz (dBm)
Out-of-band IIP3
(VDD=1.8V, VCTL=1.8V, fmeas=1575.4MHz,
f1=1712.7MHz, f2=1850MHz)
100
2
1
30
80
60
40
20
0 Pout
-20
-40
-60 IM3
-80
-100
-40
-20
IIP3_OB=+53.3dBm
0 20 40
Pin (dBm)
60
80
- 11 -
11 Page | ||
| Páginas | Total 20 Páginas | |
| PDF Descargar | [ Datasheet NJG1159PHH.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NJG1159PHH | GNSS Front-End Module | New Japan Radio |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |