|
Analog Devices |
Data Sheet
700 MHz to 2700 MHz Rx Mixer with Integrated
IF DGA, Fractional-N PLL, and VCO
ADRF6620
FEATURES
Integrated fractional-N phase-locked loop (PLL)
RF input frequency range: 700 MHz to 2700 MHz
Internal local oscillator (LO) frequency range: 350 MHz to
2850 MHz
Input P1dB: 17 dBm
Output IP3: 45 dBm
Single-pole four-throw (SP4T) RF input switch
Digital step attenuator (DSA) range: 0 dB to 15 dB
Integrated RF tunable balun allowing single-ended 50 Ω input
Multicore integrated voltage controlled oscillator (VCO)
Digitally programmable variable gain amplifier (DGA)
−3 dB bandwidth: >600 MHz
Balanced 150 Ω IF output impedance
Programmable via 3-wire serial port interface (SPI)
Single 5 V supply
APPLICATIONS
Wireless receivers
Digital predistortion (DPD) receivers
GENERAL DESCRIPTION
The ADRF6620 is a highly integrated active mixer and synthesizer
that is ideally suited for wireless receiver subsystems. The feature
rich device consists of a high linearity broadband active mixer;
an integrated fractional-N PLL; low phase noise, multicore VCO;
and IF DGA. In addition, the ADRF6620 integrates a 4:1 RF
switch, an on-chip tunable RF balun, programmable RF attenuator,
and low dropout (LDO) regulators. This highly integrated device
fits within a small 7 mm × 7 mm footprint.
The high isolation 4:1 RF switch and on-chip tunable RF balun
enable the ADRF6620 to support four single-ended 50 Ω
terminated RF inputs. A programmable attenuator ensures
optimal RF input drive to the high linearity mixer core. The
integrated DSA has an attenuation range of 0 dB to 15 dB with
a step size of 1 dB.
FUNCTIONAL BLOCK DIAGRAM
RFIN0
RFIN1
RFIN2
RFIN3
IFOUT1–
IFOUT1+
IFOUT2–
IFOUT2+
REFIN
÷8
÷4
÷2
×1
×2
LOIN+
LOIN–
PFD CHARGE CP
+ PUMP
VTUNE
÷1, ÷2,
÷4, ÷8
N = INT + FRAC
MOD
÷2
LOIN+
LOIN–
VTUNE
CP
MUXOUT
LOCK_DET
VPTAT
LDO
2.5 V
SERIAL
PORT
INTERFACE
LDO
VCO
LDO
3.3V
Figure 1.
The ADRF6620 offers two alternatives for generating the dif-
ferential LO input signal: externally, via a high frequency, low
phase noise LO signal, or internally, via the on-chip fractional-N
PLL synthesizer. The integrated synthesizer enables continuous
LO coverage from 350 MHz to 2850 MHz. The PLL reference
input can support a wide frequency range because the divide and
multiply blocks can be used to increase or decrease the reference
frequency to the desired value before it is passed to the phase
frequency detector (PFD).
The integrated high linearity DGA provides an additional gain
range from 3 dB to 15 dB in steps of 0.5 dB for maximum flexibility
in driving an analog-to-digital converter (ADC).
The ADRF6620 is fabricated using an advanced silicon-germanium
BiCMOS process. It is available in a 48-lead, RoHS-compliant,
7 mm × 7 mm LFCSP package with an exposed pad. Performance
is specified over the −40°C to +85°C temperature range.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
ADRF6620* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
• ADRF6620 Evaluation Board
DOCUMENTATION
Data Sheet
• ADRF6620: 700 MHz to 2700 MHz Rx Mixer with
Integrated IF DGA, Fractional-N PLL, and VCO Data Sheet
User Guides
• UG-558: Evaluating the ADRF6620, a 700 MHz to 2700
MHz Rx Mixer with Integrated IF Amplifier, Fractional-N
PLL, and VCO
SOFTWARE AND SYSTEMS REQUIREMENTS
• ADRF6620 Evaluation Board Software
TOOLS AND SIMULATIONS
• ADRF6620 S-Parameters
REFERENCE MATERIALS
Product Selection Guide
• RF Source Booklet
DESIGN RESOURCES
• ADRF6620 Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints
DISCUSSIONS
View all ADRF6620 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.
|