|
|
Número de pieza | BlueNRG-MS | |
Descripción | Upgradable Bluetooth Low Energy network processor | |
Fabricantes | STMicroelectronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de BlueNRG-MS (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! BlueNRG-MS
Upgradable Bluetooth® Low Energy network processor
Datasheet - production data
Features
• Bluetooth specification v4.1 compliant
master and slave single-mode Bluetooth low
energy network processor
• Embedded Bluetooth low energy protocol
stack: GAP, GATT, SM, L2CAP, LL, RF-
PHY
• Bluetooth low energy profiles provided
separately
• Operating supply voltage: from 1.7 to 3.6 V
• 8.2 mA maximum TX current (@0 dBm, 3.0
V)
• Down to 1.7 µA current consumption with
active BLE stack
• Integrated linear regulator and DC-DC step-
down converter
• Up to +8 dBm available output power (at
antenna connector)
• Excellent RF link budget (up to 96 dB)
• Accurate RSSI to allow power control
• Proprietary application controller interface
(ACI), SPI based, allows interfacing with an
external host application microcontroller
• Full link controller and host security
• High performance, ultra-low power Cortex-
M0 32-bit based architecture core
• Upgradable BLE stack (stored in embedded
Flash memory, via SPI)
• AES security co-processor
• Low power modes
• 16 or 32 MHz crystal oscillator
• 12 MHz ring oscillator
• 32 kHz crystal oscillator
• 32 kHz ring oscillator
• Battery voltage monitor
• Compliant with the following radio frequency
regulations: ETSI EN 300 328, EN 300 440,
FCC CFR47 Part 15, ARIB STD-T66
• Available in QFN32 (5 x 5 mm) and
WLCSP34 (2.66 x 2.56 mm) packages
• Operating temperature range:
-40 °C to 85 °C
Applications
• Watches
• Fitness, wellness and sports
• Consumer medical
• Security/proximity
• Remote control
• Home and industrial automation
• Assisted living
• Mobile phone peripherals
• PC peripherals
Table 1: Device summary
Order code
Package
BLUENRG-MSQTR
QFN32
(5 x 5 mm)
BLUENRG-MSCSP
WLCSP34
(2.66 x 2.56 mm)
Packing
Tape and
reel
Tape and
reel
February 2016
DocID027103 Rev 6
1/42
www.st.com
1 page BlueNRG-MS
Description
1 Description
The BlueNRG-MS is a very low power Bluetooth low energy (BLE) single-mode network
processor, compliant with Bluetooth specification v4.1. The BlueNRG-MS supports multiple
roles simultaneously, and can act at the same time as Bluetooth Smart sensor and hub
device.
The Bluetooth Low Energy stack runs on the embedded ARM Cortex-M0 core. The stack is
stored on the on-chip non-volatile Flash memory and can be easily upgraded via SPI. The
device comes pre-programmed with a production-ready stack image (whose version could
change at any time without notice). A different or more up-to-date stack image can be
downloaded from the ST web site and programmed on the device through the ST provided
software tools.
The BlueNRG-MS allows applications to meet of the tight advisable peak current
requirements imposed with the use of standard coin cell batteries. The maximum peak
current is only 10 mA at 1 dBm of output power. Ultra low-power sleep modes and very
short transition times between operating modes allow very low average current
consumption, resulting in longer battery life. The BlueNRG-MS offers the option of
interfacing with external microcontrollers using SPI transport layer.
DocID027103 Rev 6
5/42
5 Page BlueNRG-MS
Application circuits
4 Application circuits
The schematics below are purely indicative. For more detailed schematics, please refer to
the "Reference design" and "Layout guidelines" which are provided as separate
documents.
Figure 5: BlueNRG-MS application circuit: active DC-DC converter QFN32 package
DocID027103 Rev 6
11/42
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet BlueNRG-MS.PDF ] |
Número de pieza | Descripción | Fabricantes |
BlueNRG-MS | Upgradable Bluetooth Low Energy network processor | STMicroelectronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |