파트넘버.co.kr AD9279 데이터시트 PDF


AD9279 반도체 회로 부품 판매점

Octal LNA/VGA/AAF/ADC and CW I/Q Demodulator



Analog Devices 로고
Analog Devices
AD9279 데이터시트, 핀배열, 회로
Octal LNA/VGA/AAF/ADC
and CW I/Q Demodulator
AD9279
FEATURES
8 channels of LNA, VGA, AAF, ADC, and I/Q demodulator
Low power: 141 mW per channel, TGC mode, 40 MSPS;
60 mW per channel, CW mode
10 mm × 10 mm, 144-ball CSP-BGA
TGC channel input-referred noise: 0.8 nV/Hz, max gain
Flexible power-down modes
Fast recovery from low power standby mode: <2 μs
Overload recovery: <10 ns
Low noise preamplifier (LNA)
Input-referred noise: 0.75 nV/√Hz, gain = 21.3 dB
Programmable gain: 15.6 dB/17.9 dB/21.3 dB
0.1 dB compression: 1000 mV p-p/
750 mV p-p/450 mV p-p
Dual-mode active input impedance matching
Bandwidth (BW): >100 MHz
Variable gain amplifier (VGA)
Attenuator range: −45 dB to 0 dB
Postamp gain (PGA): 21 dB/24 dB/27 dB/30 dB
Linear-in-dB gain control
Antialiasing filter (AAF)
Programmable second-order LPF from 8 MHz to 18 MHz
Programmable HPF
Analog-to-digital converter (ADC)
SNR: 70 dB, 12 bits up to 80 MSPS
Serial LVDS (ANSI-644, low power/reduced signal)
CW mode I/Q demodulator
Individual programmable phase rotation
Output dynamic range per channel: >160 dBc/√Hz
Output-referred SNR: 155 dBc/√Hz, 1 kHz offset, −3 dBFS
GENERAL DESCRIPTION
The AD9279 is designed for low cost, low power, small size,
and ease of use for medical ultrasound and automotive radar. It
contains eight channels of a variable gain amplifier (VGA) with
a low noise preamplifier (LNA), an antialiasing filter (AAF), an
analog-to-digital converter (ADC), and an I/Q demodulator
with programmable phase rotation.
Each channel features a variable gain range of 45 dB, a fully
differential signal path, an active input preamplifier termination,
and a maximum gain of up to 52 dB. The channel is optimized
for high dynamic performance and low power in applications
where a small package size is critical.
The LNA has a single-ended-to-differential gain that is selectable
through the SPI. Assuming a 15 MHz noise bandwidth (NBW)
and a 21.3 dB LNA gain, the LNA input SNR is roughly 94 dB.
In CW Doppler mode, each LNA output drives an I/Q demod-
ulator that has independently programmable phase rotation
with 16 phase settings.
Power-down of individual channels is supported to increase
battery life for portable applications. Standby mode allows quick
power-up for power cycling. In CW Doppler operation, the
VGA, AAF, and ADC are powered down. The ADC contains
several features designed to maximize flexibility and minimize
system cost, such as a programmable clock, data alignment, and
programmable digital test pattern generation. The digital test
patterns include built-in fixed patterns, built-in pseudo random
patterns, and custom user-defined test patterns entered via the
serial port interface.
FUNCTIONAL BLOCK DIAGRAM
AVDD1 AVDD2
PDWN STBY
DRVDD
LO-A TO LO-H
LOSW-A TO LOSW-H
LI-A TO LI-H
LG-A TO LG-H
LNA
I/Q
DEMODULATOR
VGA
AAF
8 CHANNELS
12-BIT
ADC
SERIAL
LVDS
DOUTA+ TO DOUTH+
DOUTA– TO DOUTH–
LO
GENERATION
REFERENCE
SERIAL
PORT
INTERFACE
DATA
RATE
MULTIPLIER
FCO+
FCO–
DCO+
DCO–
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2010 Analog Devices, Inc. All rights reserved.


AD9279 데이터시트, 핀배열, 회로
AD9279* Product Page Quick Links
Last Content Update: 11/01/2016
Comparable Parts
View a parametric search of comparable parts
Evaluation Kits
• AD9279 Evaluation Board
Documentation
Data Sheet
• AD9279: Octal LNA/VGA/AAF/ADC and CW I/Q
Demodulator
Software and Systems Requirements
• AD9279 Evaluation Board, ADC-FMC Interposer & Xilinx
ML605 Reference Design
Tools and Simulations
• Visual Analog
Reference Materials
Press
• Industry’s First Octal Ultrasound Receiver with Digital I/Q
Demodulator and Decimation Filter Reduces Processor
Overhead in Ultrasound Systems
• Low Cost, Octal Ultrasound Receiver with On-Chip RF
Decimator and JESD204B Serial Interface
Technical Articles
• MS-2210: Designing Power Supplies for High Speed ADC
Design Resources
• AD9279 Material Declaration
• PCN-PDN Information
• Quality And Reliability
• Symbols and Footprints
Discussions
View all AD9279 EngineerZone Discussions
Sample and Buy
Visit the product page to see pricing options
Technical Support
Submit a technical question or find your regional support
number
* This page was dynamically generated by Analog Devices, Inc. and inserted into this data sheet. Note: Dynamic changes to
the content on this page does not constitute a change to the revision number of the product data sheet. This content may be
frequently modified.




PDF 파일 내의 페이지 : 총 30 페이지

제조업체: Analog Devices

( analogs )

AD9279 data

데이터시트 다운로드
:

[ AD9279.PDF ]

[ AD9279 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


AD9271

Octal LAN/VGA/AAF/ADC and Crosspoint Switch - Analog Devices



AD9272

Octal LNA/VGA/AAF/ADC and Crosspoint Switch - Analog Devices



AD9273

Octal LNA/VGA/AAF/ADC and Crosspoint Switch - Analog Devices



AD9276

Octal LNA/VGA/AAF/12-Bit ADC and CW I/Q Demodulator - Analog Devices



AD9277

Octal LNA/VGA/AAF/14-Bit ADC And CW I/Q Demodulator - Analog Devices



AD9278

Octal LNA/VGA/AAF/ADC and CW I/Q Demodulator - Analog Devices



AD9279

Octal LNA/VGA/AAF/ADC and CW I/Q Demodulator - Analog Devices