파트넘버.co.kr WM5102S 데이터시트 PDF


WM5102S 반도체 회로 부품 판매점

Audio Hub CODEC



Wolfson Microelectronics 로고
Wolfson Microelectronics
WM5102S 데이터시트, 핀배열, 회로
w
WM5102S
Audio Hub CODEC with Master Hi-Fi DSP
DESCRIPTION
The WM5102S[1] is a highly-integrated low-power audio
system for smartphones, tablets and other portable audio
devices. It supports audiophile quality DAC playback on a
flexible, high-performance audio hub.
The WM5102S digital core provides a powerful combination
of fixed-function signal processing blocks with a
programmable DSP. These are supported by a fully-flexible,
all-digital audio mixing and routing engine with sample rate
converters, for wide use-case flexibility. The programmable
DSP supports a range of audio processing software
packages, including user-programmed solutions. A suite of
signal processing software packages is licensed as part of
the WM5102S product, though different audio algorithms
can also be implemented. Fixed-function signal processing
blocks include filters, EQ, dynamics processors and sample
rate converters.
A SLIMbus interface supports multi-channel audio paths and
host control register access. Multiple sample rates are
supported concurrently via the SLIMbus interface. Three
further digital audio interfaces are provided, each supporting
a wide range of standard audio sample rates and serial
interface formats. Automatic sample rate detection enables
seamless wideband/narrowband voice call handover.
Two stereo headphone drivers each provide stereo ground-
referenced or mono BTL outputs, with noise levels as low as
1µVRMS (HPOUT1) for hi-fi quality line or headphone output.
The CODEC also features stereo 2W Class-D speaker
outputs, a dedicated BTL earpiece output and PDM for
external speaker amplifiers. A signal generator for
controlling haptics devices is included; vibe actuators can
connect directly to the Class-D speaker output, or via an
external driver on the PDM output interface. All inputs,
outputs and system interfaces can function concurrently.
The WM5102S supports up to six microphone inputs, each
either analogue or PDM digital. Microphone activity
detection with interrupt is available. A smart accessory
interface supports most standard 3.5mm accessories.
Impedance sensing and measurement is provided for
external accessory and push-button detection.
The WM5102S power, clocking and output driver
architectures are all designed to maximise battery life in
voice, music and standby modes. Low-power ‘Sleep’ is
supported, with configurable wake-up events. The
WM5102S is powered from a 1.8V external supply. A
separate supply is required for the Class D speaker drivers
(typically direct connection to 4.2V battery).
Two integrated FLLs provide support for a wide range of
system clock frequencies. The WM5102S is configured using
the I2C, SPI or SLIMbus interfaces. The fully-differential
internal analogue architecture, minimal analogue signal
paths and on-chip RF noise filters ensure a very high degree
of noise immunity.
FEATURES
Audio hub CODEC with integrated DSP
Master Hi-Fi filters for audiophile quality DAC playback
Enhanced DRE processing (eDRE) for 120dB SNR
Fixed function signal processing functions
- Wind noise, sidetone and other high/low pass filters
- Dynamic Range Control, Fully parametric EQs
- Tone, Noise, PWM, Haptic control signal generators
Multi-channel asynchronous sample rate conversion
Integrated 6/7 channel 24-bit hi-fi audio hub CODEC
- 6 ADCs, 96dB SNR microphone input (48kHz)
- 7 DACs, 120dB SNR headphone playback (48kHz)
Audio inputs
- Up to 6 analogue or digital microphone inputs
- Single-ended or differential mic/line inputs
Multi-purpose headphone / earpiece / line output drivers
- 2 stereo output paths
- 29mW into 32load at 0.1% THD+N
- 100mW into 32BTL load at 5% THD+N
- 6.5mW typical headphone playback power consumption
- Pop suppression functions
- 1µVRMS noise floor (A-weighted, HPOUT1)
Mono BTL earpiece output driver
2 x 2W stereo Class D speaker output drivers
- Direct drive of external haptics vibe actuators
Two-channel digital speaker (PDM) interface
SLIMbus® audio and control interface
3 full digital audio interfaces
- Standard sample rates from 4kHz up to 192kHz
- Ultrasonic accessory function support
- TDM support on all AIFs
- 8 channel input and output on AIF1
Flexible clocking, derived from MCLKn, BCLKn or SLIMbus
2 low-power FLLs support reference clocks down to 32kHz
Advanced accessory detection functions
- Low-power standby mode and configurable wake-up
Configurable functions on 5 GPIO pins
Integrated LDO regulators and charge pumps
Support for single 1.8V supply operation
Small W-CSP package, 0.4mm pitch
APPLICATIONS
Smartphones and Multimedia handsets
Tablets and Mobile Internet Devices (MID)
Portable Music Players (PMP)
WOLFSON MICROELECTRONICS plc
Product Preview, April 2014, Rev 1.1
[1] This product is protected by Patents US 7,622,984, US 7,626,445, US 7,765,019 and GB 2,432,765
Copyright 2014 Wolfson Microelectronics plc


WM5102S 데이터시트, 핀배열, 회로
WM5102S
BLOCK DIAGRAM
Product Preview
w
PP, April 2014, Rev 1.1
2




PDF 파일 내의 페이지 : 총 30 페이지

제조업체: Wolfson Microelectronics

( wolfson )

WM5102S data

데이터시트 다운로드
:

[ WM5102S.PDF ]

[ WM5102S 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


WM5102

Audio Hub CODEC - Wolfson Microelectronics



WM5102S

Audio Hub CODEC - Wolfson Microelectronics