|
JIEJIE |
JIEJIE MICROELECTRONICS CO.,Ltd
JMC090-16/18/20
Description:
1) Chip: double mesa SCRs of reverse blocking high-voltage
2) Chip area: 10.8mm×10.8mm (central gate thyristor)
3) Technology: mesa glass passivation technology, multilayer metallization
technology and non-void welding by vacuum welding technology
Typical Application:
Reactive power compensation, solid state relay, power module, etc.
Absolute Maximum Ratings (Packaged into modules, unless otherwise specified, TC=25℃)
Parameter
Test Conditions Symbol
Values
Unit
Operating junction temperature range
Repetitive peak off-state voltage
Repetitive peak reverse voltage
Average on-state current
Tj=25℃
Tj=25℃
TC=80℃
Tj
VDRM
VRRM
IT(AV)
-40-125
1200/1600/1800
1200/1600/1800
90
℃
V
V
A
Peak on-state surge current
I2t value for fusing
Critical rate of rise of on-state current
tp=10ms
tp=10ms
VD=2/3VDRM tp=200μs
IG=0.3A Tj=125℃
dIG/dt=0.3A/μs
ITSM
I2t
dI/dt
2000
20000
150
A
A2s
A/μs
Electrical Characteristics (Packaged into modules, unless otherwise specified, TC=25℃)
Parameter
Peak on-state voltage
Repetitive peak off-state current
Repetitive peak reverse current
Triggering gate current
Latching current
Holding current
Triggering gate voltage
Test Conditions
IT=280A tp=380μs
VD=VDRM
TC=25℃
TC=125℃
VR=VRRM
TC=25℃
TC=125℃
VD=12V RL=30Ω
IG=1.2 IGT
IT=1A
VD=12V RL=30Ω
Symbol
VTM
IDRM1
IDRM2
IRRM1
IRRM2
IGT
IL
IH
VGT
Values
≤1.8
≤100
≤20
≤100
≤20
20-120
≤300
≤250
≤2
Unit
V
μA
mA
μA
mA
mA
mA
mA
V
TEL:+86-513-83639777
- 1 / 3-
http://www.jjwdz.com
JIEJIE MICROELECTRONICS CO.,Ltd
Non triggering gate voltage
VD=VDRM Tj=125℃
Critical rate of rise of voltage
VD=2/3VDRM Tj=125℃
Gate Open
VGD
dV/dt
≥0.25
≥1000
Mechanical Characteristics
Module size
Module thickness
Welding area of cathode electrode
Welding area of control electrode
12 mm×12 mm
1.6 mm
9 mm×9 mm
φ1.5mm
V
V/μs
AK
G
symbol
Working Conditions
1) No severe mechanical shock as impact and drop off in the process of transportation, storage and
working of product.
2) Storage conditions
Temperature: 5~40℃
Relative humidity: ≤45%
Storage time: 3 days for the open package; 3 months for the closed package
3) Welding conditions
Recommended solder component: Sn63Sb37 (or lead-free solder of liquid quadrant less than 240℃)
Recommended soldering conditions: shown in Table 1
4) Welding in the gate spot is recommended to be completed one-time by using fixture. If it is necessary
to use a soldering iron, the temperature of soldering iron is controlled within 280℃ and time is controlled
within 20s.
TEL:+86-513-83639777
- 2 / 3-
http://www.jjwdz.com
|