파트넘버.co.kr ADC08062 데이터시트 PDF


ADC08062 반도체 회로 부품 판매점

500 ns A/D Converter with S/H Function and Input Multiplexer



National Semiconductor 로고
National Semiconductor
ADC08062 데이터시트, 핀배열, 회로
June 1999
ADC08061/ADC08062
500 ns A/D Converter with S/H Function and Input
Multiplexer
General Description
Using a patented multi-step A/D conversion technique, the
8-bit ADC08061 and ADC08062 CMOS ADCs offer 500 ns
(typ) conversion time, internal sample-and-hold (S/H), and
dissipate only 125 mW of power. The ADC08062 has a
two-channel multiplexer. The ADC08061/2 family performs
an 8-bit conversion using a 2-bit voltage estimator that gen-
erates the 2 MSBs and two low-resolution (3-bit) flashes that
generate the 6 LSBs.
Input track-and-hold circuitry eliminates the need for an ex-
ternal sample-and-hold. The ADC08061/2 family performs
accurate conversions of full-scale input signals that have a
frequency range of DC to 300 kHz (full-power bandwidth)
without need of an external S/H.
The digital interface has been designed to ease connection
to microprocessors and allows the parts to be I/O or memory
mapped.
Key Specifications
n Resolution
n Conversion Time
n Full Power Bandwidth
n Throughput rate
n Power Dissipation
n Total Unadjusted Error
8 bits
560 ns max (WR-RD Mode)
300 kHz
1.5 MHz
100 mW max
±12 LSB and ±1 LSB
Features
n 1 or 2 input channels
n No external clock required
n Analog input voltage range from GND to V+
n Overflow output available for cascading (ADC08061)
n ADC08061 pin-compatible with the industry standard
ADC0820
Applications
n Mobile telecommunications
n Hard disk drives
n Instrumentation
n High-speed data acquisition systems
Block Diagram
* ADC08061
** ADC08062
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 1999 National Semiconductor Corporation DS011086
DS011086-1
www.national.com


ADC08062 데이터시트, 핀배열, 회로
Connection Diagrams
DS011086-14
Dual-In-Line and Wide-Body
Small-Outline
Packages N20A or M20B
Ordering Information
Industrial (−40˚C TA 85˚C)
ADC08061BIN, ADC08062BIN
ADC08061CIWM, ADC08062CIWM
Pin Description
VIN,
VIN1–8
DB0–DB7
These are analog inputs. The input range is
GND–50 mV VINPUT V+ + 50 mV. The
ADC08061 has a single input (VIN) and the
ADC08062 has a two-channel multiplexer
(VIN1–2).
TRI-STATE data outputs — bit 0 (LSB) through
bit 7 (MSB).
WR /RDY WR-RD Mode (Logic high applied to MODE pin)
WR: With CS low, the conversion is started on
the falling edge of WR. The digital result will be
strobed into the output latch at the end of con-
version (see Figures 2, 3, 4).
: RD Mode (Logic low applied to MODE pin)
RDY: This is an open drain output (no internal
pull-up device). RDY will go low after the falling
edge of CS and return high at the end of conver-
sion.
MODE
Mode: Mode (RD or WR-RD) selection
input — This pin is pulled to a logic low through
an internal 50 µA current sink when left uncon-
nected.
RD Mode is selected if the MODE pin is left un-
connected or externally forced low. A complete
conversion is accomplished by pulling RD low
until output data appears.
WR-RD Mode is selected when a high is applied
to the MODE pin. A conversion starts with the
WR signal’s rising edge and then using RD to
access the data.
RD WR-RD Mode (logic high on the MODE pin)
This is the active low Read input. With a logic
low applied to the CS pin, the TRI-STATE data
outputs (DB0–DB7) will be activated when RD
goes low (Figures 2, 3, 4).
RD Mode (logic low on the MODE pin)
INT
GND
VREF−,
VREF+
CS
OFL
NC
DS011086-15
Dual-In-Line and Wide-Body
Small-Outline
Packages N20A or M20B
Package
N20A
M20B
With CS low, a conversion starts on the falling
edge of RD. Output data appears on DB0–DB7
at the end of conversion(see Figures 1, 5).
This is an active low output that indicates that a
conversion is complete and the data is in the
output latch. INT is reset by the rising edge of
RD.
This is the power supply ground pin. The ground
pin should be connected to a “clean” ground ref-
erence point.
These are the reference voltage inputs. They
may be placed at any voltage between GND −
50 mV and V+ + 50 mV, but VREF+ must be
greater than VREF−. Ideally, an input voltage
equal to VREF− produces an output code of 0,
and an input voltage greater than VREF+ − 1.5
LSB produces an output code of 255.
For the ADC08062, an input voltage on any un-
selected input that exceeds V+ by more than
100 mV or is below GND by more than 100 mV
will create errors in a selected channel that is
operating within proper operating conditions.
This is the active low Chip Select input. A logic
low signal applied to this input pin enables the
RD and WR inputs. Internally, the CS signal is
ORed with RD and WR signals.
Overflow Output. If the analog input is higher
than VREF+ 12 LSB, OFL will be low at the end
of conversion. It can be used when cascading
two ADC08061s to achieve higher resolution (9
bits). This output is always active and does not
go into TRI-STATE as DB0–DB7 do. When OFL
is set, all data outputs remain high when the
ADC08061’s output data is read.
No connection.
www.national.com
2




PDF 파일 내의 페이지 : 총 16 페이지

제조업체: National Semiconductor

( national )

ADC08062 converter

데이터시트 다운로드
:

[ ADC08062.PDF ]

[ ADC08062 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


ADC0806

8-Bit/ 20 MSPS to 60 MSPS/ 1.3 mW/MSPS A/D Converter - National Semiconductor



ADC0806

500 ns A/D Converter with S/H Function and Input Multiplexer - National Semiconductor



ADC08060

8-Bit/ 20 MSPS to 60 MSPS/ 1.3 mW/MSPS A/D Converter - National Semiconductor



ADC08060

ADC08060 8Bit 20MSPS to 60MSPS 1.3 mW /MSPS A/D Conv w/ Inter Sample-and-Hold (Rev. H) - Texas Instruments



ADC08060CIMT

8-Bit/ 20 MSPS to 60 MSPS/ 1.3 mW/MSPS A/D Converter - National Semiconductor



ADC08061

500 ns A/D Converter with S/H Function and Input Multiplexer - National Semiconductor



ADC08061

ADC08061/ADC08062 500 ns A/D Converter with S/H Function and Input Multiplexer (Rev. D) - Texas Instruments



ADC08061BIN

500 ns A/D Converter with S/H Function and Input Multiplexer - National Semiconductor



ADC08061CIWM

500 ns A/D Converter with S/H Function and Input Multiplexer - National Semiconductor