파트넘버.co.kr IM2000 데이터시트 PDF


IM2000 반도체 회로 부품 판매점

HIGH PERFORMANCE MICROSTEPPING SETP MOTOR CONTROLLER



IMS 로고
IMS
IM2000 데이터시트, 핀배열, 회로
TTM
intelligent motion systems, inc.
Excellence in MotionTM
IM2000
HIGH PERFORMANCE MICROSTEPPING STEP MOTOR CONTROLLER
IM2000F - 80 PIN QFP
IM2000P - 68 PIN PLCCC
IM2000S - ULTRA SMALL 64 PIN QFP
OPERATING INSTRUCTIONS


IM2000 데이터시트, 핀배열, 회로
General Disclaimer
The information in this book has been carefully checked and is believed to be
accurate; however, no responsibility is assumed for inaccuracies.
Intelligent Motion Systems, Inc., reserves the right to make changes without
further notice to any products herein to improve reliability, function or design.
Intelligent Motion Systems, Inc., does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it
convey any license under its patent rights of others. Intelligent Motion Systems
and TM are trademarks of Intelligent Motion Systems, Inc.
Intelligent Motion Systems, Inc.’s general policy does not recommend the use
of its products in life support or aircraft applications wherein a failure or
malfunction of the product may directly threaten life or injury. Per Intelligent
Motion Systems, Inc.’s terms and conditions of sales, the user of Intelligent
Motion Systems, Inc., products in life support or aircraft applications assumes
all risks of such use and indemnifies Intelligent Motion Systems, Inc., against
all damages.
Twenty-Four Month Limited Warranty
Intelligent Motion Systems, Inc., warrants its products against defects in
materials and workmanship for a period of 24 months from receipt by the end-
user. During the warranty period, IMS will either, at its option, repair or
replace products which prove to be defective.
EXCLUSIONS
The above warranty shall not apply to defects resulting from: improper or
inadequate handling by customer; improper or inadequate customer wiring;
unauthorized modification or misuse; or operation outside of the electrical
and/or environmental specifications for the product.
OBTAINING WARRANTY SERVICE
To obtain warranty service, a returned material authorization number (RMA)
must be obtained from customer service at (860) 295-6102 before returning
product for service. Customer shall prepay shipping charges for products
returned to IMS for warranty service and IMS shall pay for return of products
to customer. However, customer shall pay all shipping charges, duties and
taxes for products returned to IMS from another country.
WARRANTY LIMITATIONS
IMS makes no other warranty, either expressed or implied, with respect to the
product. IMS specifically disclaims the implied warranties of merchantability
and fitness for a particular purpose. Some jurisdictions do not allow limitations
on how long an implied warranty lasts, so the above limitation or exclusion may
not apply to you. However, any implied warranty of merchantability or fitness is
limited to the 24-month duration of this written warranty.
EXCLUSIVE REMEDIES
If your product should fail during the warranty period, call customer service at
(860) 295-6102 to obtain a returned material authorization number (RMA)
before returning product for service. Please include a written description of
the problem along with contact name and address. Send failed product to:
Intelligent Motion Systems, Inc., 370 N. Main St. Marlborough, Connecticut
06447. Also enclose information regarding the circumstances prior to
product failure.
Contents
Section 1
Introduction to the IM2000
Section Overview ......................... 3
The IM2000 .................................. 3
Features And Benefits .................. 4
Block Diagram .............................. 4
Section 2
Hardware Specifications
Section Overview ......................... 5
Mechanical Specifications ............ 5
IM2000F - 80 Pin QFP ................... 5
IM2000P - 68 Pin PLCCC ............. 6
IM2000S - 64 Pin
Ultra-Small QFP .............................. 6
Electrical & Environmental
Specifications ................................ 7
IM2000 Pin Description ............... 8
Section 3
Operation of the IM2000
Section Overview ......................... 9
Protection Inputs ........................... 9
Microstep Select (MSEL) Inputs .. 10
Step/Direction Inputs .................... 10
Chip Select (CSEL) Input ............. 11
Full Step Output ............................ 11
Dual PWM .................................... 11
Recirculating ..................................... 11
Non-Recirculating ........................... 11
Fixed PWM Type ............................ 12
Power Control Outputs ................. 12
Current Control ............................. 13
Digital Current Control ................ 13
Automatic Current Reduction ..... 13
Example Application of the
Power Control Outputs ................ 13
Chopping Oscillator ...................... 14
Reset ............................................. 14
External Lookup Tables ............... 14
Buss/Stand-alone Mode ................ 15
Typical Application ...................... 16
2




PDF 파일 내의 페이지 : 총 16 페이지

제조업체: IMS

( ims )

IM2000 controller

데이터시트 다운로드
:

[ IM2000.PDF ]

[ IM2000 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


IM2000

HIGH PERFORMANCE MICROSTEPPING SETP MOTOR CONTROLLER - IMS



IM2000S

HIGH PERFORMANCE MICROSTEPPING STEP MOTOR CONTROLLER - ETC