|
|
PDF MN101C49 Data sheet ( Hoja de datos )
| Número de pieza | MN101C49 | |
| Descripción | Microcomputers / Controllers | |
| Fabricantes | Panasonic | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MN101C49 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
MN101C49G , MN101C49H , MN101C49K
Type
ROM (× 8-bit)
External memory can be expanded
RAM (× 8-bit)
External memory can be expanded
Package
Minimum Instruction
Execution Time
Interrupts
Timer Counter
MN101C49G
128 K
MN101C49H
160 K
MN101C49K
224 K
4 K 6 K 10 K
QFP100-P-1818B *Lead-free
Standard: 0.10 µs (at 4.5 V to 5.5 V, 20 MHz)
0.238 µs (at 2.7 V to 5.5 V, 8.39 MHz)
125 µs (at 2.0 V to 5.5 V, 32 kHz)*
Double speed: 0.12 µs (at 4.5 V to 5.5 V, 8.39 MHz)
0.25 µs (at 3.0 V to 5.5 V, 4 MHz)
62.5 µs (at 2.0 V to 5.5 V, 32 kHz)*
* The lower limit for operation guarantee for EPROM built-in type is 2.7 V.
* The lower limit for operation guarantee for flash memory built-in type is 4.5 V.
• RESET • Watchdog • External 0 • External 1 • External 2 • External 3 • External 4 • External 5 • Timer 0
• Timer 1 • Timer 2 • Timer 3 • Timer 4 • Timer 6 • Timer 7 (2 systems) • Time base • Serial 0 • Serial 1
• Serial 2 • Serial 3 • Automatic transfer finish • A/D conversion finish • Key interrupts (8 lines)
Timer counter 0 : 8-bit × 1
(square-wave/8-bit PWM output, event count, generation of remote control carrier, pulse width measurement)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1
(square-wave/8-bit PWM output, event count, synchronous output event, pulse width measurement)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 2
Timer counter 3 : 8-bit × 1 (square-wave output, event count, generation of remote control carrier)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 4 : 8-bit × 1
(square-wave/8-bit PWM output, event count, pulse width measurement, serial 1 baud rate timer)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; 1/1 of external clock
input frequency
Interrupt source ················ coincidence with compare register 4
Timer counter 6 : 8-bit freerun timer
Clock source ····················· 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock
frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency
Interrupt source ················ coincidence with compare register 6
MAD00011EEM
1 page  
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of
the products or technical information described in this material and controlled under the "Foreign Exchange
and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuits examples of the products. It neither warrants non-infringement of intellectual property right
or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical
information as described in this material.
(4) The products described in this material are intended to be used for standard applications or general electronic
equipment (such as office equipment, communications equipment, measuring instruments and household
appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion
equipment, life support systems and safety devices) in which exceptional quality and reliability are re-
quired, or if the failure or malfunction of the products may directly jeopardize life or harm the human body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without notice for
modification and/or improvement. At the final stage of your design, purchasing, or use of the products,
therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications
satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating,
the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be
liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of
break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as
redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physi-
cal injury, fire, social damages, for example, by using the products.
(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life
and amount of time let standing of unsealed items) agreed upon when specification sheets are individually
exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet MN101C49.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MN101C425 | (MN101C425 / MN101C427) Microcomputers/Controllers |  Panasonic Semiconductor |
| MN101C425 | MN101 Series microcontroller |  Matsushita Electric |
| MN101C427 | (MN101C425) Microcomputers/Controllers | Panasonic |
| MN101C427 | MN101 Series microcontroller | Matsushita Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |