|
Omron |
EE-2001/2002
NPN to PNP Conversion Connector for
Amplified Photomicrosensors
H Converts NPN output to PNP output by
easy connection to amplified
photomicrosensors
H Easy solution to achieve PNP output as
required in the U.S. and Europe
Ordering Information
Applicable amplified photomicrosensor models
EE-SPX301
EE-SPY302
EE-SPZ301Y-01
EE-SPX401
EE-SPY402
EE-SPZ401Y-01
EE-SPY301
EE-SPZ301-A EE-SPZ301W-01
EE-SPY401
EE-SPZ401-A EE-SPZ401W-01
EE-SX670/-A
EE-SX470
EE-SPY311
EE-SX671/-A
EE-SX471
EE-SPY312
EE-SX672/-A
EE-SX472
EE-SPY411
EE-SX673/-A
EE-SX473
EE-SPY412
EE-SPZ301W-02
EE-SPZ401W-02
EE-SPZ301
EE-SPZ401
EE-SY671
EE-SB5V/-E
EE-SY672
EE-SB5VC
EE-SPX303/403 EE-SB5M
EE-SPX311/411 EE-SB5MC
Part number
EE-2001
EE-2002
Specifications
Note: TA= 25° C (77°F), 65% RH
Item
Supply voltage*
Consumption current
Control output
Ambient temperature
Ambient humidity
Operating
Storage
Operating
Storage
Value
5 V to 24 VDC ±10%, ripple (p-p): 5% max.
5 mA max. under the following conditions:
Connector side: ¨=open, short circuit between IN and ©
Cord side: ¨=26.4V, OUT= open, © = 0 V
100 mA max. (Residual voltage = 0.8 V max.)
-10°C to 55°C (14°F to 131°F)
-25°C to 65°C (-13°F to 149°F)
5 to 85% RH
5 to 95% RH
*Use the indicated supply voltages for the specified products below:
Supply voltage
12 to 24 VDC ±10%, ripple (p-p): 5% max.
5 to 15 VDC ±10%, ripple (p-p): 5% max.
5 to 12 VDC ±10%, ripple (p-p): 5% max.
Part number
EE-SPX303, EE-SPX403
EE-SB5V/-E, EE-SB5VC
EE-SB5M, EE-SB5MC
EE-2001/2002
Operation
J WIRING DIAGRAM
Connector Side
+
NPN output type
Built-in Amplifier
Photomicrosensor
IN
--
Main
Circuit
Cord Side
+
5 VDC to 24 VDC
OUT
Load
--
0V
Dimensions
Unit: mm (inch)
J EE-2001
11.8 (0.46)
5.3 (0.21)
16.2 (0.64)
20 ±10
1
2
3
200 ±30
40 (1.57)
EE-2001/2002
200 ±30
8
∅4.0
∅8
12
(0.47)
2
|