|
JST |
XH CONNECTOR
Emboss Tape Radial Tape
2.5mm pitch/Disconnectable Crimp style connectors
5
JST
The XH connector was developed based
on the high reliability and versatility of our
NH series connectors. The connector is very
small with a mounting height of 9.8mm.
• Original folded beam contact
• Box-shaped shrouded header
• Header with a boss
• Interchangeability
• Conforming to the HA terminal
Specifications –––––––––––––––––––
• Current rating: 3A AC, DC (AWG #22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10m Ω max.
After environmental testing/ 20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire: AWG #30 to #22
• Applicable PC board thickness: 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812
2 J50014297
Through-hole type (viewed from soldening side)
Top entry type
Side entry type
2 circuits
3 to 20 circuits
Top entry type with a boss
(1 circuit)
(2 circuits or more)
2 circuits
3 to 20 circuits
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions
should be larger. The dimensions above should serve as a guideline. Contact JST for details.
SMT type (viewed from component side)
Side entry type
End face of wafer on the mating side
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
1
Free Datasheet http://www.datasheet-pdf.com/
Contact
Shape A
Shape B
SXH-001T-P0.6N
SXH-001T-P0.6
Note: *Strip-crimp applicator
Housing
Circuit No.1 mark
Plugged up
(2 circuits 10.0mm pitch)
Circuit No.1 mark
(6 circuits 5.0mm pitch)
Circuit No.1 mark
XH CONNECTOR
Model No. Shape
SXH-001T-P0.6N
SXH-001T-P0.6
SXH-002T-P0.6
Applicable Wire
Insulation O.D Q'ty /
(mm)
reel
Material and Finish
Phosphor bronze, tin-plated (reflow treatment)
RoHS compliance
Note:
1. Contact JST if you require gold-plated contacts or contacts made of brass.
2. Contact JST also if you require shielded wires, thin wires or other
special wires.
3. SXH-001T-P0.6N is low-insertion force type contact, for easier insertion/
withdrawal, which would be less resistant to the vibration.
SXH-002T-P0.6
Circuits
Model No.
XHP-1
XHP-2
XHP-2(10.0)-U
XHP-3
XHP-4
XHP-5
XHP-6
XHP-6(5.0)-U
XHP-7
XHP-8
XHP-9
XHP-10
XHP-11
XHP-12
XHP-13
XHP-14
XHP-15
XHP-16
XHP-20
Dimensions (mm)
Q'ty / bag
Material
PA 6, UL94V-0, natural (white)
RoHS compliance
Note:
1. XHP-2(10.0)-U is 2 circuits 10.0mm pitch plugged up.
Not UL/CSA/TU¨ V approved.
2. XHP-6(5.0)-U is 6 circuits 5.0mm pitch plugged up.
Not UL/CSA/TU¨ V approved.
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. XHP-1-oo-
(blank)…natural (white)
BK…black R…red E…blue Y…yellow L…lemon yellow
M…green D…orange N…brown FY…vivid yellow
<Plugged up type>
ex. XHP-2(10.0)-U-oo-
(blank)…natural (white)
R…red E…blue
2
Free Datasheet http://www.datasheet-pdf.com/
|