파트넘버.co.kr SM02B-PASS-* 데이터시트 PDF


SM02B-PASS-* 반도체 회로 부품 판매점

CONNECTOR



JST 로고
JST
SM02B-PASS-* 데이터시트, 핀배열, 회로
2.0mm
(.079") pitch
PA FAMILY SERIES/PA•PAF•PAL CONNECTOR
Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC)
Features ––––––––––––––––––––––––
• Secure locking device
The housing has a locking device to prevent accidental
disconnection because of routing of wires or of vibration, and
also reverse and different circuit numbers mating.
• Interchangeable between crimp and IDC socket
Both crimp and IDC sockets use the same headers and wire-to-
wire mating halves.
• Secondary retainers
Secondary retainers enhance safety in case of partial insertion
or accidental release of the contact.
• Harness variation
PAL, wire-to-wire crimp style connector, increases wire harness variation.
Based upon wire-to-board crimp style PA
connectors, the PA series family of
connector have been expanded to meet the
requirement of complex wire harness of
2.0mm (.079") pitch connectors with secure
locking mechanism thanks to the
additional line up of wire-to-board IDC style
PAF connectors and wire-to-wire crimp
style PAL connectors.
Retainer
PAF Receptacle
(IDC style)
PA Shorouded header
(Top entry type)
Retainer
Retainer
PA Receptacle
(Crimp style Standard type)
PA Receptacle
(Crimp style Retainer mountable type)
PAF Receptacle
(IDC style)
PAL
(Crimp style Wire-to-wire)
PA Shorouded header
(Side entry type)
PA Shorouded header
(Top entry type)
Retainer
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812
PA connector
(Standard type, Retainer mountable type)
• Highly reliable contact
The box contact supplies stable contact performance even under
conditions of vibration, distortion, low voltage or low current.
• Insertion guide mechanism
Header has housing insertion guides for easy and secure insertion.
• Flanged press pin
Top entry type header has flanged press pins, preventing
accidental removal of the pins that might result from the
distorted unmating especially in the case of small No. of circuits.
PAF connector
• The industry’s first secure lock IDC connectors
By separating ID section and secure lock section, the industrys first
secure lock specification has been achieved for IDC that was said
to be impossible. Our fully automatic IDC machines, BCD-M5BP
(for simple harness) and CAM-M12B, SAD-M12E (for multi-
harness), can be applied for harness making.
• Metallic strain relief
Metallic strain relief on the contact securely grips wire insulation that
can avoid direct stress of vibration or impact. The same grip strength
as insulation barrel of crimp style contact could be achieved.
• Retainer with four locking points
The new four locking points design ensures wire retention force
of every direction that is almost superior to contact retention
force of crimp style connectors. It also completely covers
exposed terminated ID contact.
PAL connector
• The industry’s first wire to wire 2.0mm (.079")
pitch retainer mountable type connector.
• Either with or without panel lock can be
selected according to application.
61
www.DataSheet.in


SM02B-PASS-* 데이터시트, 핀배열, 회로
PA FAMILY SERIES /PAPAFPAL CONNECTOR
List of combinations ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Crimp style
Standard type
Contact
SPHD-001T-P0.5
SPHD-002T-P0.5
Housing
PAP-( )V-S
Shrouded header
Top entry type
Side entry type
Shrouded header
High box type
Crimp style
Retainer mountable type
Contact
SPA-001T-P0.5
Housing
PARP-( )V
Retainer
PMS-( )V-S
Shrouded header
SMT type
Top entry type
Side entry type
Insulation displacement type
Receptacle
( )PAF-6S
Retainer
PAFS-( )V-S
Contact
Wire to wire Connectors
Receptacle housing
Retainer
Specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
PA Connector (Standard type)
PAF Connector
Current rating: 3A AC, DC (AWG#22)
Voltage rating: 250V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
Contact resistance: Initial value/10m max.
After environmental testing/20m max.
Insulation resistance: 1,000M min.
Withstanding voltage: 800V AC/minute
Applicable wire: AWG #28 to #22
Applicable PC board thickness: 1.6mm(.063")
PA Connector (Retainer mountable type)
Current rating: 1.0A AC, DC (AWG#26)
Voltage rating: 100V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
Contact resistance: Initial value/15m max.
After environmental testing/25m max.
Insulation resistance: 1,000M min.
Withstanding voltage: 800V AC/minute
Applicable wire: UL1061(Contact JST for details regarding other UL wires.)
AWG #26
Conductor/7 strands, tin-coated annealed copper
Insulation O.D./0.9 to 1.0mm(.035" to .039")
Current rating: 3A AC, DC (AWG#22)
Voltage rating: 100V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
Contact resistance: Initial value/15m max.
After environmental testing/25m max.
Insulation resistance: 1,000M min.
Withstanding voltage: 800V AC/minute
Applicable wire: AWG #28 to #22
62
PAL Connector
Current rating: 3A AC, DC (AWG#22)
Voltage rating: 100V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
Contact resistance: Initial value/15m max.
After environmental testing/25m max.
Insulation resistance: 1,000M min.
Withstanding voltage: 800V AC/minute
Applicable wire: AWG #28 to #22
Applicable panel thickness : 0.5 to 2.0mm(.020" to .079")
www.DataSheet.in




PDF 파일 내의 페이지 : 총 15 페이지

제조업체: JST

( jst )

SM02B-PASS-* connector

데이터시트 다운로드
:

[ SM02B-PASS-*.PDF ]

[ SM02B-PASS-* 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


SM02B-PASS-*

CONNECTOR - JST



SM02B-PASS-1-*

CONNECTOR - JST