|
|
Número de pieza | PO51M-P-1.5W | |
Descripción | 2mm Hard Metric Coaxial Connector | |
Fabricantes | Hirose Electric | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de PO51M-P-1.5W (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! NEW
2mm Hard Metric Coaxial Connector
PO21M, PO51M, PO82M Series
(IEC 61076-4-101 Compliant)
sSummary
P021M, PO51M, and P082M connector series are a plug-in type
coaxial contact and an applicable housing case compliant with the
2mm hard metric standard (IEC 61076-4-101).
PO21M series: Housing
PO51M series: 50ø coaxial contact
PO82M series: 75ø coaxial contact
Photo 1
Mounted on the same board as the 2mm
hard metric connector
sFeatures
1. Profile complies with 2mm hard metric
This connector can be mounted on the same board as the hard
metric connector. (Refer to Photos 1 and 2.) It uses Compact-PCI
designated key options to identify a 3.3V or 5V system.
(Hirose’s MU optical fiber series can also be mounted on the same
board as the 2mm electric system connector. Refer to Photo 1)
2. Flexible Design allows for various terminations
The housing (P021M series) allows for both cable mount as well
as board mounted connectors. The back plane side allows both a
50ø and a 75ø straight jack as well as a right angle 50ø jack.
The daughter card side allows both a 50ø and a 75ø straight
plug as well as a right angle 50ø board mounted jack.
3. 50ø type and 75ø type
Hirose’s unique technology assures that the high frequency
characteristics of the 50ø impedance type (P051M) and 75ø
impedance type (P082M) are consistent between the fully
mated position and a mated position with a 1mm gap.
Note: The P082M connector opening is designed in the HRS original
form in order to enhance high frequency characteristics.
q50 ø type (PO51M series)
q75 ø type (PO82M series)
Photo 2
sApplications
q Base Station
q Digital and Analog Switch Equipment
q Digital Broadcasting Equipment
q Test & Measurement Equipment
q Factory Control & Automation Equipment
2001.6
1
1 page sBackplane Cable Side: Coaxial 6-contact housing
0.55
7.5
49.95
7.5 6.25 6.25 7.5
7.5
0.4
B 3.75 3.75
3.75 3.75
B
A
3.5
A
AA
(PO21M-6S-PA)
AA
(PO21M-6S-PA-S)
Ø5.1
M2.5
BRecommended PCB Layout (Component Side)
7.5 7.5 6.25 6.25 7.5 7.5 11(N-oØt62p+l-a0Øt(eN.006do5.tth1pr+loa0uteg.0d1h)through)
Note 1 The board hole pitch tolerance should be ±0.05mm.
2 The 4-Ø2.6 hole is needed to use and fix this product
on the board by screws.
3.75 3.75
3.75
3.75
(N4o-tØpl2at.e6d
Connector
0+0.1
through) 2
center
line
Product No.
HRS No.
Remark
PO21M-6S-PA
CL330-0300-0
Compliant to IEC = Style L
PO21M-6S-PA-S
CL330-0301-3
Nut insert product for mounting board
* The above pattern shows a layout for PO21M-6S-PA.
PO21M-6-PA-S needs 2 screws (M2.5) to be inserted in area #2 as shown above.
*
5
5 Page 11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet PO51M-P-1.5W.PDF ] |
Número de pieza | Descripción | Fabricantes |
PO51M-P-1.5 | 2mm Hard Metric Coaxial Connector | Hirose Electric |
PO51M-P-1.5W | 2mm Hard Metric Coaxial Connector | Hirose Electric |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |