|
Hirose Electric |
NEW
Power Supply Connectors For Industrial Equipment
PX Series
Structure prevents mis-insertion
Key
sFeatures
1. Power supply connector for high-current:
Withstands voltage of 2200V AC max. and 10A/contact
(60A/6contacts) of rated current.
2. Housing design prevents incorrect insertion:
Opening section is designed to prevent reverse insertion and
mating direction is easily checked.
Additionally, the opening section is keyed to prevent
misalignment of plugs in parallel applications. (See the right
Pict.➀.)
3. Reduced Size:
When compared to traditional products, Hirose’s plug is
smaller in size by 65% and the receptacle is smaller by 55%.
(For more details, refer to page 2.)
4. Reliable contact structure:
➀Three point contact
➁Gold plated contacts (standard) with high-level environmental
resistance
➂Contact spring guard structure
➃Structure prevents retainer deformation (Refer to the right
Fig.➀.)
5. Easy Cable Assembly:
➀Use of dedicated crimping tools will make harness work
easier.One tool crimps both AWG#16 and AWG#18 wire.
➁Positive lock can be felt on contact insertion.
➂Release of contact lock can easily be performed with
dedicated jig, which facilitates the wiring modification after
assembly.
Pict.-➀
Shape of opening prevents reverse insertion
Reliable terminal structure
retainer
Sealing section
(3 contacts)
Contact spring
guard section
Fig.-➀
As this window is opened, contact
section can easily be checked.
Wall structure prevents
retainer deformation
16-18
Applicable Wire Size (AWG No.)
Since the retainer portion is lowered
by onestep, the possibility of spring
deformation is minimized even if the
lock is released.
Avoid any
short between
adjacent
terminals
Two layer structure
enables high-density
mounting.
Label space
99.4 1
sProduct Specifications
Ratings
Temp. Range
Voltage
Current
-55ç~+105ç
AC600V
10A
Description
1.contact resistance
2.insulation resistance
3.voltage resistance
4.Insertion/Withdrawal
life
5.vibration resistance
6.shock resistance
Specifications
10mø maximum
1000Mø minimum
No flashover/dielectric breakdown
➀Contact resistance : 20mø or less
➁No damage, cracks or looseness of parts
➀No instantaneous electric disconnection of
10 µs or more
➁Contact resistance : 20møor less
➂No damage, cracks or looseness of parts
7.temperature cycle
➀Contact resistance : 20mø or less
➁Insulation resistance : 1000Mø or more
➂No damage, cracks or looseness of parts
8.humidity resistance
in steady state
9.Corrosion, salt mist
➀Contact resistance : 20mø or less
➁Insulation resistance : 1000Mø or more
➂No damage, cracks or looseness of parts
➀No heavy corrosion
Requirements
Measured at 100mA.
Measured at DC 500V.
AC 2200V for 1 minute.
1000 times of insertion/withdrawal
Frequency:10-55Hz(1cycle,5 min.) One-sided
amplitude:Test at 0.75mm, 3 directions for 2 hours, respectively
Acceleration: 490m/S2 Duration: 11ms
Test at sine half-wave, 3 axes, bi-directional three times, respectively.
Test the followings for 5 cycles :
Temperature : -55/+05~+35/+85/+05~+35ç
Time : -30/+10~+15/+30/+10~15Minutes
Continuous condition of 40±2ç in temperature and
90~95% in humidity for 96 hours.
Leave in 5% of salt water for 48 hours.
sMaterial Quality/Processing
Parts
Contacts
Insulator
Metal fixture
Material
Copper alloy
PBT resin(UL94V-0)
Copper alloy
Finish
Gold plating
Solder plating
BComparison In Size With Conventional Equivalent
(mm)
PX A company-made
Width
34.2
44.94
Plug
Height
07.0
07.15
Depth
23.0
22.80
Width
28.0
39.40
Receptacle
Height
14.8
18.47
Depth
27.4
27.18
For volume ratio, plug is downsized to : nearly 65%; and
receptacle : nearly 55%.
Plug
width
AF
Receptacle
width
7
R
S
1
F
F
12
A
A
6
2
|