파트넘버.co.kr FH12F-06S-0.5SH 데이터시트 PDF


FH12F-06S-0.5SH 반도체 회로 부품 판매점

0.5mm and 1mm Pitch Connectors For FPC/FFC



Hirose Electric 로고
Hirose Electric
FH12F-06S-0.5SH 데이터시트, 핀배열, 회로
0.5mm and 1mm Pitch Connectors For FPC/FFC
FH12 Series
Flip-lock
sFeatures
1. Ease of Use and Space Savings
Only one finger or 6.9N (Newtons) of force is required to
lock Hirose’s rotational actuator (flip-lock) as compared
to using 2 fingers and 39.2N to close a FFC/FPC
connector from our competition.
The Flip-Lock design also allows customers to place 2
or more connectors side by side as there is no need to
waste additional board space for a side latch.
2. Strengthened Flip-lock Actuator
The standard Flip-Lock requires only 2.0mm height
above the board. A strengthened lock lever is available
which only requires an additional 0.4mm.
3. Supports Thin FPC (0.18mm)
Hirose does not require double-sided FPC to have any
additional strengthening plate or stiffener and can therefore
support a thickness of as little as 0.18mm +/- 0.05.
4. Hirose Ensures Reliability
Hirose’s patented half tuning fork contacts maintain the
required normal force without relying on the connector
housing. With our competitor’s conventional products
the housing walls support the contact force, which does
not provide for long-term reliability.
5. Prevention of Solder Bridge
Excess solder cavity absorbs excessive solder and
avoids solder bridging.
6. Three different assembly types
FH12 is offered in Top & Bottom Contact and Vertical
Mount and offered in both a 0.5mm contact pitch as well
as a 1.0mm contact pitch (bottom contact only).
sApplications
Notebook computers, printers, PDAs, digital cameras and
other compact devices for interconnecting the main circuit
board with the LCD, HDD or other device.
Rotating One-touch Mechanism
q
w
e
6


FH12F-06S-0.5SH 데이터시트, 핀배열, 회로
sProduct Specifications
Rating
Current rating: 0.4A DC Operating Temperature Range:_40 to +70ç (Note 1) Storage Temperature Range:_10 to +50ç (Note 2)
Voltage rating: 50V AC Operating Humidity Range:Relative humidity, 90% max. Storage Humidity Range:Relative humidity, 90% max.
(Not dewed)
(Not dewed)
Applicable FPC
t=0.3±0.05 Tin-lead plating(Note 3) t=0.18 ± 0.05 for FH12F-*S-0.5SH
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
Specification
500M ohms minimum
No flashover or insulation breakdown.
50m ohms maximum
100V DC
150V AC/1 minute
1mA
Conditions
4. Durability (Insertion/withdrawal)
Contact resistance: 50m ohms maximum
No damage, cracks, or parts dislocation.
20 cycles
5. Vibration
No electrical discontinuity of 1µs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 directions.
6. Shock
No electrical discontinuity of 1µs or more
Contact resistance: 50m ohms maximum.
No damage, cracks, or parts dislocation.
Acceleration of 490 m/s2, 11 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis.
Contact resistance: 50m ohms maximum.
7. Humidity(Steady state) Insulation resistance: 50M ohms minimum.
No damage, cracks, or parts dislocation.
96 hours at temperature of 40ç and humidity of 90% to 95%
8. Temperature Cycle
Contact resistance: 50m ohms maximum.
Insulation resistance: 50M ohms minimum.
No damage, cracks, or parts dislocation.
5 cycles under conditions as follows;
Temperature: -40ç / 15 to 35ç / 85ç / 15 to 35ç,
Time: 30 / 5 max. / 30 / 5 max.(minutes)
9.Resistance to Soldering heat No deformation of
components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 350±5ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation.
Note 3: When FPC is gold plated, the connector contacts should be also gold plated: Select the (05) specification.
sMaterial
Part
Insulator
Contact
Macal Fittings
Material
Polyamide
PPS
Phosphor bronze
Brass
Finish
Color : Beige
Color : Dark brown
Tin-lead plating
Tin-lead plating
Remarks
UL94V-0
–––––––
sOrdering Information
FH12 A - 10 (4) - S A - 0.5 SH (05)
q
w
er
ty
ui o
q Series Name : FH12
t Contact alignment: Single
w Blank : standard type
y Eccentric direction:
A : Top contact type
Blank : standard type
S : Type with strengthed flip-lock actuator
A : Eccentric type
F : Type with 0.18mm FPC End Thickness
u Contacts Pitch : 0.5mm, 1mm
e Standard type : Number of contacts
i Contact type
Eccentric type : Number of contacts in 0.5mm housing SH : SMT horizontal mounting type
r Standard type : Blank
SV : SMT vertical mounting type
Eccentric type : Number of contacts
o Plating specification
Blank : Tin-lead plating
(05) : Gold plating
7




PDF 파일 내의 페이지 : 총 19 페이지

제조업체: Hirose Electric

( hirose )

FH12F-06S-0.5SH connector

데이터시트 다운로드
:

[ FH12F-06S-0.5SH.PDF ]

[ FH12F-06S-0.5SH 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


FH12F-06S-0.5SH

0.5mm and 1mm Pitch Connectors For FPC/FFC - Hirose Electric