|
Hirose Electric |
NEW
Memory Stick® Connectors
CB1 Series
Card Push Insert/Push Eject
<CB1G Series>
sOutline
Receptacle connectors for use with the new generation of
digital media devices requiring “Memory Stick®” type of
consumer removable memory card.
Several variations are available: Miniature, Low Profile and
with or without ejection mechanism.
sFeatures
1. Indication of Incorrect Card Insertion
The connector will not allow the card to be complete
inserted from the wrong end or reversed.
The card will stop about 7mm before complete insertion
position, visually indicating incorrect insertion.
2. Protection of the Contacts
Incorrect insertion of the card will not damage the
contacts. The card can be easily withdrawn and re-
inserted correctly.
3. Excellent Card Handling
The type that is equipped with an ejection mechanism
provides a long ejection of the card which offers excellent
card handling qualities.
*Memory Stick is a registered trademark of the Sony Corporation.
q Card ejection distance of 10 mm
q Mounting height of 3.5 mm
q Mounting area: Smaller design is 78% of former
size
Button Touch Ejection
<CB1F Series>
q Card ejection with tactile button operation
q Card ejection distance of 10 mm
q Equipped with card ejection switch
Without Card Ejection
<CB1D Series>
q Miniaturized, low profile design
q Improved installation to the equipment is permitted
using (M1.7) tapping screws
q Can be equipped with an ejection mechanism
depending on the design of the equipment side
portion
Note: Please position the card ejection button at the side of the equipment.
2003.12
1
sProduct Specifications
Rating
Current rating 0.5A
Voltage rating 125V AC
Operating temperature range -20ç to +85ç(Note)
Storage temperature range -40ç to +85ç
Operating humidity range
Relative humidity 96% max.
(No condensation)
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Vibration
5. Humidity
Specification
1000 M ohms min.
No flashover or insulation breakdown
100 m ohms max.
No electrical discontinuity of 1 µs or more
Contact resistance: 40 m ohms max. from initial value
Insulation resistance: 100 M ohms min.
Conditions
500 V DC
500 V AC / one minute
100mA DC
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours / 3 axis
96 hours at temperature of 40ç±2ç and humidity
of 90% to 95%
6. Temperature cycle
Contact resistance: 40 m ohms max. from initial value
Insulation resistance: 100 M ohms min.
Temperature: -55ç/+5ç to +35ç/+85ç/+5ç to +35ç
Duration: 30/5/30/5(Minutes)
5 cycles
7. Durability
(mating/unmating)
Contact resistance: 40m ohms max. from initial value 12000 cycles at 400 to 600 cycles per hour
8. Resistance to
soldering heat
No deformation of any component.
No affect on contacts
Note :Includes temperature rise caused by current flow.
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
sMaterials
Part
Insulator
Contacts
Metal hold down
Cover
Eject mechanism components
Material
Finish
Remarks
Heat resistant glass reinforced
therm oplastic compound
Color: Black
UL94V-0
Phosphor bronze
Phosphor bronze or stainless steel
Contact area: Gold plated
Termination area: Tin-Iead plated or
tinned copper plated
Contact area: Nickel plating
Termination area: Tin-Iead plated or
tinned copper plated
----------
CB1E,CB1F,CB1G Series is
without the termination area.
Stainless steel or cupper alloy
----------
The CB1E Series has termination
area with tin-lead plated.
Stainless steel
Heat resistant glass reinforced
therm oplastic compound
----------
UL94V-0
sOrdering information
CB 1 E - 10 S - 1.5 H - PEJC - *
1 23
45
67
8
9
1 Series name : CB
2 Series No.
:1
3 Ejector type
}: C
E
F With eject mechanism
G
}D
A Without eject mechanism
4 Number of contacts : 10
5 Connector type S : Receptacle
6 Contact pitch : 1.5 mm
7 Surface mount
8 Eject mechanism codes:
PEJC : Card Push insert/Push eject
EJL : Left button eject
EJR : Right button eject
9 Suffix
2
|