파트넘버.co.kr 0603X7R333K10V 데이터시트 PDF


0603X7R333K10V 반도체 회로 부품 판매점

Multilayer Capacitors



Synton-Tech 로고
Synton-Tech
0603X7R333K10V 데이터시트, 핀배열, 회로
www.DataSheet4U.com
SYNTON-TECH CORPORATION
MULTILAYER CERAMIC CAPACITOR
File No.:
Version:
Page:
Date:
1. SUBJECT : This specification applies on the chip capacitor made by
SYNTON-TECH’s Corporation
2. PART NUMBER : Part number of the chip capacitor is identified by the
size,dielectric, capacitance value,tolerance, voltage
CC-02-D
A
1
2006.09.01
Example : DESCRIPTION : 0603 NPO 100PF 50V J
SYNTON CODE : 0603 NPO 101 J 50V
SIZE
0402
0603
0805
1206
1210
1808
1812
2220
DIELECTRIC
NPO
X7R
Y5V
Z5U
CAPACITANCE
VALUE
3 Digits :
5R1 : 5.1PF
100 : 10PF
101 : 100PF
102 : 1NF
103 : 10NF
104 : 0.1UF
105 : 1UF
TOLERANCE
10PF and below
A: ±0.05PF
B : ±0.10PF
C : ±0.25PF
D : ±0.5PF
More than 10pF
F : ±1%
G : ±2%
J : ±5%
K : ±10%
M : ±20%
Z : -20~+80%
VOLTAGE
6.3V
10V
16V
25V
50V
100V
200V
250V
500V
1KV
2KV
3KV
4KV
APPROVED
Carol
CHECKED
May
DESIGNED
REMARK
Chen
9/11:SGS
DOCUMENT NO.
0201010200
Confidential, Do Not Disseminate.


0603X7R333K10V 데이터시트, 핀배열, 회로
www.DataSheet4U.com
SYNTON-TECH CORPORATION
MULTILAYER CERAMIC CAPACITOR
File No.:
Version:
Page:
Date:
CC-02-D
A
2
2006.09.01
3. CAPACITOR CLASSIFICATION
Multi-layer ceramic capacitors are available in wide range of characteristics.
Electronic Industries Association (EIA) and the military have established
categories to help divide the basic characteristics into more easily specified
classes. The basic industry specification for ceramic capacitor is EIA
specification RS-198 and as noted in the general section, it specifies
temperature-compensating capacitors as class I capacitors. These are
specified by the military under specification MIL-C-20. General-purpose
capacitors with non-linear temperature coefficients are called Class II capacitors
by EIA and specified by military under MIL-C-11015 and MIL-C-39014.
The new high reliability military specification, MIL-C-123 covers both class
I and class II dielectrics.
Class I — Class I capacitors or temperature-compensating capacitors are usually
made from mixtures of titanates where barium titanate is normally not a major
part of mix. They have predictable temperature coefficients and in general,
do not have an aging characteristic. Thus they are the most stable capacitor
available. Normally the T.C.s of Class I temperature-compensating capacitors
are NP0 ( 30 ppm/ ).
Class II — General-purpose ceramic capacitors are called Class II capacitors
and have become extremely popular because of the high capacitance values
available in very small size. These capacitors are ferroelectrics and vary in
capacitance value under the influence of the environmental and electrical
operating conditions. Class II capacitors are affected by temperature voltage
frequency and time. Temperature effects for Class II ceramic capacitors are
exhibited as non-linear capacitance changes with temperature. Industry standards
for Mid-K dielectrics, such as X7R and High-K dielectrics, such as Z5U and Y5V
are defined as Class II formulations.
Confidential, Do Not Disseminate.




PDF 파일 내의 페이지 : 총 27 페이지

제조업체: Synton-Tech

( synton )

0603X7R333K10V capacitor

데이터시트 다운로드
:

[ 0603X7R333K10V.PDF ]

[ 0603X7R333K10V 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


0603X7R333K10V

Multilayer Capacitors - Synton-Tech