파트넘버.co.kr ST100-125T3MI 데이터시트 PDF


ST100-125T3MI 반도체 회로 부품 판매점

Wet Tantalum Capacitors



Vishay 로고
Vishay
ST100-125T3MI 데이터시트, 핀배열, 회로
www.vishay.com
ST
Vishay
SuperTan® Wet Tantalum Capacitors
with Hermetic Seal
Vishay ST represents a major breakthrough in wet tantalum
capacitor technology. Its unique cathode system provides
the highest capacitance per unit volume. The design
facilitates a doubling of capacitance, lower ESR and higher
ripple current rating compared with conventional wet
tantalum products. Moreover, the ST has the capacitance
stability of a solid tantalum capacitor and there are no circuit
impedance restrictions.
The ST is housed in an all tantalum, hermetically sealed case
and is manufactured to withstand hazardous environments.
The ST is used widely in the defense and aerospace
industries and whenever there is a space problem.
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
Capacitance Tolerance: at 120 Hz, +25 °C.
± 20 % standard. ± 10 % available as special.
FEATURES
• Very high capacitance
• 10 μF to 1800 μF
• 25 VDC to 125 VDC
• Very low ESR
• High ripple current
• All tantalum case
• Hermetically sealed
• Low DCL
Available
Available
• Axial through-hole terminations: standard tin / lead (Sn / Pb),
100 % tin (RoHS-compliant) available
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATION NOTES
a. No continuous reverse voltage permissible.
b. The peak of the applied AC ripple and the applied DC
voltage must not exceed the DC voltage rating of the
capacitor.
c. Ripple current ratings by part number at 85 °C and
40 kHz are included in the table. Ripple current correction
factors for other temperatures and frequencies are given
on the next page.
d. Transient reverse voltage surges are acceptable under
the following conditions:
the peak reverse voltage does not exceed 1.5 V and the
peak current times the duration of the reverse transient
does not exceed 0.05 As. In addition, the repetition
frequency of the reverse voltage surge is less than 10 Hz.
DIMENSIONS in inches [millimeters]
Terminal welded
to case
0.250 [6.35]
MAX.
0.0253 ± 0.002 [0.64 ± 0.05] dia.
(no. 22 AWG) tinned nickel leads
solderable and weldable
0.094 [2.38]
MAX.
E
L1
E
CASE CODE
D ± 0.016 [0.41]
MAX. INSULATED
(DIA.)
T1 0.188 [4.78] 0.219 [5.56]
T2 0.281 [7.14] 0.312 [7.92]
L2 0.281 [7.14] 0.312 [7.92]
T3
0.375 [9.52]
0.406 [10.31]
T4
0.375 [9.52]
0.406 [10.31]
Notes
• Material at egress is Tantalum
• Insulation sleeving will lap over the ends of the capacitor case
“D” DIA.
L1 + 0.031 / - 0.016 [+ 0.79 / - 0.41]
UNINSULATED
0.453 [11.51]
0.641 [16.28]
1.008 [25.60]
0.766 [19.46]
1.062 [26.97]
Terminal location
within 0.031 of center
E ± 0.250 [6.3] MAX.
1.500 [38.10]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
2.250 [57.15]
• Approx. weight:
T1: 2.3 g, T2: 5.7 g,
T3: 9.4 g, T4: 14.8 g
Revision: 06-Jul-15
1 Document Number: 43000
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


ST100-125T3MI 데이터시트, 핀배열, 회로
www.vishay.com
ST
Vishay
ORDERING INFORMATION
ST 220 100
Super Tan®
COMMERCIAL
CAP. TYPE
CAPACITANCE
μF
85 °C RATED
DC VOLTAGE
T4
CASE CODE
M
CAPACITANCE
TOLERANCE
I
INSULATING
SLEEVE
E3
RoHS-compliant
M = ± 20 %
K = ± 10 %
I = insulated
X = uninsulated
E3 = 100 % tin termination
(RoHS compliant)
Blank = SnPb termination
(standard design)
STANDARD RATINGS
CAPACITANCE
AT 25 °C
AND 120 Hz
(μF)
CASE
CODE
MAX.
ESR
120 Hz
(Ω)
MAX. DCL AT
+25 °C
(μA)
+85 °C /
+125 °C
(μA)
MAX. IMP.
AT -55 °C
AND 120 Hz
(Ω)
MAX. CAPACITANCE
CHANGE AT
-55 °C +85 °C +125 °C
(%) (%) (%)
AC RIPPLE
85 °C
40 kHz
(mA)
RMS
PART NUMBER
25 VDC AT 85 °C; 15 VDC AT 125 °C
120
T1 1.3
1
5
25
-42 +8 +12
1250
ST120-25T1MI
560
T2 0.83
2
10
12
-65 +10 +15
2100
ST560-25T2MI
1100
L2 0.5
3
25
7
-60 +20 +45
3200
ST1100-25L2MI
1200
T3 0.65
5
20
7
-70 +12 +18
2600
ST1200-25T3MI
1800
T4 0.5
6
25
7
-72 +12 +20
3100
ST1800-25T4MI
30 VDC AT 85 °C; 20 VDC AT 125 °C
100
T1 1.3
1
5
25
-38 +8 +12
1200
ST100-30TMI
470
T2 0.85
2
10
15
-65 +10 +18
1800
ST470-30T2MI
950
L2 0.5
5
30
7
-55 +18 +35
3200
ST950-30L2MI
1000
T3 0.7
7
25
7
-70 +10 +18
2500
ST1000-30T3MI
1500
T4 0.6 12
35
6
-72 +10 +20
3000
ST1500-30T4MI
50 VDC AT 85 °C; 30 VDC AT 125 °C
68
T1 1.5
1
5
35
-25 +8 +15
1050
ST68-50T1MI
220
T2 0.9
2
10
17.5
-50 +8 +15
1800
ST220-50T2MI
450
L2 0.6
3
25
7.5
-45 +12 +30
2900
ST450-50L2MI
470
T3 0.75
3
25
10
-45 +8 +15
2100
ST470-50T3MI
680
T4 0.7
5
40
8
-58 +10 +20
2750
ST680-50T4MI
60 VDC AT 85 °C; 40 VDC AT 125 °C
47
T1 2.0
1
5
44
-25 +8 +12
1050
ST47-60T1MI
150
T2 1.1
2
10
20
-40 +8 +15
1800
ST150-60T2MI
370
L2 0.6
3
25
9
-33 +9 +20
2900
ST370-60L2MI
390
T3 0.9
3
25
15
-45 +8 +15
2100
ST390-60T3MI
560
T4 0.8
5
40
10
-58 +8 +15
2750
ST560-60T4MI
75 VDC AT 85 °C; 50 VDC AT 125 °C
33
T1 2.5
1
5
66
-25 +5 +9
1050
ST33-75T1MI
110
T2 1.3
2
10
24
-35 +6 +10
1650
ST110-75T2MI
250
L2 0.8
5
30
12
-30 +6 +15
2500
ST250-75L2MI
330
T3 1.0
3
30
12
-45 +6 +10
2100
ST330-75T3MI
470
T4 0.9
5
50
12
-50 +6 +10
2750
ST470-75T4MI
Notes
• (K = ± 10 %, M = ± 20 %) and insulation letter (I = insulation, X = uninsulated)
• Part numbers shown are for units with ± 20 % capacitance tolerance and uninsulated capacitors. For ± 10 units, change the digit following
the letter “X” from “0” to “9”. For units with outer plastic-film insulation, substitute “2” for “0” at the end of the part number
• For RoHS-compliant add “E3” for suffix
Revision: 06-Jul-15
2 Document Number: 43000
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000




PDF 파일 내의 페이지 : 총 6 페이지

제조업체: Vishay

( vishay )

ST100-125T3MI capacitor

데이터시트 다운로드
:

[ ST100-125T3MI.PDF ]

[ ST100-125T3MI 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


ST100-125T3MI

Wet Tantalum Capacitors - Vishay