파트넘버.co.kr DF-G1 데이터시트 PDF


DF-G1 반도체 회로 부품 판매점

Expert Dual Display Fiber Amplifier Manual



Banner Engineering 로고
Banner Engineering
DF-G1 데이터시트, 핀배열, 회로
www.DataSheet.co.kr
DF-G1 - Expert Dual Display Fiber Amplifier Manual
Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies
Features
• Easy to read dual digital displays show both signal level and threshold simultaneously
• Lever action fiber clamp provides stable, reliable, and trouble-free fiber clamping
• Simple user interface ensures easy sensor set-up and programming via displays and
switches/buttons, or remote input teach wire
Expert TEACH and SET methods ensure optimal gain and threshold for all applica-
tions, especially low contrast applications
• User has full control over all operating parameters: threshold, Light Operate or Dark
Operate, output timing functions, gain level, and response speed
• Thermally stable electronics minimize warm-up drift and the effect of side-by-side
mounting of multiple fiber amplifiers
• ECO (economy) display mode reduces amplifier power consumption by 25%
• Cross talk avoidance algorithm allows two sensors to operate in close proximity for
many applications
• Response speeds of: 200 µs (High Speed), 500 µs (Standard), 2 ms (Long Range),
and 5 ms (Extra Long Range) allow operator to optimize for fast or long distance ap-
plications
• Sleek 10 mm wide housing mounts to 35 mm DIN standard rail
• Visible red LED sensing beam
Models
Model
DF-G1-NS-2M
DF-G1-PS-2M
DF-G1-NS-Q3
DF-G1-PS-Q3
DF-G1-NS-Q7
DF-G1-PS-Q7
Outputs
Single NPN
Single PNP
Single NPN
Single PNP
Single NPN
Single PNP
Connector*
2 m (6.5') cable, 4-wire
150 mm (6") PVC pigtail, M8 Pico QD connector, 4-
pin
Integral M8 Pico QD connector, 4-pin
* Connection options: A model with a QD connector requires a mating cordset (see Quick-Disconnect Cordsets on page 26).
For 9 m cable, change the suffix 2M to 9M in the 2 m model number (example, DF-G1-NS-9M).
For M12 Euro QD pigtail change the suffix 2M to Q5 in the 2 m model number (example, DF-G1-NS-Q5).
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to seri-
ous injury or death. This product does NOT include the self-checking redundant circuitry necessary to
allow its use in personnel safety applications. A sensor failure or malfunction can cause either an ener-
gized or de-energized sensor output condition.
P/N 161999 Rev. A
1/12/2012
0 161999 7
Datasheet pdf - http://www.DataSheet4U.net/


DF-G1 데이터시트, 핀배열, 회로
www.DataSheet.co.kr
DF-G1 - Expert Dual Display Fiber Amplifier Manual
Overview
The DF-G1 is an easy-to-use, DIN-rail-mountable fiber optic sensor. It provides high-performance sensing in low-contrast applications.
The sensor’s compact housing has dual digital displays (Red/Green) and a bright output LED for easy programming and status monitor-
ing during operation. The sensor features a single discrete output, either NPN or PNP, by model.
The DF-G1 features increased temperature compensation compared with previous fiber optic sensors. An accessory clamp is available to
secure a bank of connected sensors together on a DIN rail (see Accessories on page 27).
Figure 1. DF-G1 Model Features
1 Output LED
2 LO/DO Switch
3 RUN/PRG/ADJ Mode Switch
4 Lever Action Fiber Clamp (see Dimen-
sions on page 25)
5 Red Signal Level
6 Green Threshold
7 +/SET/- Rocker Button
Top Panel Interface
Opening the dust cover provides access to the top panel interface. The top panel interface consists of the RUN/PRG/ADJ mode switch,
LO/DO switch, +/SET/- rocker button, dual red/green digital displays, and output LED.
RUN/PRG/ADJ Mode Switch
The RUN/PRG/ADJ mode switch puts the sensor in RUN, PRG (Program), or ADJ (Adjust) mode. RUN mode allows the
sensor to operate normally and prevents unintentional programming changes via the +/SET/- button. PRG mode allows
the sensor to be programmed through the display driven programming menu (see Program Mode on page 3 ). ADJ
mode allows the user to perform Expert TEACH/SET methods and Manual Adjust (see Adjust Mode on page 7 ).
LO/DO Switch
The LO/DO switch is used to select Light Operate or Dark Operate mode. In Light Operate mode, the output is ON when
the sensing condition is above the threshold (for Window SET, the output is ON when the sensing condition is inside the
window). In Dark Operate mode, the output is ON when the sensing condition is below the threshold (for Window SET,
the output is ON when the sensing condition is outside the window).
+/SET/- Rocker Button
The +/SET/- rocker button is a 3-way button. The +/- positions are engaged by rocking the button left/right. The SET
position is engaged by clicking down the button while the rocker is in the middle position. All three button positions are
used during PRG mode to navigate the display driven programming menu. During ADJ mode, SET is used to perform
TEACH/SET methods and +/- are used to manually adjust the threshold(s). The rocker button is disabled during RUN
mode, except when using Window SET, see Figure 8. on page 12 .
Red/Green Digital Displays
During RUN and ADJ mode, the Red display shows the signal level and the Green display shows the threshold. During
PRG mode, both displays are used to navigate the display driven programming menu.
Output LED
The output LED provides a visible indication when the output is activated.
Run Mode
Run mode allows the sensor to operate normally and prevents unintentional programming changes. The +/SET/- rocker button is disabled
during RUN mode, except when using Window SET, see Figure 8. on page 12 .
2
www.bannerengineering.com - tel: 763-544-3164
P/N 161999 Rev. A
Datasheet pdf - http://www.DataSheet4U.net/




PDF 파일 내의 페이지 : 총 27 페이지

제조업체: Banner Engineering

( banner )

DF-G1 amplifier

데이터시트 다운로드
:

[ DF-G1.PDF ]

[ DF-G1 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


DF-G1

Expert Dual Display Fiber Amplifier Manual - Banner Engineering



DF-G1

Expert Fiber Amplifier Install Sheet - Banner Engineering