파트넘버.co.kr BD5427MUV 데이터시트 PDF


BD5427MUV 반도체 회로 부품 판매점

Analog Input / BTL Output Class-D Speaker Amplifier



ROHM Semiconductor 로고
ROHM Semiconductor
BD5427MUV 데이터시트, 핀배열, 회로
www.DataSheet4U.com
Middle Power Class-D Speaker Amplifiers
Analog Input / BTL Output
Class-D Speaker Amplifier
BD5427MUV
No.10075EBT07
Description
BD5427MUV is a 7W + 7W stereo class-D power amplifier IC, developed for space-saving and low heat-generation
applications such as low-profile TV sets. The IC employs state-of-the-art Bipolar, CMOS, and DMOS (BCD) process
technology that eliminates turn-on resistance in the output power stage and internal loss due to line resistances up to an
ultimate level. With this technology, the IC has achieved high efficiency of 80% (7W + 7W output with 8load), which is the
top class in the industry. The IC, in addition, employs a compact back-surface heat radiation type power package to achieve
low power consumption and low heat generation and eliminates necessity of installing an external radiator, up to a total
output of 14W. This product satisfies both needs for drastic downsizing, low-profile structures and powerful, high-quality
playback of the sound system.
Features
1) A high efficiency of 80% (7W + 7W output with 8load), which is the highest grade in the industry and low heat-generation.
2) Driving a lowest rating load of 6is allowed.
3) Pop noise upon turning power on/off and power interruption has been reduced.
4) High-quality audio muting is implemented by soft-switching technology.
5) High-reliability design provided with built-in protection circuits against high temperatures, against VCC shorting and
GND shorting, against reduced-voltage, and against applying DC voltage to speaker.
6) A master/slave function allowing synchronization of multiple devices reduces beat noises.
7) Adjustment of internal PWM sampling clock frequencies (250kHz to 400kHz) allows easy protective measures
against unwanted radio emission to AM radio band.
8) A compact back-surface heat radiation type power package is employed.
VQFN048V7070 7.0mm × 7.0mm × 1.0mm, pitch 0.5mm
Absolute Maximum Ratings
A circuit must be designed and evaluated not to exceed absolute maximum rating in any cases and even momentarily, to prevent
reduction in functional performances and thermal destruction of a semiconductor product and secure useful life and reliability.
The following values assume Ta =25. For latest values, refer to delivery specifications.
Parameter
Symbol
Rating
Unit
Conditions
Supply voltage
Power dissipation
VCC
+20
V
Pin 2, 14, 15, 22, 23, 38, 39, 46, 47
(Note 1, 2)
3.28 W (Note 3)
Pd 4.8 W (Note 4)
Input voltage for signal pin
VIN -0.2 ~ +7.2 V Pin 6, 7 (Note 1)
Input voltage for control pin
VCONT -0.2 ~ Vcc+0.2
V Pin 28, 32 (Note 1)
Input voltage for clock pin
VOSC
-0.2 ~ +7.2
V Pin 31 (Note 1)
Operating temperature range
Topr -40 ~ +85
Storage temperature range
Tstg -55 ~ +150
Maximum junction temperature
Tjmax
+150
(Note 1)
(Note 2)
(Note 3)
(Note 4)
A voltage that can be applied with reference to GND (pins 5, 18, 19, 42, and 43)
Pd and Tjmax=150must not be exceeded.
114.3mm × 76.2mm × 1.6mm FR4 2-layer glass epoxy board (Copper Area 5505mm2) installed.
If used under Ta=25or higher, reduce 26.2mW for increase of every 1. The board is provided with thermal via.
114.3mm × 76.2mm × 1.6mm FR4 4-layer glass epoxy board (Copper Area 5505mm2) installed.
If used under Ta=25or higher, reduce 38.4mW for increase of every 1. The board is provided with thermal via.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
1/15
2010.05 - Rev.B


BD5427MUV 데이터시트, 핀배열, 회로
BD5427MUV
Operating Conditions
The following values assume Ta =25. Check for latest values in delivery specifications.
Parameter
Symbol
Rating
Unit
Technical Note
www.DataSheet4U.com
Conditions
Supply voltage
VCC +10 ~ +16.5 V Pin 2, 14, 15, 22, 23, 38, 39, 46, 47
Load resistance
(Note 5) Pd should not be exceeded.
RL
6 ~ 16
(Note 5)
Electrical Characteristics
Except otherwise specified Ta = 25, VCC = 12V, fIN = 1kHz, Rg = 0, RL = 8MUTEX="H", MS="L"
For latest values, refer to delivery specifications.
Parameter
Symbol
Limits
Unit
Conditions
Whole circuit
Circuit current 1 (Sampling mode)
ICC1
25
mA With no signal
Circuit current 2 (Muting mode)
ICC2
10
mA MUTEX = “L”
Control circuit
“H” level input voltage
VIH 2.3 ~ 12 V MUTEX, MS
“L” level input voltage
VIL 0 ~ 0.8 V MUTEX, MS
Audio circuit
Voltage gain
GV 28 dB PO = 1W
Maximum output power (Note 6)
PO
7 W THD+N = 10%
Total harmonic distortion (Note 6)
THD
0.1
% PO = 1W, BW=20Hz ~ 20kHz
Crosstalk
CT 85 dB PO = 1W, Rg = 0, BW = IHF-A
Output noise voltage
(Sampling mode)
Residual noise voltage
(Muting mode)
VNO
VNOM
80 µVrms Rg = 0, BW = IHF-A
1 µVrms Rg = 0, BW = IHF-A, MUTEX = “L”
Internal sampling clock frequency
FOSC
250
kHz MS = “L” (In master operation)
(Note 6) The rated values of items above indicate average performances of the device, which largely depend on circuit layouts, components,
and power supplies. The reference values are those applicable to the device and components directly installed on a board specified by us.
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
2/15
2010.05 - Rev.B




PDF 파일 내의 페이지 : 총 16 페이지

제조업체: ROHM Semiconductor

( rohm )

BD5427MUV amplifier

데이터시트 다운로드
:

[ BD5427MUV.PDF ]

[ BD5427MUV 다른 제조사 검색 ]




국내 전력반도체 판매점


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877

[ 홈페이지 ]

IGBT, TR 모듈, SCR, 다이오드모듈, 각종 전력 휴즈

( IYXS, Powerex, Toshiba, Fuji, Bussmann, Eaton )

전력반도체 문의 : 010-3582-2743



일반적인 전자부품 판매점


디바이스마트

IC114

엘레파츠

ICbanQ

Mouser Electronics

DigiKey Electronics

Element14


관련 데이터시트


BD5427MUV

Analog Input / BTL Output Class-D Speaker Amplifier - ROHM Semiconductor