|
Intersil Corporation |
HA-5137/883
June 1998
60MHz, Ultra Low Noise, Precision
Operational Amplifier
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . 14V/µs (Min)
• Wide Gain Bandwidth (AV ≥ 5) . . . . . . . . . 60MHz (Min)
• Low Noise (at 1kHz) . . . . . . . . . . . . . . . 4.5nV/√Hz (Max)
• Low Offset Voltage. . . . . . . . . . . . . . . . . . . .100µV (Max)
• Low Offset Drift With Temperature. . . . 1.8µV/oC (Max)
• High CMRR . . . . . . . . . . . . . . . . . . . . . . . . . . 100dB (Min)
• High Voltage Gain . . . . . . . . . . . . . . . . . . 700kV/V (Min)
The HA-5137/883 monolithic operational amplifier features
an excellent combination of precision DC and wideband high
speed characteristics. Utilizing the Intersil DI technology and
advanced processing techniques, this unique design unites
low noise precision instrumentation performance with high
speed, wideband capability.
This amplifier’s impressive list of features include low VOS,
wide gain-bandwidth, high open loop gain, and high CMRR.
Additionally, this flexible device operates over a wide supply
range while consuming only 120mW of power.
Using the HA-5137/883 allows designers to minimize errors
while maximizing speed and bandwidth in applications
requiring gains greater than five.
Applications
• High Speed Signal Conditioners
• Wide Bandwidth Instrumentation Amplifiers
• Low Level Transducer Amplifiers
• Fast, Low Level Voltage Comparators
• Highest Quality Audio Preamplifiers
• Pulse/RF Amplifiers
This device is ideally suited for low level transducer signal
amplifier circuits. Other applications which can utilize the
HA-5137/883’s qualities include instrumentation amplifiers,
pulse or RF amplifiers, audio preamplifiers, and signal
conditioning circuits.
Ordering Information
PART NUMBER
HA2-5137/883
TEMP.
RANGE (oC)
PACKAGE
-55 to 125 8 Pin Metal Can
PKG.
NO.
T8.C
HA4-5137/883
-55 to 125 20 Ld CLCC
J20.A
HA7-5137/883
-55 to 125 8 Ld CERDIP
F8.3A
Pinouts
HA-5137/883
(CERDIP)
TOP VIEW
BAL 1
-IN 2
+IN 3
V- 4
-
+
8 BAL
7 V+
6 OUT
5 NC
HA-5137/883
(CLCC)
TOP VIEW
3 2 1 20 19
NC 4
-IN 5
NC 6
+IN 7
-
+
18 NC
17 V+
16 NC
15 OUT
NC 8
14 NC
9 10 11 12 13
HA-5137/883
(METAL CAN)
TOP VIEW
BAL
BAL 1
8
7 V+
-IN 2
-
+
6 OUT
+IN 3
4
V- (CASE)
5 NC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
Spec Number 511034-883
File Number 3714.1
HA-5137/883
Absolute Maximum Ratings
Voltage Between V+ and V- Terminals . . . . . . . . . . . . . . . . . . . . 44V
Differential Input Voltage (Note 1). . . . . . . . . . . . . . . . . . . . . . . . 0.7V
Voltage at Either Input Terminal . . . . . . . . . . . . . . . . . . . . . . V+ to V-
Input Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA
Output Current . . . . . . . . . . . . . . . . . . . Full Short Circuit Protection
ESD Rating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2000V
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC
Supply Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 15V
VINCM ≤ 1/2 (V+ - V-)
RL ≥ 600Ω
Thermal Information
Thermal Resistance (Typical, Note 2)
θJA (oC/W) θJC (oC/W)
CERDIP Package . . . . . . . . . . . . . . . . 115
28
CLCC Package . . . . . . . . . . . . . . . . . .
85
26
Metal Can Package . . . . . . . . . . . . . . . 155
67
Package Power Dissipation Limit at 75oC for TJ ≤ 175oC
CERDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 870mW
CLCC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.18W
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 645mW
Package Power Dissipation Derating Factor Above 75oC
CERDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.7mW/oC
CLCC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.8mW/oC
Metal Can Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5mW/oC
Maximum
Maximum
Junction Temperature (TJ) . .
Storage Temperature Range
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . 175oC
-65oC to150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. For differential input voltages greater than 0.7V, the input current must be limited to 25mA to protect the back-to-back input diodes.
2. θJA is measured with the component mounted on an evaluation PC board in free air.
TABLE 1. DC ELECTRICAL PERFORMANCE SPECIFICATIONS
Device Tested at: VSUPPLY = ±15V, RSOURCE = 50Ω, RLOAD = 100kΩ, VOUT = 0V, Unless Otherwise Specified.
PARAMETER
SYMBOL
CONDITIONS
GROUP A
SUBGROUPS
TEMP. (oC)
MIN
Input Offset Voltage
VIO VCM = 0V
1 25 -100
2, 3
125, -55
-300
Input Bias Current
IB VCM = 0V,
RS = 10kΩ, 50Ω
--+---I--B------2+---------I--B----
1 25 -
2, 3
125, -55
-
Input Offset Current
Common Mode
Range
IIO
+CMR
VCM = 0V,
+RS = 10kΩ,
-RS = 10kΩ
V+ = +4.7V,
V- = -25.3V
1 25 -75
2, 3
125, -55
-135
1 25 10.3
2, 3
125, -55
10.3
-CMR
V+ = 25.3V,
V- = -4.7V
1 25 -
2, 3
125, -55
-
Large Signal Voltage
Gain
+AVOL
VOUT = 0V and +10V,
RL = 2kΩ
4
5, 6
25
125, -55
700
300
-AVOL
VOUT = 0V and -10V,
RL = 2kΩ
4
5, 6
25
125, -55
700
300
Common Mode
Rejection Ratio
+CMRR
-CMRR
∆VCM = +11V
∆VCM = +10V
∆VCM = -11V
∆VCM = -10V
1 25 100
2, 3
125, -55
100
1 25 100
2, 3
125, -55
100
MAX
100
300
80
150
75
135
-
-
-10.3
-10.3
-
-
-
-
-
-
-
-
UNITS
µV
µV
nA
nA
nA
nA
V
V
V
V
kV/V
kV/V
kV/V
kV/V
dB
dB
dB
dB
Spec Number 511034-883
2
|