|
Micropac Industries |
42109
OPERATIONAL AMPLIFIER
DSCC DWG #5962-9065901
Replacement for PA12
Mii
HYBRID MICROELECTRONICS
PRODUCTS DIVISION
Features:
• Wide Supply Voltage Range (±10 to ±50 Volts)
• High Output Current (15A Peak)
• Small Size (TO-3, 8 Pins)
• Low Cost
Applications:
• Motor, Valve and Actuator Control
• Magnetic Deflection Circuits
• Audio Amplifiers
• Power Transducers
DESCRIPTION
The 42109, DSCC drawing #5962-9065901 is a high power, high voltage, high current, power operational amplifier and is a
replacement for the PA12. The Op Amp is designed to drive capacitive, inductive and sensitive loads. The device is
complete with current limiting using external resistors, and fabricated using hybrid techniques to maximize reliability,
minimize size and give top performance.
ABSOLUTE MAXIMUM RATINGS
Power Supply Voltage (VCC) ................................................................................................................................. ±50VDC
Differential Input Voltage ......................................................................................................................................±VCC -3V
Common Mode Input Voltage .....................................................................................................................................±VCC
Operating Temperature Range (case) .................................................................................................... -55°C to +125°C
Storage Temperature Range ................................................................................................................... -65°C to +150°C
Output Current .................................................................................................................................................... 15A Peak
Power Dissipation at TC = 25°C ................................................................................................................................125W
Lead Temperature (Soldering < 10 sec)................................................................................................................. +300°C
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
42109
OPERATIONAL AMPLIFIER DESC DWG #5962-9065901
Mechanical Configuration
A
BC
SEATING PLANE
Q
D
H
GJ
F
23
14
8
7
5
6
EK
R
Note: Leads in true position with 0.010” (0.25mm) R at MMC at seating plane
Pin Numbers shown for reference only. Numbers may not be marked on package.
INCHES
MILLIMETERS
DIM
MIN MAX MIN MAX
A 1.510 1.550 38.35 39.37
B 0.760 0.780 19.30 19.81
C
0.290
7.37
D 0.97 1.07 0.038 0.042
E
0.080 0.100
2.03
2.54
F 40º BASIC
40º BASIC
G .500 BASIC
12.7 BASIC
H 1.186 BASIC 30.12 BASIC
J
.593 BASIC
15.06 BASIC
K 0.460 0.500 11.68 12.70
Q
0.151 0.161
3.84
4.09
R 0.990 1.010 25.15 25.65
ELECTRICAL
CONNECTIONS
Pin 1
Pin 2
Output 1
CL +
Pin 3
Pin 4
+VC
+IN
Pin 5
-IN
Pin 6
Pin 7
-VC
N.C.
Pin 8
CL-
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281
|