|
New Japan Radio |
NJG1150UA2
GNSS LOW NOISE AMPLIFIER
I GENERAL DESCRIPTION
The NJG1150UA2 is a low noise amplifier GaAs MMIC designed for GNSS
(Global Navigation Satellite Systems).
The NJG1150UA2 is featured low noise figure and low distortion, and
operates from 1.5V to 3.3V single voltage. The NJG1150UA2 has stand-by
mode to save the supply current, has the on-chip ESD protection devices.
The NJG1150UA2 achieves very small mounting area by only two external
components and very small package that is lead-free and halogen-free 6-pin
EPFFP6-A2 package.
I PACKAGE OUTLINE
NJG1150UA2
I APPLICATIONS
GNSS applications, like GPS, Galileo, GLONASS and COMPASS.
I FEATURES
G Low supply voltage
G Low current consumption
G High gain
G Low noise figure
G High input IP3
G High out of band input IP3
G Small package
G RoHS compliant and Halogen Free
G MSL1
1.8/ 2.8V typ.
4.2 / 4.9mA typ. @VDD=1.8/ 2.8V, VCTL=1.8V
0.1µA typ.
@VDD=1.8/ 2.8V, VCTL=0V (Stand-by mode)
16.0dB typ. @VDD=1.8/ 2.8V, VCTL=1.8V, f=1575MHz
0.6dB typ.
@VDD=1.8/ 2.8V, VCTL=1.8V, f=1575MHz
-1 / +1dBm typ. @VDD=1.8/ 2.8V, VCTL=1.8V, f=1575+1575.1MHz
+5 / +6dBm typ. @VDD=1.8/ 2.8V, VCTL=1.8V, f=1712.7+1850MHz
EPFFP6-A2 (Package size: 1.0mmx1.0mmx0.37mm typ.)
I PIN CONFIGURATION
6
VCTL
1Pin INDEX
(Top View)
GND 5
4
VDD
RFIN
1
2
GND
RFOUT
3
Pin connection
1. RFIN
2. GND
3. RFOUT
4. VDD
5. GND
6. VCTL
I TRUTH TABLE
“H”=VCTL(H), “L”=VCTL(L)
VCTL
LNA Mode
H Active mode
L Stand-by mode
Note: Specifications and description listed in this datasheet are subject to change without notice.
Ver.2014-06-30
-1-
I ABSOLUTE MAXIMUM RATINGS
PARAMETERS
Supply voltage
Control voltage
Input power
Power dissipation
Operating temperature
Storage temperature
SYMBOL
CONDITIONS
VDD
VCTL
PIN
PD
Topr
Tstg
VDD=2.8V
4-layer FR4 PCB with through-hole
(101.5mmx114.5mm), Tj=150°C
NJG1150UA2
Ta=+25°C, Zs=Zl=50Ω
RATINGS UNITS
5.0 V
5.0 V
+15 dBm
590 mW
-40~+85
°C
-55~+150
°C
I ELECTRICAL CHARACTERISTICS 1 (DC)
PARAMETER
Supply Voltage
Control Voltage (High)
Control Voltage (Low)
Supply Current1
Supply Current2
Supply Current3
Supply Current4
Control Current
SYMBOL
CONDITIONS
VDD
VCTL(H)
VCTL(L)
IDD1
IDD2
IDD3
IDD4
ICTL
Active mode,
VDD=2.8V, VCTL=1.8V
Active mode,
VDD=1.8V, VCTL=1.8V
Stand-by mode,
VDD=2.8V, VCTL=0V
Stand-by mode,
VDD=1.8V, VCTL=0V
VCTL=1.8V
General conditions: Ta=+25°C
MIN TYP MAX UNITS
1.5 - 3.3 V
1.5 1.8 3.3
V
0 0 0.3 V
- 4.9 8.0 mA
- 4.2 7.0 mA
- 0.1 3.0 µA
- 0.1 3.0 µA
- 5.0 12.0 µA
-2-
|